Skip to content
worldfires
AU · Australia · –

East Arnhem fire, 2 September 2023 East Arnhem

Out · last detection 29 Sept 2023, 04:34 UTC

The fire started on 2 September 2023 in East Arnhem, Australia, and satellites saw it burning for 31 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 10,081 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
10,081ha
GWIS perimeter (Copernicus)
Duration
31days
2 Sept 2023 – 2 Oct 2023
Municipalities hit
1
local government areas
Started on
2 Sept
2023
Heat detections
384
in a single hotspot: 47 MW
Danger at start
24
High · FWI index
Average daily power
112MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 2 Sept2 Oct
29 Sept 2023

How it evolved, day by day

2 Sept 2023 · 60 MW · 9 3 Sept 2023 · 73 MW · 11 4 Sept 2023 · 23 MW · 4 5 Sept 2023 · 6 MW · 2 6 Sept 2023 · 3 MW · 3 7 Sept 2023 · 1 MW · 1 8 Sept 2023 · 1 MW · 1 9 Sept 2023 · 20 MW · 2 10 Sept 2023 · 67 MW · 18 11 Sept 2023 · 23 MW · 15 12 Sept 2023 · 5 MW · 6 13 Sept 2023 · 10 MW · 5 14 Sept 2023 · 119 MW · 11 15 Sept 2023 · 54 MW · 6 16 Sept 2023 · 740 MW · 53 17 Sept 2023 · 259 MW · 32 18 Sept 2023 · 357 MW · 44 19 Sept 2023 · 126 MW · 21 20 Sept 2023 · 288 MW · 38 21 Sept 2023 · 195 MW · 19 22 Sept 2023 · 336 MW · 31 23 Sept 2023 · 156 MW · 30 24 Sept 2023 · 38 MW · 13 25 Sept 2023 · 38 MW · 5 26 Sept 2023 · 10 MW · 2 27 Sept 2023 · 7 MW · 1 29 Sept 2023 · 4 MW · 1
2 Sept 8 Sept 16 Sept 26 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

29°high
50km/h · peak gust
53%lowest humidity

It had gone 19 days without rain (1 mm or more) when it started. Rain came after the fire: 1.5 mm on 9 Oct.

This area had burned before

98% of the perimeter overlaps earlier fires recorded since 2016: 1,771 ha in 2016, 3,080 ha in 2017, 7,210 ha in 2018, 2,809 ha in 2019, 6,673 ha in 2020, 3,626 ha in 2021, 144 ha in 2022. Part of it burned more than once, so the yearly figures add up to more than the 9,829 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 6.4% of the area of London (101 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Arnhem where it started
    10,080 ha
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area1.7 ha
Residents< 20

Inside the perimeter there were about 1.7 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
2 Sept 27.0 °C 53 % 33 km/h 0.0 mm High 24
3 Sept 27.2 °C 54 % 33 km/h 0.0 mm High 24
4 Sept 26.7 °C 61 % 35 km/h 0.0 mm High 25
5 Sept 26.7 °C 59 % 36 km/h 0.0 mm High 27
6 Sept 27.3 °C 59 % 38 km/h 0.0 mm High 26
7 Sept 28.1 °C 57 % 33 km/h 0.0 mm High 25
8 Sept 28.0 °C 73 % 47 km/h 1.5 mm High 28
9 Sept 29.2 °C 62 % 45 km/h 0.4 mm Moderate 21
10 Sept 27.8 °C 72 % 45 km/h 0.1 mm High 22
11 Sept 28.2 °C 62 % 44 km/h 1.9 mm Moderate 12
12 Sept 27.2 °C 60 % 47 km/h 0.7 mm High 25
13 Sept 27.3 °C 62 % 49 km/h 0.0 mm High 28
14 Sept 26.8 °C 66 % 48 km/h 0.5 mm High 29
15 Sept 26.7 °C 63 % 50 km/h 0.7 mm High 27
16 Sept 26.7 °C 59 % 50 km/h 0.2 mm High 36
17 Sept 26.4 °C 62 % 44 km/h 0.6 mm High 29
18 Sept 27.1 °C 57 % 43 km/h 0.4 mm High 30
19 Sept 26.5 °C 68 % 37 km/h 0.9 mm High 27
20 Sept 27.2 °C 66 % 33 km/h 0.0 mm High 25
21 Sept 28.1 °C 64 % 30 km/h 0.0 mm High 23
22 Sept 29.0 °C 60 % 39 km/h 0.0 mm High 25
23 Sept 29.3 °C 53 % 41 km/h 0.0 mm High 30
24 Sept 27.3 °C 66 % 44 km/h 0.0 mm High 30
25 Sept 28.0 °C 64 % 41 km/h 0.0 mm High 30
26 Sept 27.8 °C 64 % 38 km/h 0.0 mm High 29
27 Sept 27.9 °C 63 % 38 km/h 0.1 mm High 30
28 Sept 27.6 °C 64 % 45 km/h 0.2 mm High 33
29 Sept 27.5 °C 69 % 48 km/h 1.2 mm High 27
30 Sept 27.3 °C 70 % 42 km/h 0.1 mm High 23
1 Oct 27.4 °C 69 % 42 km/h 0.2 mm High 24
2 Oct 28.0 °C 67 % 35 km/h 0.0 mm High 24
3 Oct after 28.8 °C 65 % 35 km/h 0.0 mm High 25
4 Oct after 29.1 °C 64 % 33 km/h 0.0 mm High 24
5 Oct after 29.6 °C 60 % 37 km/h 0.7 mm High 25
6 Oct after 29.2 °C 54 % 49 km/h 0.0 mm Very high 41
7 Oct after 28.2 °C 67 % 37 km/h 0.5 mm High 27
8 Oct after 29.3 °C 56 % 42 km/h 0.6 mm High 33
9 Oct after 28.9 °C 61 % 42 km/h 1.5 mm Moderate 20

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 26 Aug 2023
After · 9 Oct 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 12 September 2023 the air beside the fire reached 18 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak18 µg/m³
Days over the guideline0 days
PM1030 µg/m³
Optical depth0.43
7 Sept12 Sept17 Sept22 Sept27 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 384Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Arnhem fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 2 September 2023 to 2 October 2023 (31 days). The perimeter dates it from 9 September 2023 to 25 September 2023.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 10,081 hectares (100.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Arnhem (10,080 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 29.3 °C, humidity dropped to 53 % and gusts hit 50 km/h. The fire danger index (FWI) reached 36, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 25 September 2023 → 2 October 2023.
  2. Start date: 9 September 2023 → 2 September 2023.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 9 September 2023 to 25 September 2023. 384 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.