Skip to content
worldfires
AU · Australia · –

East Arnhem fire, 23 November 2019 East Arnhem

Out · last detection 29 Dec 2019, 04:20 UTC

The fire started on 23 November 2019 in East Arnhem, Australia, and satellites saw it burning for 37 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,301 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
6,301ha
GWIS perimeter (Copernicus)
Duration
37days
23 Nov 2019 – 29 Dec 2019
Municipalities hit
1
local government areas
Started on
23 Nov
2019
Heat detections
272
in a single hotspot: 35 MW
Danger at start
26
High · FWI index
Average daily power
60MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 23 Nov29 Dec
29 Dec 2019

How it evolved, day by day

26 Nov 2019 · 12 MW · 2 27 Nov 2019 · 15 MW · 5 28 Nov 2019 · 80 MW · 10 29 Nov 2019 · 52 MW · 13 30 Nov 2019 · 61 MW · 16 1 Dec 2019 · 4 MW · 1 2 Dec 2019 · 33 MW · 8 3 Dec 2019 · 187 MW · 19 4 Dec 2019 · 149 MW · 20 5 Dec 2019 · 250 MW · 23 6 Dec 2019 · 121 MW · 21 7 Dec 2019 · 7 MW · 4 8 Dec 2019 · 104 MW · 14 9 Dec 2019 · 66 MW · 6 10 Dec 2019 · 20 MW · 3 11 Dec 2019 · 42 MW · 9 14 Dec 2019 · 33 MW · 5 15 Dec 2019 · 19 MW · 4 16 Dec 2019 · 11 MW · 3 17 Dec 2019 · 7 MW · 1 18 Dec 2019 · 103 MW · 13 19 Dec 2019 · 30 MW · 5 20 Dec 2019 · 25 MW · 8 21 Dec 2019 · 11 MW · 4 22 Dec 2019 · 24 MW · 3 23 Dec 2019 · 124 MW · 21 24 Dec 2019 · 148 MW · 18 25 Dec 2019 · 52 MW · 9 26 Dec 2019 · 14 MW · 3 29 Dec 2019 · 11 MW · 1
26 Nov 5 Dec 16 Dec 22 Dec

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
39km/h · peak gust
38%lowest humidity

It had gone 17 days without rain (1 mm or more) when it started. Rain came after the fire: 1.5 mm on 30 Dec.

This area had burned before

68% of the perimeter overlaps earlier fires recorded since 2016: 444 ha in 2016, 2,664 ha in 2017, 2,376 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 4,280 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 4% of the area of London (63 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Arnhem where it started
    6,338 ha
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
23 Nov 30.1 °C 60 % 35 km/h 0.2 mm High 26
24 Nov 31.0 °C 59 % 29 km/h 0.0 mm High 22
25 Nov 31.3 °C 57 % 35 km/h 1.2 mm High 24
26 Nov 31.2 °C 56 % 29 km/h 0.2 mm Moderate 20
27 Nov 31.7 °C 56 % 31 km/h 0.7 mm High 27
28 Nov 31.1 °C 56 % 32 km/h 1.1 mm High 23
29 Nov 31.1 °C 63 % 35 km/h 0.3 mm Moderate 18
30 Nov 30.3 °C 60 % 35 km/h 0.0 mm High 26
1 Dec 31.1 °C 57 % 34 km/h 0.0 mm High 22
2 Dec 31.6 °C 64 % 36 km/h 2.8 mm Moderate 17
3 Dec 31.4 °C 54 % 37 km/h 0.0 mm Moderate 19
4 Dec 32.8 °C 38 % 39 km/h 0.0 mm Very high 41
5 Dec 33.3 °C 39 % 38 km/h 0.0 mm Very high 38
6 Dec 32.4 °C 53 % 35 km/h 0.0 mm High 33
7 Dec 32.0 °C 55 % 33 km/h 0.3 mm High 33
8 Dec 33.1 °C 46 % 33 km/h 0.0 mm High 36
9 Dec 32.1 °C 57 % 36 km/h 0.4 mm High 30
10 Dec 31.3 °C 56 % 34 km/h 0.0 mm High 27
11 Dec 31.5 °C 59 % 27 km/h 0.2 mm High 28
12 Dec 32.7 °C 59 % 35 km/h 0.0 mm High 28
13 Dec 33.3 °C 55 % 29 km/h 0.0 mm High 28
14 Dec 33.2 °C 55 % 31 km/h 0.7 mm High 26
15 Dec 33.9 °C 51 % 34 km/h 0.2 mm High 26
16 Dec 33.0 °C 56 % 30 km/h 2.0 mm High 27
17 Dec 33.0 °C 54 % 28 km/h 1.4 mm Moderate 15
18 Dec 32.7 °C 54 % 36 km/h 0.4 mm Moderate 21
19 Dec 32.0 °C 52 % 38 km/h 2.2 mm High 28
20 Dec 31.9 °C 60 % 38 km/h 2.0 mm High 24
21 Dec 31.1 °C 67 % 38 km/h 2.8 mm Moderate 14
22 Dec 31.4 °C 63 % 32 km/h 1.3 mm Low 10
23 Dec 31.0 °C 67 % 38 km/h 2.3 mm Low 10
24 Dec 31.7 °C 59 % 37 km/h 1.1 mm Moderate 19
25 Dec 32.5 °C 55 % 31 km/h 0.0 mm Moderate 20
26 Dec 33.4 °C 54 % 34 km/h 0.0 mm Moderate 18
27 Dec 32.0 °C 62 % 39 km/h 0.1 mm High 23
28 Dec 32.0 °C 62 % 34 km/h 2.3 mm High 22
29 Dec 31.2 °C 62 % 36 km/h 2.9 mm Low 11
30 Dec after 30.3 °C 69 % 32 km/h 1.5 mm Very low 5

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 16 Nov 2019
After · 5 Jan 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 272Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Arnhem fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 23 November 2019 to 29 December 2019 (37 days). The perimeter dates it from 26 November 2019 to 26 December 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,301 hectares (63.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Arnhem (6,338 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 33.9 °C, humidity dropped to 38 % and gusts hit 39 km/h. The fire danger index (FWI) reached 41, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 26 December 2019 → 29 December 2019.
  2. Start date: 26 November 2019 → 23 November 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 26 November 2019 to 26 December 2019. 272 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.