Skip to content
worldfires
FR · France · –

Estérençuby fire, 24 February 2026 Estérençuby, Lecumberry

Out · last detection 27 Feb 2026, 12:45 UTC

The fire started on 24 February 2026 in Estérençuby, France, and satellites saw it burning for 4 days. Copernicus mapped a burnt perimeter of 705 hectares from satellite imagery, spread across 2 municipalities.

It is the 3th largest in Pyrénées-Atlantiques since 2016 (of 69 with a page). Number 13 in France in 2026, of 115.

The power measured by the satellite is low (22.5 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
705ha
Copernicus perimeter
Duration
≈ 4days
24 Feb 2026 – 27 Feb 2026
Municipalities hit
2
communes
Started on
24 Feb
2026
Heat detections
30
in a single hotspot: 23 MW
Danger at start
2
Very low · FWI index
Average daily power
54MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 24 Feb27 Feb
27 Feb 2026

How it evolved, day by day

24 Feb 2026 · 67 MW · 6 25 Feb 2026 · 80 MW · 15 26 Feb 2026 · 16 MW · 2 27 Feb 2026 · 53 MW · 7
24 Feb 25 Feb 26 Feb 27 Feb

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

20°high
39km/h · peak gust
28%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started. Rain came after the fire: 5.7 mm on 28 Feb.

This area had burned before

92% of the perimeter overlaps earlier fires recorded since 2016: 104 ha in 2017, 484 ha in 2019, 227 ha in 2020, 216 ha in 2021, 409 ha in 2022, 249 ha in 2023, 355 ha in 2024, 357 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 652 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 0.4% of the area of London (7.0 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Estérençuby 303 inhabitants · 4.2 km from the centre where it started
    382 ha reached on 24 Feb
    8.3 %
  2. Lecumberry 196 inhabitants · 8.3 km from the centre
    315 ha reached on 25 Feb
    5.4 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land90 %
  • Broadleaved forest10 %

Natura 2000 protected area affected: 100 %

Natura 2000 sites (European Environment Agency, 2024 release) crossed by the perimeter.

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
24 Feb 20.0 °C 28 % 33 km/h 0.0 mm Very low 2
25 Feb 20.3 °C 29 % 36 km/h 0.0 mm Very low 5
26 Feb 18.3 °C 39 % 29 km/h 0.0 mm Very low 5
27 Feb 17.8 °C 36 % 39 km/h 1.5 mm Low 6
28 Feb after 7.9 °C 75 % 28 km/h 5.7 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 2.2, a minimum humidity of 28% and 3 days without rain. Fires in the area that started in weather like this since 2016: 24.

FWI at the start 2.2
Minimum humidity 28 %
Days without rain 3
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Estérençuby fire, February 2019
284 ha 6 days FWI 3.6 Min. humidity 27 % 10 km away, in 2019

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

2 days
median duration
164 ha
median area
0 %
went past 1,000 ha
4.2 mm
rain at the end (median; 23 of 24 had it)

It was 4.3 times larger than the median of its twins and lasted 4 days, against 2 days.

Only 1 of its 24 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 1 of 24, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

5.7 mmfirst rain
28 Febthe day after it ended
39km/h · max. gust

It was considered over on 27 Feb, and on 28 Feb 5.7 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 23 of 24, with a median of 4.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 17 Feb 2026
After · 6 Mar 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 27 February 2026 the air beside the fire reached 39 µg/m³ of PM2.5. That day averaged 16: 1.1 times the WHO daily guideline (15).

PM2.5 peak39 µg/m³
Days over the guideline1 day
PM1056 µg/m³
Optical depth0.29
22 Feb24 Feb26 Feb
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 30Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in France

Frequently asked questions

How long did the Estérençuby fire last?
The official perimeter only gives the start date (24 February 2026). The end comes from the heat detections inside the perimeter: it burned until 27 February 2026 (4 days from 24 February 2026), the last day with detections before more than 10 days in a row without any, so it is approximate.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 705 hectares (7.0 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Estérençuby (382 ha, 8.3 %); Lecumberry (315 ha, 5.4 %).
Did the fire reach a town?
The fire started in Estérençuby and came within 4.2 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 20.3 °C, humidity dropped to 28 % and gusts hit 39 km/h. The fire danger index (FWI) reached 6, class Low.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of France (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 24. Their median duration was 2 days and their median area 164 ha; 0 % went past 1,000 ha. Only 1 of its 24 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 1 of 24, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · 18 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 24 February 2026 → 27 February 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112 · 18.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery; 2 polygons grouped in this page.
  • The official perimeter has no end date: the end is the last day with VIIRS detections inside the perimeter before a gap of more than 10 days (150 days at most), so it is approximate. 30 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM5 (Open Data Commons Attribution License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.