Skip to content
worldfires
AU · Australia · –

East Arnhem fire, 15 October 2026 East Arnhem

Out · last detection 11 Nov 2026, 16:00 UTC

The fire started on 15 October 2026 in East Arnhem, Australia, and satellites saw it burning for 28 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 9,242 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
9,242ha
GWIS perimeter (Copernicus)
Duration
28days
15 Oct 2026 – 11 Nov 2026
Municipalities hit
1
local government areas
Started on
15 Oct
2026
Heat detections
299
in a single hotspot: 68 MW
Danger at start
25
High · FWI index
Average daily power
98MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 15 Oct11 Nov
11 Nov 2026

How it evolved, day by day

15 Oct 2026 · 0 MW · 0 16 Oct 2026 · 3 MW · 1 17 Oct 2026 · 11 MW · 2 18 Oct 2026 · 16 MW · 5 19 Oct 2026 · 31 MW · 5 20 Oct 2026 · 7 MW · 2 21 Oct 2026 · 0 MW · 0 22 Oct 2026 · 1 MW · 1 23 Oct 2026 · 121 MW · 8 24 Oct 2026 · 105 MW · 8 25 Oct 2026 · 274 MW · 18 26 Oct 2026 · 137 MW · 22 27 Oct 2026 · 170 MW · 30 28 Oct 2026 · 359 MW · 40 29 Oct 2026 · 314 MW · 42 30 Oct 2026 · 0 MW · 0 31 Oct 2026 · 11 MW · 3 1 Nov 2026 · 76 MW · 20 2 Nov 2026 · 118 MW · 22 3 Nov 2026 · 91 MW · 20 4 Nov 2026 · 151 MW · 20 5 Nov 2026 · 0 MW · 0 6 Nov 2026 · 1 MW · 1 7 Nov 2026 · 7 MW · 3 8 Nov 2026 · 109 MW · 10 9 Nov 2026 · 146 MW · 15 10 Nov 2026 · 0 MW · 0 11 Nov 2026 · 2 MW · 1
15 Oct 21 Oct 28 Oct 2 Nov 8 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (102 passes) and with what wind. Watch the film

The weather it burned in

35°high
44km/h · peak gust
41%lowest humidity

It had gone 10 days without rain (1 mm or more) when it started. Rain came after the fire: 1.2 mm on 12 Nov.

This area had burned before

56% of the perimeter overlaps earlier fires recorded since 2016: 345 ha in 2016, 1,202 ha in 2017, 3,180 ha in 2018, 4,739 ha in 2019, 1,328 ha in 2020, 1,815 ha in 2021, 1,944 ha in 2022, 1,543 ha in 2023, 3,453 ha in 2024, 1,143 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 5,219 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 5.8% of the area of London (92 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Arnhem where it started
    9,229 ha reached on 15 Oct
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives

Day High Min. humidity Peak gust Rain Danger (FWI)
15 Oct 31.1 °C 53 % 41 km/h 0.2 mm High 25
16 Oct 30.1 °C 61 % 42 km/h 0.3 mm High 22
17 Oct 30.3 °C 61 % 41 km/h 0.2 mm High 24
18 Oct 30.4 °C 60 % 41 km/h 0.1 mm High 23
19 Oct 30.0 °C 65 % 41 km/h 0.3 mm High 24
20 Oct 29.9 °C 64 % 44 km/h 0.2 mm High 25
21 Oct 30.4 °C 65 % 41 km/h 0.4 mm High 22
22 Oct 30.5 °C 58 % 38 km/h 0.3 mm High 23
23 Oct 31.3 °C 56 % 38 km/h 0.1 mm High 26
24 Oct 32.6 °C 50 % 38 km/h 0.0 mm High 28
25 Oct 32.1 °C 50 % 38 km/h 0.0 mm High 29
26 Oct 32.6 °C 49 % 39 km/h 0.1 mm High 31
27 Oct 31.8 °C 56 % 37 km/h 1.8 mm Moderate 14
28 Oct 31.7 °C 58 % 41 km/h 2.9 mm Moderate 20
29 Oct 31.4 °C 60 % 36 km/h 0.2 mm Moderate 18
30 Oct 30.8 °C 62 % 38 km/h 0.5 mm High 23
31 Oct 31.7 °C 57 % 38 km/h 0.0 mm High 28
1 Nov 32.7 °C 52 % 38 km/h 0.0 mm High 32
2 Nov 33.3 °C 50 % 38 km/h 0.3 mm High 32
3 Nov 33.8 °C 49 % 36 km/h 0.0 mm High 32
4 Nov 33.7 °C 50 % 40 km/h 0.0 mm High 33
5 Nov 33.5 °C 55 % 37 km/h 0.6 mm High 32
6 Nov 33.1 °C 52 % 38 km/h 0.1 mm High 34
7 Nov 33.0 °C 53 % 40 km/h 0.1 mm High 34
8 Nov 32.8 °C 54 % 40 km/h 0.0 mm High 33
9 Nov 34.9 °C 41 % 37 km/h 0.0 mm Very high 40
10 Nov 33.2 °C 56 % 35 km/h 1.0 mm High 22
11 Nov 32.5 °C 59 % 40 km/h 0.3 mm High 30
12 Nov after 32.2 °C 58 % 44 km/h 1.2 mm High 27

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 8 Oct 2026
After · 18 Nov 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 18 October 2026 the air beside the fire reached 41 µg/m³ of PM2.5. That day averaged 20: 1.3 times the WHO daily guideline (15).

PM2.5 peak41 µg/m³
Days over the guideline5 days
PM1046 µg/m³
Optical depth0.38
13 Oct17 Oct21 Oct25 Oct29 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 299Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Arnhem fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 15 October 2026 to 11 November 2026 (28 days). The perimeter dates it from 22 October 2026 to 11 November 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 9,242 hectares (92.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Arnhem (9,229 ha, 0.3 %).
Is the East Arnhem fire still active?
No fire detections since 11 Nov 2026, 16:00 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 34.9 °C, humidity dropped to 41 % and gusts hit 44 km/h. The fire danger index (FWI) reached 40, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 10 Changes in area, dates, name, official record or merged pages, compared every night since 30 October 2026.
  1. Last day with fire: 30 October 2026 → 11 November 2026.
  2. Area: 8,970 → 9,201 ha.
  3. Area: 8,396 → 8,970 ha.
  4. Area: 8,129 → 8,396 ha.
  5. Area: 7,809 → 8,129 ha.
  6. Area: 6,751 → 7,809 ha.
  7. Area: 6,191 → 6,751 ha.
  8. Area: 5,865 → 6,191 ha.
  9. Area: 5,292 → 5,865 ha.
  10. Page published (5,292 ha).

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 22 October 2026 to 11 November 2026. 299 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.