Skip to content
worldfires
AU · Australia · –

East Arnhem fire, 2 October 2019 East Arnhem

Out · last detection 22 Nov 2019, 04:14 UTC

The fire started on 2 October 2019 in East Arnhem, Australia, and satellites saw it burning for 52 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 13,700 hectares from heat detections, spread across a single municipality.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
13,700ha
GWIS perimeter (Copernicus)
Duration
52days
2 Oct 2019 – 22 Nov 2019
Municipalities hit
1
local government areas
Started on
2 Oct
2019
Heat detections
653
in a single hotspot: 43 MW
Danger at start
33
High · FWI index
Average daily power
105MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 2 Oct22 Nov
22 Nov 2019

How it evolved, day by day

2 Oct 2019 · 19 MW · 4 3 Oct 2019 · 75 MW · 15 4 Oct 2019 · 6 MW · 1 5 Oct 2019 · 5 MW · 1 7 Oct 2019 · 4 MW · 1 9 Oct 2019 · 13 MW · 2 10 Oct 2019 · 63 MW · 12 12 Oct 2019 · 94 MW · 9 13 Oct 2019 · 202 MW · 30 14 Oct 2019 · 134 MW · 19 15 Oct 2019 · 322 MW · 31 16 Oct 2019 · 613 MW · 35 17 Oct 2019 · 133 MW · 28 18 Oct 2019 · 257 MW · 31 19 Oct 2019 · 126 MW · 32 20 Oct 2019 · 115 MW · 19 21 Oct 2019 · 387 MW · 28 22 Oct 2019 · 7 MW · 1 23 Oct 2019 · 22 MW · 7 24 Oct 2019 · 90 MW · 16 25 Oct 2019 · 86 MW · 16 27 Oct 2019 · 75 MW · 15 28 Oct 2019 · 34 MW · 6 29 Oct 2019 · 31 MW · 10 30 Oct 2019 · 3 MW · 2 1 Nov 2019 · 104 MW · 17 2 Nov 2019 · 23 MW · 3 3 Nov 2019 · 224 MW · 19 5 Nov 2019 · 114 MW · 15 6 Nov 2019 · 100 MW · 22 7 Nov 2019 · 192 MW · 31 8 Nov 2019 · 1 MW · 1 9 Nov 2019 · 350 MW · 45 10 Nov 2019 · 299 MW · 29 11 Nov 2019 · 137 MW · 18 12 Nov 2019 · 50 MW · 14 13 Nov 2019 · 26 MW · 6 14 Nov 2019 · 5 MW · 3 15 Nov 2019 · 48 MW · 7 16 Nov 2019 · 51 MW · 9 17 Nov 2019 · 27 MW · 6 18 Nov 2019 · 22 MW · 7 19 Nov 2019 · 5 MW · 3 20 Nov 2019 · 88 MW · 15 21 Nov 2019 · 51 MW · 9 22 Nov 2019 · 14 MW · 3
2 Oct 16 Oct 25 Oct 7 Nov 17 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
47km/h · peak gust
33%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 2.9 mm on 25 Nov.

This area had burned before

65% of the perimeter overlaps earlier fires recorded since 2016: 1,765 ha in 2016, 5,844 ha in 2017, 4,392 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 8,840 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 8.7% of the area of London (137 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Arnhem where it started
    14,268 ha
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
2 Oct 29.0 °C 53 % 36 km/h 0.0 mm High 33
3 Oct 28.1 °C 55 % 44 km/h 0.0 mm High 38
4 Oct 28.0 °C 58 % 40 km/h 0.0 mm High 33
5 Oct 27.6 °C 60 % 43 km/h 0.0 mm High 35
6 Oct 28.2 °C 56 % 38 km/h 0.0 mm High 29
7 Oct 28.5 °C 53 % 35 km/h 0.0 mm High 31
8 Oct 28.7 °C 60 % 39 km/h 0.0 mm High 34
9 Oct 29.0 °C 52 % 38 km/h 0.0 mm High 32
10 Oct 29.5 °C 43 % 36 km/h 0.0 mm High 32
11 Oct 29.1 °C 44 % 38 km/h 0.0 mm High 36
12 Oct 30.1 °C 33 % 34 km/h 0.0 mm Very high 42
13 Oct 30.8 °C 33 % 33 km/h 0.0 mm Very high 41
14 Oct 31.0 °C 44 % 35 km/h 0.0 mm Very high 43
15 Oct 30.4 °C 46 % 34 km/h 0.0 mm High 37
16 Oct 30.2 °C 45 % 35 km/h 0.0 mm High 37
17 Oct 30.9 °C 47 % 35 km/h 0.0 mm Very high 40
18 Oct 30.8 °C 54 % 44 km/h 0.0 mm Very high 39
19 Oct 30.2 °C 55 % 36 km/h 0.0 mm High 36
20 Oct 30.2 °C 53 % 36 km/h 0.0 mm High 37
21 Oct 30.5 °C 43 % 40 km/h 0.0 mm Very high 42
22 Oct 28.8 °C 57 % 38 km/h 0.0 mm High 35
23 Oct 28.6 °C 57 % 47 km/h 0.0 mm Very high 39
24 Oct 28.6 °C 63 % 39 km/h 1.5 mm Moderate 18
25 Oct 30.0 °C 55 % 36 km/h 0.2 mm High 28
26 Oct 29.2 °C 62 % 33 km/h 1.1 mm High 23
27 Oct 29.1 °C 69 % 34 km/h 1.5 mm Moderate 13
28 Oct 29.0 °C 64 % 33 km/h 2.0 mm Moderate 13
29 Oct 29.4 °C 53 % 43 km/h 0.1 mm High 27
30 Oct 29.1 °C 62 % 37 km/h 0.8 mm High 24
31 Oct 30.0 °C 55 % 35 km/h 0.0 mm High 27
1 Nov 30.7 °C 52 % 31 km/h 0.0 mm High 31
2 Nov 29.7 °C 64 % 33 km/h 1.0 mm High 30
3 Nov 29.7 °C 60 % 36 km/h 0.2 mm High 34
4 Nov 30.4 °C 58 % 35 km/h 0.0 mm High 27
5 Nov 29.9 °C 63 % 39 km/h 2.4 mm Low 11
6 Nov 29.6 °C 64 % 36 km/h 2.1 mm High 22
7 Nov 30.8 °C 53 % 37 km/h 0.0 mm Moderate 20
8 Nov 32.0 °C 49 % 35 km/h 0.0 mm High 31
9 Nov 31.8 °C 50 % 38 km/h 0.0 mm High 33
10 Nov 31.1 °C 44 % 36 km/h 0.0 mm High 38
11 Nov 30.9 °C 41 % 35 km/h 0.0 mm Very high 40
12 Nov 31.2 °C 49 % 38 km/h 0.0 mm Very high 40
13 Nov 30.9 °C 51 % 35 km/h 0.0 mm High 35
14 Nov 31.0 °C 52 % 34 km/h 0.2 mm High 36
15 Nov 30.9 °C 49 % 33 km/h 0.0 mm High 36
16 Nov 31.4 °C 54 % 34 km/h 0.0 mm High 33
17 Nov 31.0 °C 57 % 34 km/h 0.3 mm High 33
18 Nov 31.8 °C 52 % 35 km/h 0.4 mm High 32
19 Nov 32.3 °C 46 % 39 km/h 0.0 mm Very high 39
20 Nov 32.1 °C 47 % 35 km/h 0.0 mm Very high 38
21 Nov 32.6 °C 47 % 34 km/h 0.0 mm High 33
22 Nov 32.3 °C 49 % 35 km/h 0.2 mm High 34
23 Nov after 30.7 °C 55 % 36 km/h 0.3 mm High 34
24 Nov after 31.2 °C 55 % 32 km/h 0.0 mm High 30
25 Nov after 31.8 °C 54 % 37 km/h 2.9 mm High 31

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 25 Sept 2019
After · 29 Nov 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 653Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Arnhem fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 2 October 2019 to 22 November 2019 (52 days). The perimeter dates it from 9 October 2019 to 22 November 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 13,700 hectares (137.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Arnhem (14,268 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 32.6 °C, humidity dropped to 33 % and gusts hit 47 km/h. The fire danger index (FWI) reached 43, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 14,181 → 13,700 ha.
  2. Start date: 9 October 2019 → 2 October 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 9 October 2019 to 22 November 2019. 653 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.