Skip to content
worldfires
RU · Russia · –

Evenkiysky Rayon fire, 13 September 2016 Evenkiysky Rayon

Out · last detection 28 Sept 2016, 05:38 UTC

The fire started on 13 September 2016 in Evenkiysky Rayon, Russia, and satellites saw it burning for 16 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,782 hectares from heat detections, spread across a single municipality.

It is the 440th largest in Krasnoyarsk Krai since 2016 (of 538 with a page). Number 549 in Russia in 2016, of 692.

Burnt area
3,782ha
GWIS perimeter (Copernicus)
Duration
16days
13 Sept 2016 – 28 Sept 2016
Municipalities hit
1
districts
Started on
13 Sept
2016
Heat detections
737
in a single hotspot: 82 MW
Danger at start
16
Moderate · FWI index
Average daily power
284MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 13 Sept28 Sept
28 Sept 2016

How it evolved, day by day

13 Sept 2016 · 6 MW · 3 14 Sept 2016 · 59 MW · 20 15 Sept 2016 · 125 MW · 37 16 Sept 2016 · 341 MW · 103 17 Sept 2016 · 1,115 MW · 169 18 Sept 2016 · 722 MW · 163 19 Sept 2016 · 411 MW · 59 22 Sept 2016 · 8 MW · 2 24 Sept 2016 · 1 MW · 1 25 Sept 2016 · 7 MW · 3 26 Sept 2016 · 28 MW · 5 27 Sept 2016 · 657 MW · 143 28 Sept 2016 · 211 MW · 29
13 Sept 17 Sept 25 Sept 28 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

22°high
41km/h · peak gust
24%lowest humidity

It had gone 16 days without rain (1 mm or more) when it started. Rain came after the fire: 1.3 mm on 29 Sept.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 2.4% of the area of London (38 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Evenkiysky Rayon where it started
    3,218 ha reached on 13 Sept
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
13 Sept 18.5 °C 29 % 32 km/h 0.0 mm Moderate 16
14 Sept 19.5 °C 30 % 34 km/h 0.0 mm Moderate 17
15 Sept 20.2 °C 24 % 31 km/h 0.0 mm Moderate 18
16 Sept 21.7 °C 30 % 30 km/h 0.0 mm Moderate 18
17 Sept 21.5 °C 25 % 32 km/h 0.0 mm Moderate 20
18 Sept 19.4 °C 33 % 30 km/h 0.0 mm Moderate 19
19 Sept 15.5 °C 59 % 26 km/h 1.6 mm Very low 4
20 Sept 12.8 °C 50 % 35 km/h 0.0 mm Low 7
21 Sept 11.0 °C 50 % 36 km/h 0.0 mm Low 10
22 Sept 10.7 °C 51 % 27 km/h 0.0 mm Low 9
23 Sept 5.7 °C 50 % 41 km/h 0.5 mm Moderate 12
24 Sept 7.0 °C 53 % 41 km/h 0.2 mm Low 11
25 Sept 6.4 °C 39 % 35 km/h 0.0 mm Moderate 12
26 Sept 9.3 °C 42 % 32 km/h 0.0 mm Moderate 12
27 Sept 12.3 °C 38 % 41 km/h 0.0 mm Moderate 15
28 Sept 9.4 °C 49 % 37 km/h 0.6 mm Moderate 12
29 Sept after 4.0 °C 56 % 32 km/h 1.3 mm Very low 5

Its twins: fires that started in the same weather

It started with an FWI of 16.4, a minimum humidity of 29% and 16 days without rain. Fires in the area that started in weather like this since 2016: 34.

FWI at the start 16.4
Minimum humidity 29 %
Days without rain 16
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Evenkiysky Rayon fire, August 2017
12,118 ha 20 days FWI 15.2 Min. humidity 30 % 48 km away, in 2017

First rain (1 mm or more) after it ended: 2.3 mm on 23 Aug.

What happened to them

16 days
median duration
5,929 ha
median area
26 %
went past 10,000 ha
3.6 mm
rain at the end (median; 33 of 34 had it)

It stayed below its twins: 3,782 ha against a median of 5,929 ha. It lasted 16 days, against 16 days.

In 1 of 34, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.3 mmfirst rain
29 Septthe day after it ended
41km/h · max. gust

It was considered over on 28 Sept, and on 29 Sept 1.3 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 33 of 34, with a median of 3.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 6 Sept 2016
After · 5 Oct 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 737Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Evenkiysky Rayon fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 13 September 2016 to 28 September 2016 (16 days). The perimeter dates it from 13 September 2016 to 22 September 2016.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,782 hectares (37.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Evenkiysky Rayon (3,218 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 21.7 °C, humidity dropped to 24 % and gusts hit 41 km/h. The fire danger index (FWI) reached 20, class Moderate.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 34. Their median duration was 16 days and their median area 5,929 ha; 26 % went past 10,000 ha. In 1 of 34, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 22 September 2016 → 28 September 2016.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 13 September 2016 to 22 September 2016. 737 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.