Skip to content
worldfires
AU · Australia · –

East Pilbara fire, 18 September 2017 East Pilbara, Derby-West Kimberley

Out · last detection 6 Oct 2017, 05:22 UTC

The fire started on 18 September 2017 in East Pilbara, Australia, and satellites saw it burning for 19 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 190,652 hectares from heat detections, spread across 2 municipalities.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
190,652ha
GWIS perimeter (Copernicus)
Duration
19days
18 Sept 2017 – 6 Oct 2017
Municipalities hit
2
local government areas
Started on
18 Sept
2017
Heat detections
7,459
in a single hotspot: 686 MW
Danger at start
73
Very extreme · FWI index
Average daily power
9.9GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 18 Sept6 Oct
6 Oct 2017

How it evolved, day by day

18 Sept 2017 · 4,475 MW · 222 19 Sept 2017 · 4,398 MW · 361 20 Sept 2017 · 1,140 MW · 131 21 Sept 2017 · 4,731 MW · 395 22 Sept 2017 · 23,239 MW · 1160 23 Sept 2017 · 110,858 MW · 2433 24 Sept 2017 · 12,385 MW · 795 25 Sept 2017 · 1,731 MW · 203 26 Sept 2017 · 1,111 MW · 127 27 Sept 2017 · 3,328 MW · 227 28 Sept 2017 · 4,993 MW · 191 29 Sept 2017 · 2,159 MW · 68 30 Sept 2017 · 3,193 MW · 466 1 Oct 2017 · 1,832 MW · 284 2 Oct 2017 · 4,047 MW · 145 3 Oct 2017 · 3,265 MW · 175 4 Oct 2017 · 1,527 MW · 72 5 Oct 2017 · 4 MW · 3 6 Oct 2017 · 6 MW · 1
18 Sept 23 Sept 26 Sept 30 Sept 4 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
50km/h · peak gust
6%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 1.0 mm on 12 Oct.

This area had burned before

0% of the perimeter overlaps earlier fires recorded since 2016: 388 ha in 2016.

How big is it?

20 km
It burned the equivalent of 1.2 times the area of London (1,907 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Pilbara where it started
    168,312 ha
    0.4 %
  2. 21,402 ha
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia Very dry air: 28 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
18 Sept 36.6 °C 6 % 33 km/h 0.0 mm Very extreme 73
19 Sept 36.8 °C 7 % 25 km/h 0.0 mm Very extreme 75
20 Sept 36.9 °C 6 % 35 km/h 0.0 mm Very extreme 89
21 Sept 37.3 °C 9 % 26 km/h 0.0 mm Very extreme 73
22 Sept 38.1 °C 11 % 31 km/h 0.0 mm Extreme 68
23 Sept 36.4 °C 12 % 45 km/h 0.0 mm Very extreme 96
24 Sept 34.7 °C 13 % 50 km/h 0.0 mm Very extreme 98
25 Sept 33.4 °C 25 % 41 km/h 0.0 mm Extreme 70
26 Sept 34.2 °C 29 % 39 km/h 0.0 mm Extreme 62
27 Sept 34.8 °C 28 % 36 km/h 0.0 mm Extreme 53
28 Sept 36.2 °C 26 % 34 km/h 0.0 mm Very high 46
29 Sept 36.1 °C 22 % 46 km/h 0.0 mm Extreme 68
30 Sept 34.1 °C 16 % 46 km/h 0.0 mm Very extreme 73
1 Oct 34.5 °C 20 % 43 km/h 0.0 mm Extreme 62
2 Oct 38.1 °C 19 % 39 km/h 0.0 mm Extreme 58
3 Oct 38.3 °C 19 % 48 km/h 0.0 mm Extreme 70
4 Oct 37.6 °C 21 % 30 km/h 0.0 mm Extreme 52
5 Oct 37.8 °C 21 % 44 km/h 0.0 mm Very high 49
6 Oct 36.8 °C 26 % 44 km/h 0.0 mm Very high 43
7 Oct after 36.0 °C 25 % 45 km/h 0.0 mm Extreme 66
8 Oct after 36.5 °C 25 % 29 km/h 0.0 mm Extreme 51
9 Oct after 36.9 °C 29 % 31 km/h 0.3 mm Extreme 51
10 Oct after 35.3 °C 33 % 26 km/h 0.2 mm High 36
11 Oct after 37.1 °C 25 % 35 km/h 0.1 mm Very high 48
12 Oct after 39.2 °C 24 % 48 km/h 1.0 mm Extreme 56

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 11 Sept 2017
After · 13 Oct 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 7,459Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Pilbara fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 18 September 2017 to 6 October 2017 (19 days). The perimeter dates it from 18 September 2017 to 4 October 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 190,652 hectares (1,906.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: East Pilbara (168,312 ha, 0.4 %); Derby-West Kimberley (21,402 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 38.3 °C, humidity dropped to 6 % and gusts hit 50 km/h. The fire danger index (FWI) reached 98, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 4 October 2017 → 6 October 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 7 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 18 September 2017 to 4 October 2017. 7,459 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.