Skip to content
worldfires
AU · Australia · –

East Arnhem fire, 1 October 2021 East Arnhem

Out · last detection 27 Oct 2021, 03:56 UTC

The fire started on 1 October 2021 in East Arnhem, Australia, and satellites saw it burning for 27 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 16,848 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
16,848ha
GWIS perimeter (Copernicus)
Duration
27days
1 Oct 2021 – 27 Oct 2021
Municipalities hit
1
local government areas
Started on
1 Oct
2021
Heat detections
758
in a single hotspot: 0 MW
Danger at start
13
Moderate · FWI index
Average daily power
296MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 1 Oct27 Oct
27 Oct 2021

How it evolved, day by day

1 Oct 2021 · 35 MW · 3 4 Oct 2021 · 131 MW · 21 5 Oct 2021 · 305 MW · 42 6 Oct 2021 · 214 MW · 27 7 Oct 2021 · 116 MW · 16 8 Oct 2021 · 118 MW · 20 9 Oct 2021 · 41 MW · 9 10 Oct 2021 · 150 MW · 20 11 Oct 2021 · 133 MW · 15 12 Oct 2021 · 16 MW · 3 13 Oct 2021 · 77 MW · 12 14 Oct 2021 · 641 MW · 64 15 Oct 2021 · 589 MW · 54 16 Oct 2021 · 446 MW · 52 17 Oct 2021 · 227 MW · 37 18 Oct 2021 · 241 MW · 63 19 Oct 2021 · 1,591 MW · 81 20 Oct 2021 · 523 MW · 48 21 Oct 2021 · 1,096 MW · 65 22 Oct 2021 · 327 MW · 40 23 Oct 2021 · 5 MW · 5 24 Oct 2021 · 92 MW · 18 25 Oct 2021 · 93 MW · 15 26 Oct 2021 · 117 MW · 18 27 Oct 2021 · 72 MW · 10
1 Oct 8 Oct 13 Oct 19 Oct 23 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
36km/h · peak gust
48%lowest humidity

It had gone 5 days without rain (1 mm or more) when it started. Rain came after the fire: 2.2 mm on 31 Oct.

This area had burned before

99% of the perimeter overlaps earlier fires recorded since 2016: 6,067 ha in 2016, 7,860 ha in 2017, 7,027 ha in 2018, 13,987 ha in 2019, 368 ha in 2020. Part of it burned more than once, so the yearly figures add up to more than the 16,672 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 11% of the area of London (168 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Arnhem where it started
    16,937 ha
    0.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
1 Oct 29.5 °C 63 % 32 km/h 0.0 mm Moderate 13
2 Oct 30.1 °C 59 % 28 km/h 0.0 mm Moderate 14
3 Oct 32.0 °C 48 % 35 km/h 0.0 mm Moderate 19
4 Oct 31.5 °C 52 % 33 km/h 0.0 mm Moderate 19
5 Oct 31.5 °C 51 % 32 km/h 0.0 mm Moderate 18
6 Oct 30.6 °C 58 % 31 km/h 0.0 mm Moderate 18
7 Oct 30.6 °C 53 % 36 km/h 0.0 mm Moderate 19
8 Oct 30.4 °C 57 % 35 km/h 0.0 mm Moderate 20
9 Oct 29.6 °C 65 % 35 km/h 0.0 mm Moderate 17
10 Oct 30.0 °C 68 % 35 km/h 0.1 mm Moderate 17
11 Oct 29.9 °C 61 % 35 km/h 0.0 mm Moderate 18
12 Oct 30.0 °C 62 % 36 km/h 1.3 mm Low 10
13 Oct 31.6 °C 55 % 34 km/h 0.1 mm Moderate 17
14 Oct 31.7 °C 56 % 32 km/h 0.0 mm Moderate 18
15 Oct 31.4 °C 53 % 35 km/h 0.0 mm Moderate 19
16 Oct 32.1 °C 50 % 36 km/h 0.6 mm Moderate 21
17 Oct 31.2 °C 61 % 34 km/h 0.0 mm Moderate 19
18 Oct 30.9 °C 61 % 34 km/h 0.0 mm Moderate 20
19 Oct 32.0 °C 57 % 36 km/h 0.0 mm High 22
20 Oct 32.6 °C 48 % 32 km/h 0.0 mm High 23
21 Oct 33.1 °C 50 % 36 km/h 0.0 mm High 25
22 Oct 32.7 °C 51 % 32 km/h 0.2 mm High 23
23 Oct 31.1 °C 60 % 35 km/h 0.9 mm Moderate 17
24 Oct 30.8 °C 59 % 33 km/h 0.0 mm Moderate 18
25 Oct 29.8 °C 66 % 30 km/h 1.6 mm Low 8
26 Oct 30.6 °C 64 % 31 km/h 0.8 mm Moderate 12
27 Oct 30.6 °C 65 % 35 km/h 1.5 mm Low 10
28 Oct after 30.8 °C 63 % 33 km/h 0.0 mm Moderate 16
29 Oct after 31.1 °C 60 % 34 km/h 0.0 mm Moderate 18
30 Oct after 31.3 °C 61 % 38 km/h 0.0 mm Moderate 19
31 Oct after 30.9 °C 65 % 35 km/h 2.2 mm Low 8

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 24 Sept 2021
After · 3 Nov 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 0Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Arnhem fire last?
GWIS (Copernicus) dates it between 1 October 2021 and 27 October 2021: 27 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 16,848 hectares (168.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Arnhem (16,937 ha, 0.5 %).
What was the weather like?
During the fire the temperature reached 33.1 °C, humidity dropped to 48 % and gusts hit 36 km/h. The fire danger index (FWI) reached 25, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 4 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 31 October 2021 → 27 October 2021.
  2. Start date: 25 September 2021 → 1 October 2021.
  3. Last day with fire: 27 October 2021 → 31 October 2021.
  4. Start date: 1 October 2021 → 25 September 2021.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.