Skip to content
worldfires
AU · Australia · –

East Arnhem fire, 20 July 2026 East Arnhem

Out · last detection 31 Jul 2026, 04:19 UTC

The fire started on 20 July 2026 in East Arnhem, Australia, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 16,214 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
16,214ha
GWIS perimeter (Copernicus)
Duration
12days
20 Jul 2026 – 31 Jul 2026
Municipalities hit
1
local government areas
Started on
20 Jul
2026
Heat detections
444
in a single hotspot: 42 MW
Danger at start
34
High · FWI index
Average daily power
459MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 20 Jul31 Jul
31 Jul 2026

How it evolved, day by day

20 Jul 2026 · 1,049 MW · 110 21 Jul 2026 · 171 MW · 37 25 Jul 2026 · 43 MW · 9 27 Jul 2026 · 30 MW · 5 28 Jul 2026 · 1,712 MW · 244 29 Jul 2026 · 180 MW · 34 31 Jul 2026 · 31 MW · 5
20 Jul 25 Jul 28 Jul 31 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (9 passes) and with what wind. Watch the film

The weather it burned in

28°high
55km/h · peak gust
35%lowest humidity

It had gone 11 days without rain (1 mm or more) when it started.

This area had burned before

93% of the perimeter overlaps earlier fires recorded since 2016: 1,618 ha in 2016, 1,627 ha in 2017, 5,572 ha in 2018, 4,041 ha in 2019, 3,995 ha in 2020, 3,717 ha in 2021, 1,850 ha in 2022, 4,419 ha in 2023, 6,251 ha in 2024, 1,174 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 15,069 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 10% of the area of London (162 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Arnhem where it started
    16,814 ha
    0.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
20 Jul 27.8 °C 40 % 39 km/h 0.0 mm High 34
21 Jul 27.9 °C 35 % 34 km/h 0.0 mm High 32
22 Jul 27.9 °C 44 % 35 km/h 0.0 mm High 35
23 Jul 27.8 °C 56 % 42 km/h 1.7 mm High 34
24 Jul 27.0 °C 48 % 55 km/h 0.9 mm Moderate 21
25 Jul 26.3 °C 44 % 51 km/h 0.0 mm High 36
26 Jul 26.7 °C 48 % 50 km/h 0.1 mm High 36
27 Jul 25.8 °C 47 % 43 km/h 0.0 mm High 32
28 Jul 27.1 °C 36 % 38 km/h 0.0 mm High 34
29 Jul 27.1 °C 55 % 40 km/h 0.1 mm High 32
30 Jul 26.9 °C 63 % 45 km/h 0.8 mm High 30
31 Jul 27.3 °C 59 % 48 km/h 0.7 mm High 27
1 Aug after 29.0 °C 40 % 53 km/h 0.0 mm Very high 44
2 Aug after 28.4 °C 44 % 44 km/h 0.0 mm Very high 38
3 Aug after 28.1 °C 60 % 41 km/h 0.5 mm High 29
4 Aug after 27.8 °C 54 % 47 km/h 0.0 mm High 31
5 Aug after 29.0 °C 41 % 48 km/h 0.0 mm Very high 40
6 Aug after 28.8 °C 41 % 41 km/h 0.0 mm Very high 39
7 Aug after 29.2 °C 41 % 41 km/h 0.0 mm High 37
8 Aug after 29.6 °C 41 % 37 km/h 0.0 mm High 36
9 Aug after 32.1 °C 36 % 26 km/h 0.0 mm High 27
10 Aug after 33.4 °C 35 % 35 km/h 0.0 mm High 26

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 13 Jul 2026
After · 7 Aug 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 28 July 2026 the air beside the fire reached 63 µg/m³ of PM2.5. That day averaged 37: 2.5 times the WHO daily guideline (15).

PM2.5 peak63 µg/m³
Days over the guideline8 days
PM1065 µg/m³
Optical depth0.45
18 Jul23 Jul28 Jul2 Aug7 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 444Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Arnhem fire last?
GWIS (Copernicus) dates it between 20 July 2026 and 31 July 2026: 12 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 16,214 hectares (162.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Arnhem (16,814 ha, 0.5 %).
What was the weather like?
During the fire the temperature reached 27.9 °C, humidity dropped to 35 % and gusts hit 55 km/h. The fire danger index (FWI) reached 36, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 16,681 → 16,214 ha.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 444 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.