Skip to content
worldfires
AU · Australia · –

East Arnhem fire, 2 October 2019 East Arnhem

Out · last detection 26 Oct 2019, 04:20 UTC

The fire started on 2 October 2019 in East Arnhem, Australia, and satellites saw it burning for 25 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 38,796 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
38,796ha
GWIS perimeter (Copernicus)
Duration
25days
2 Oct 2019 – 26 Oct 2019
Municipalities hit
1
local government areas
Started on
2 Oct
2019
Heat detections
1,425
in a single hotspot: 189 MW
Danger at start
55
Extreme · FWI index
Average daily power
844MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 2 Oct26 Oct
26 Oct 2019

How it evolved, day by day

4 Oct 2019 · 40 MW · 11 5 Oct 2019 · 322 MW · 26 6 Oct 2019 · 4 MW · 2 7 Oct 2019 · 68 MW · 10 8 Oct 2019 · 126 MW · 10 9 Oct 2019 · 518 MW · 37 10 Oct 2019 · 2,069 MW · 97 11 Oct 2019 · 710 MW · 69 12 Oct 2019 · 2,954 MW · 170 13 Oct 2019 · 2,103 MW · 250 14 Oct 2019 · 1,456 MW · 113 15 Oct 2019 · 628 MW · 62 16 Oct 2019 · 513 MW · 38 17 Oct 2019 · 285 MW · 38 18 Oct 2019 · 369 MW · 39 19 Oct 2019 · 869 MW · 95 20 Oct 2019 · 1,450 MW · 74 21 Oct 2019 · 3,379 MW · 107 22 Oct 2019 · 413 MW · 38 23 Oct 2019 · 270 MW · 47 24 Oct 2019 · 288 MW · 34 25 Oct 2019 · 366 MW · 39 26 Oct 2019 · 200 MW · 19
4 Oct 9 Oct 14 Oct 21 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
52km/h · peak gust
11%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 4.4 mm on 27 Oct.

This area had burned before

52% of the perimeter overlaps earlier fires recorded since 2016: 2,864 ha in 2016, 11,416 ha in 2017, 11,327 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 20,078 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 25% of the area of London (388 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Arnhem where it started
    39,233 ha
    1.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
2 Oct 34.2 °C 28 % 44 km/h 0.0 mm Extreme 55
3 Oct 32.3 °C 35 % 49 km/h 0.0 mm Extreme 59
4 Oct 32.8 °C 32 % 46 km/h 0.0 mm Extreme 55
5 Oct 31.6 °C 39 % 44 km/h 0.0 mm Very high 48
6 Oct 33.2 °C 33 % 41 km/h 0.0 mm Very high 38
7 Oct 33.8 °C 30 % 40 km/h 0.0 mm Very high 42
8 Oct 33.9 °C 35 % 44 km/h 0.0 mm Very high 50
9 Oct 34.1 °C 30 % 47 km/h 0.0 mm Extreme 53
10 Oct 34.9 °C 17 % 43 km/h 0.0 mm Extreme 58
11 Oct 34.3 °C 18 % 45 km/h 0.0 mm Extreme 63
12 Oct 35.8 °C 11 % 45 km/h 0.0 mm Very extreme 72
13 Oct 36.1 °C 16 % 36 km/h 0.0 mm Extreme 65
14 Oct 36.6 °C 22 % 37 km/h 0.0 mm Extreme 62
15 Oct 36.5 °C 22 % 35 km/h 0.0 mm Extreme 52
16 Oct 36.7 °C 20 % 33 km/h 0.0 mm Extreme 54
17 Oct 36.6 °C 25 % 36 km/h 0.0 mm Extreme 55
18 Oct 36.7 °C 28 % 49 km/h 0.0 mm Extreme 60
19 Oct 36.5 °C 29 % 46 km/h 0.0 mm Extreme 60
20 Oct 36.5 °C 20 % 52 km/h 0.0 mm Extreme 64
21 Oct 35.4 °C 19 % 52 km/h 0.0 mm Very extreme 76
22 Oct 33.4 °C 34 % 45 km/h 0.0 mm Extreme 52
23 Oct 33.3 °C 34 % 48 km/h 0.0 mm Extreme 55
24 Oct 33.1 °C 39 % 38 km/h 1.1 mm Very high 41
25 Oct 35.6 °C 29 % 36 km/h 0.2 mm Very high 39
26 Oct 33.3 °C 39 % 34 km/h 0.9 mm Very high 40
27 Oct after 32.8 °C 47 % 35 km/h 4.4 mm Low 10

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 25 Sept 2019
After · 2 Nov 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 1,425Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Arnhem fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 2 October 2019 to 26 October 2019 (25 days). The perimeter dates it from 7 October 2019 to 26 October 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 38,796 hectares (388.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Arnhem (39,233 ha, 1.2 %).
What was the weather like?
During the fire the temperature reached 36.7 °C, humidity dropped to 11 % and gusts hit 52 km/h. The fire danger index (FWI) reached 76, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 7 October 2019 → 2 October 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 7 October 2019 to 26 October 2019. 1,425 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.