Skip to content
worldfires
RU · Russia · –

Evenkiysky Rayon fire, 12 July 2019 Evenkiysky Rayon

Out · last detection 25 Jul 2019, 19:14 UTC

The fire started on 12 July 2019 in Evenkiysky Rayon, Russia, and satellites saw it burning for 14 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 11,155 hectares from heat detections, spread across a single municipality.

It is the 140th largest in Krasnoyarsk Krai since 2016 (of 538 with a page). Number 151 in Russia in 2019, of 610.

Burnt area
11,155ha
GWIS perimeter (Copernicus)
Duration
14days
12 Jul 2019 – 25 Jul 2019
Municipalities hit
1
districts
Started on
12 Jul
2019
Heat detections
1,648
in a single hotspot: 121 MW
Danger at start
19
Moderate · FWI index
Average daily power
797MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 12 Jul25 Jul
25 Jul 2019

How it evolved, day by day

12 Jul 2019 · 1 MW · 2 13 Jul 2019 · 29 MW · 7 14 Jul 2019 · 5 MW · 1 15 Jul 2019 · 130 MW · 14 16 Jul 2019 · 129 MW · 19 17 Jul 2019 · 355 MW · 39 18 Jul 2019 · 80 MW · 20 19 Jul 2019 · 794 MW · 51 20 Jul 2019 · 3,562 MW · 304 21 Jul 2019 · 2,983 MW · 390 22 Jul 2019 · 1,586 MW · 365 23 Jul 2019 · 1,015 MW · 223 24 Jul 2019 · 254 MW · 118 25 Jul 2019 · 234 MW · 95
12 Jul 15 Jul 20 Jul 24 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

30°high
63km/h · peak gust
28%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 9.4 mm on 1 Aug.

This area had burned before

0% of the perimeter overlaps earlier fires recorded since 2016: 9 ha in 2017.

How big is it?

10 km
It burned the equivalent of 7% of the area of London (112 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Evenkiysky Rayon where it started
    9,557 ha reached on 12 Jul
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
12 Jul 20.3 °C 49 % 40 km/h 0.0 mm Moderate 19
13 Jul 25.8 °C 36 % 33 km/h 0.0 mm High 27
14 Jul 26.3 °C 40 % 22 km/h 0.1 mm Moderate 19
15 Jul 25.8 °C 41 % 45 km/h 0.0 mm High 38
16 Jul 28.7 °C 42 % 38 km/h 0.0 mm High 31
17 Jul 30.4 °C 34 % 34 km/h 0.0 mm High 33
18 Jul 26.5 °C 38 % 43 km/h 0.0 mm High 36
19 Jul 20.8 °C 31 % 53 km/h 0.0 mm Very high 44
20 Jul 20.4 °C 29 % 63 km/h 0.0 mm Extreme 53
21 Jul 22.7 °C 33 % 44 km/h 0.0 mm Very high 41
22 Jul 25.4 °C 28 % 35 km/h 0.0 mm High 36
23 Jul 26.2 °C 29 % 26 km/h 0.0 mm High 33
24 Jul 26.1 °C 34 % 14 km/h 0.0 mm High 24
25 Jul 28.1 °C 36 % 18 km/h 0.0 mm High 29
26 Jul after 26.9 °C 42 % 16 km/h 0.0 mm High 24
27 Jul after 25.4 °C 61 % 27 km/h 0.0 mm High 23
28 Jul after 24.5 °C 47 % 38 km/h 0.4 mm High 29
29 Jul after 24.6 °C 41 % 28 km/h 0.0 mm High 23
30 Jul after 25.8 °C 39 % 21 km/h 0.0 mm High 26
31 Jul after 25.9 °C 37 % 25 km/h 0.0 mm High 29
1 Aug after 19.1 °C 81 % 22 km/h 9.4 mm Very low 4

Its twins: fires that started in the same weather

It started with an FWI of 19.1, a minimum humidity of 49% and rain the day before. Fires in the area that started in weather like this since 2016: 44.

FWI at the start 19.1
Minimum humidity 49 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Evenkiysky Rayon fire, July 2016
18,058 ha 24 days FWI 16.9 Min. humidity 50 % 90 km away, in 2016

First rain (1 mm or more) after it ended: 9.1 mm on 27 Jul.

What happened to them

15 days
median duration
5,794 ha
median area
32 %
went past 10,000 ha
4.2 mm
rain at the end (median; 44 of 44 had it)

It was 1.9 times larger than the median of its twins and lasted 14 days, against 15 days.

Only 12 of its 44 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 4.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

9.4 mmfirst rain
1 Aug7 days after it ended
63km/h · max. gust

It was considered over on 25 Jul, and on 1 Aug 9.4 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 44 of 44, with a median of 4.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 5 Jul 2019
After · 1 Aug 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 1,648Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Evenkiysky Rayon fire last?
GWIS (Copernicus) dates it between 12 July 2019 and 25 July 2019: 14 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 11,155 hectares (111.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Evenkiysky Rayon (9,557 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 30.4 °C, humidity dropped to 28 % and gusts hit 63 km/h. The fire danger index (FWI) reached 53, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 44. Their median duration was 15 days and their median area 5,794 ha; 32 % went past 10,000 ha. Only 12 of its 44 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 4.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 1,648 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.