Skip to content
worldfires
RU · Russia · –

Evenkiysky Rayon fire, 5 August 2017 Evenkiysky Rayon

Out · last detection 22 Aug 2017, 04:49 UTC

The fire started on 5 August 2017 in Evenkiysky Rayon, Russia, and satellites saw it burning for 18 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 9,173 hectares from heat detections, spread across a single municipality.

It is the 188th largest in Krasnoyarsk Krai since 2016 (of 538 with a page). Number 79 in Russia in 2017, of 367.

Burnt area
9,173ha
GWIS perimeter (Copernicus)
Duration
18days
5 Aug 2017 – 22 Aug 2017
Municipalities hit
1
districts
Started on
5 Aug
2017
Heat detections
1,750
in a single hotspot: 64 MW
Danger at start
12
Moderate · FWI index
Average daily power
487MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 5 Aug22 Aug
22 Aug 2017

How it evolved, day by day

5 Aug 2017 · 4 MW · 2 6 Aug 2017 · 50 MW · 17 7 Aug 2017 · 305 MW · 77 8 Aug 2017 · 225 MW · 71 9 Aug 2017 · 219 MW · 72 10 Aug 2017 · 399 MW · 68 11 Aug 2017 · 233 MW · 80 12 Aug 2017 · 425 MW · 119 13 Aug 2017 · 1,646 MW · 291 14 Aug 2017 · 792 MW · 200 15 Aug 2017 · 11 MW · 5 16 Aug 2017 · 257 MW · 32 17 Aug 2017 · 19 MW · 7 19 Aug 2017 · 150 MW · 92 20 Aug 2017 · 658 MW · 209 21 Aug 2017 · 1,380 MW · 296 22 Aug 2017 · 1,513 MW · 112
5 Aug 9 Aug 13 Aug 17 Aug 22 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

31°high
51km/h · peak gust
29%lowest humidity

It had gone 4 days without rain (1 mm or more) when it started. Rain came after the fire: 6.7 mm on 23 Aug.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 5.8% of the area of London (92 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Evenkiysky Rayon where it started
    8,942 ha reached on 5 Aug
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
5 Aug 30.3 °C 39 % 32 km/h 0.0 mm Moderate 12
6 Aug 30.6 °C 35 % 29 km/h 0.1 mm Moderate 13
7 Aug 31.1 °C 29 % 30 km/h 0.0 mm Moderate 17
8 Aug 30.9 °C 32 % 41 km/h 0.0 mm Moderate 19
9 Aug 31.4 °C 35 % 20 km/h 0.1 mm Moderate 17
10 Aug 28.0 °C 36 % 44 km/h 0.1 mm Moderate 21
11 Aug 22.4 °C 45 % 33 km/h 0.6 mm Moderate 15
12 Aug 25.4 °C 40 % 30 km/h 0.0 mm Moderate 15
13 Aug 30.1 °C 31 % 44 km/h 0.0 mm High 22
14 Aug 29.5 °C 37 % 51 km/h 0.6 mm High 22
15 Aug 16.7 °C 49 % 44 km/h 0.0 mm Moderate 18
16 Aug 17.2 °C 34 % 28 km/h 0.0 mm Moderate 15
17 Aug 17.5 °C 35 % 22 km/h 0.0 mm Moderate 14
18 Aug 19.3 °C 41 % 26 km/h 0.0 mm Moderate 15
19 Aug 20.6 °C 57 % 38 km/h 0.0 mm Moderate 14
20 Aug 22.2 °C 39 % 36 km/h 0.0 mm Moderate 16
21 Aug 19.7 °C 45 % 30 km/h 0.0 mm Moderate 17
22 Aug 15.3 °C 33 % 38 km/h 0.4 mm Moderate 19
23 Aug after 12.7 °C 64 % 22 km/h 6.7 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 11.7, a minimum humidity of 39% and 4 days without rain. Fires in the area that started in weather like this since 2016: 35.

FWI at the start 11.7
Minimum humidity 39 %
Days without rain 4
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Evenkiysky Rayon fire, July 2019
16,251 ha 28 days FWI 11.2 Min. humidity 37 % 67 km away, in 2019

First rain (1 mm or more) after it ended: 1.3 mm on 13 Aug.

What happened to them

13 days
median duration
6,388 ha
median area
31 %
went past 10,000 ha
4.7 mm
rain at the end (median; 34 of 35 had it)

It burned an area similar to its twins (9,173 ha against a median of 6,388 ha) and lasted 18 days, against 13 days.

In 1 of 35, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.7 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

6.7 mmfirst rain
23 Augthe day after it ended
51km/h · max. gust

It was considered over on 22 Aug, and on 23 Aug 6.7 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 34 of 35, with a median of 4.7 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 29 Jul 2017
After · 29 Aug 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 1,750Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Evenkiysky Rayon fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 5 August 2017 to 22 August 2017 (18 days). The perimeter dates it from 6 August 2017 to 22 August 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 9,173 hectares (91.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Evenkiysky Rayon (8,942 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 31.4 °C, humidity dropped to 29 % and gusts hit 51 km/h. The fire danger index (FWI) reached 22, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 35. Their median duration was 13 days and their median area 6,388 ha; 31 % went past 10,000 ha. In 1 of 35, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.7 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 6 August 2017 → 5 August 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 6 August 2017 to 22 August 2017. 1,750 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.