Skip to content
worldfires
AU · Australia · –

East Arnhem fire, 11 October 2023 East Arnhem

Out · last detection 11 Nov 2023, 04:27 UTC

The fire started on 11 October 2023 in East Arnhem, Australia, and satellites saw it burning for 32 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 14,868 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
14,868ha
GWIS perimeter (Copernicus)
Duration
32days
11 Oct 2023 – 11 Nov 2023
Municipalities hit
1
local government areas
Started on
11 Oct
2023
Heat detections
784
in a single hotspot: 214 MW
Danger at start
40
Very high · FWI index
Average daily power
280MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 11 Oct11 Nov
11 Nov 2023

How it evolved, day by day

11 Oct 2023 · 102 MW · 9 12 Oct 2023 · 2 MW · 2 13 Oct 2023 · 152 MW · 24 14 Oct 2023 · 115 MW · 15 15 Oct 2023 · 145 MW · 13 16 Oct 2023 · 132 MW · 18 17 Oct 2023 · 642 MW · 25 18 Oct 2023 · 219 MW · 21 19 Oct 2023 · 33 MW · 6 20 Oct 2023 · 192 MW · 16 22 Oct 2023 · 10 MW · 2 23 Oct 2023 · 7 MW · 2 24 Oct 2023 · 9 MW · 2 25 Oct 2023 · 47 MW · 5 26 Oct 2023 · 962 MW · 20 27 Oct 2023 · 650 MW · 30 28 Oct 2023 · 121 MW · 27 29 Oct 2023 · 626 MW · 35 30 Oct 2023 · 305 MW · 52 31 Oct 2023 · 309 MW · 41 1 Nov 2023 · 217 MW · 36 2 Nov 2023 · 745 MW · 50 3 Nov 2023 · 652 MW · 53 4 Nov 2023 · 219 MW · 41 5 Nov 2023 · 187 MW · 28 6 Nov 2023 · 333 MW · 38 7 Nov 2023 · 355 MW · 47 8 Nov 2023 · 390 MW · 40 9 Nov 2023 · 396 MW · 49 10 Nov 2023 · 348 MW · 30 11 Nov 2023 · 45 MW · 7
11 Oct 18 Oct 26 Oct 2 Nov 9 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
42km/h · peak gust
27%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 3.8 mm on 12 Nov.

This area had burned before

97% of the perimeter overlaps earlier fires recorded since 2016: 2,893 ha in 2016, 1,926 ha in 2017, 11,515 ha in 2018, 4,536 ha in 2019, 4,500 ha in 2020, 2,047 ha in 2021, 2,906 ha in 2022. Part of it burned more than once, so the yearly figures add up to more than the 14,421 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 9.4% of the area of London (149 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Arnhem where it started
    14,954 ha
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
11 Oct 32.4 °C 40 % 38 km/h 0.0 mm Very high 40
12 Oct 33.4 °C 39 % 31 km/h 0.0 mm Very high 40
13 Oct 33.0 °C 42 % 40 km/h 0.1 mm Very high 41
14 Oct 33.8 °C 34 % 30 km/h 0.0 mm Very high 40
15 Oct 34.6 °C 27 % 35 km/h 0.0 mm Very high 48
16 Oct 33.2 °C 34 % 28 km/h 0.0 mm Very high 44
17 Oct 34.1 °C 31 % 36 km/h 0.0 mm Very high 46
18 Oct 33.3 °C 36 % 27 km/h 0.0 mm Very high 45
19 Oct 33.0 °C 39 % 35 km/h 0.0 mm Very high 46
20 Oct 32.6 °C 45 % 31 km/h 0.0 mm Very high 40
21 Oct 32.5 °C 46 % 34 km/h 0.0 mm Very high 38
22 Oct 32.0 °C 54 % 37 km/h 0.6 mm High 32
23 Oct 33.2 °C 45 % 31 km/h 0.3 mm High 28
24 Oct 33.1 °C 47 % 37 km/h 0.0 mm High 30
25 Oct 34.7 °C 37 % 37 km/h 0.0 mm High 34
26 Oct 33.8 °C 37 % 35 km/h 0.0 mm Very high 39
27 Oct 33.1 °C 38 % 42 km/h 0.0 mm Extreme 52
28 Oct 34.1 °C 40 % 32 km/h 0.3 mm Very high 39
29 Oct 33.1 °C 51 % 36 km/h 0.0 mm Very high 38
30 Oct 33.8 °C 44 % 32 km/h 0.0 mm Very high 40
31 Oct 35.0 °C 37 % 32 km/h 0.0 mm High 36
1 Nov 35.2 °C 34 % 36 km/h 0.0 mm High 32
2 Nov 34.5 °C 38 % 31 km/h 0.0 mm High 38
3 Nov 33.8 °C 44 % 33 km/h 0.0 mm Very high 39
4 Nov 33.6 °C 48 % 33 km/h 0.4 mm High 37
5 Nov 33.5 °C 45 % 31 km/h 0.3 mm High 36
6 Nov 32.9 °C 50 % 31 km/h 1.1 mm High 34
7 Nov 32.8 °C 50 % 38 km/h 0.0 mm High 27
8 Nov 32.1 °C 53 % 39 km/h 0.5 mm High 29
9 Nov 32.1 °C 53 % 35 km/h 0.3 mm High 35
10 Nov 30.2 °C 60 % 38 km/h 0.8 mm High 33
11 Nov 31.5 °C 54 % 31 km/h 0.9 mm High 26
12 Nov after 30.3 °C 59 % 29 km/h 3.8 mm High 25

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 4 Oct 2023
After · 18 Nov 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 20 October 2023 the air beside the fire reached 102 µg/m³ of PM2.5. That day averaged 37: 2.5 times the WHO daily guideline (15).

PM2.5 peak102 µg/m³
Days over the guideline16 days
PM10145 µg/m³
Optical depth0.91
10 Oct18 Oct26 Oct3 Nov11 Nov
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 784Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Arnhem fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 11 October 2023 to 11 November 2023 (32 days). The perimeter dates it from 12 October 2023 to 11 November 2023.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 14,868 hectares (148.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Arnhem (14,954 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 35.2 °C, humidity dropped to 27 % and gusts hit 42 km/h. The fire danger index (FWI) reached 52, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 12 October 2023 → 11 October 2023.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 12 October 2023 to 11 November 2023. 784 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.