Skip to content
worldfires
AU · Australia · –

East Arnhem fire, 23 August 2019 East Arnhem

Out · last detection 11 Sept 2019, 05:05 UTC

The fire started on 23 August 2019 in East Arnhem, Australia, and satellites saw it burning for 20 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 7,294 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
7,294ha
GWIS perimeter (Copernicus)
Duration
20days
23 Aug 2019 – 11 Sept 2019
Municipalities hit
1
local government areas
Started on
23 Aug
2019
Heat detections
365
in a single hotspot: 70 MW
Danger at start
57
Extreme · FWI index
Average daily power
153MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 23 Aug11 Sept
11 Sept 2019

How it evolved, day by day

23 Aug 2019 · 566 MW · 24 24 Aug 2019 · 333 MW · 28 25 Aug 2019 · 351 MW · 23 26 Aug 2019 · 92 MW · 24 27 Aug 2019 · 96 MW · 18 28 Aug 2019 · 420 MW · 44 29 Aug 2019 · 291 MW · 38 30 Aug 2019 · 80 MW · 20 31 Aug 2019 · 228 MW · 34 1 Sept 2019 · 191 MW · 30 2 Sept 2019 · 172 MW · 28 3 Sept 2019 · 62 MW · 13 4 Sept 2019 · 10 MW · 4 5 Sept 2019 · 6 MW · 6 6 Sept 2019 · 47 MW · 6 7 Sept 2019 · 14 MW · 3 8 Sept 2019 · 23 MW · 5 9 Sept 2019 · 47 MW · 8 10 Sept 2019 · 27 MW · 5 11 Sept 2019 · 12 MW · 4
23 Aug 27 Aug 31 Aug 4 Sept 8 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
57km/h · peak gust
18%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

59% of the perimeter overlaps earlier fires recorded since 2016: 1,579 ha in 2016, 3,034 ha in 2017, 1,241 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 4,269 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 4.6% of the area of London (73 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Arnhem where it started
    7,295 ha reached on 23 Aug
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
23 Aug 31.2 °C 21 % 41 km/h 0.0 mm Extreme 57
24 Aug 30.0 °C 37 % 39 km/h 0.0 mm Very high 43
25 Aug 30.6 °C 34 % 38 km/h 0.0 mm Very high 44
26 Aug 30.4 °C 33 % 44 km/h 0.0 mm Very high 47
27 Aug 31.3 °C 27 % 50 km/h 0.0 mm Extreme 58
28 Aug 31.2 °C 19 % 57 km/h 0.0 mm Very extreme 83
29 Aug 30.0 °C 22 % 55 km/h 0.0 mm Very extreme 77
30 Aug 31.4 °C 21 % 47 km/h 0.0 mm Extreme 62
31 Aug 32.4 °C 18 % 40 km/h 0.0 mm Extreme 55
1 Sept 31.8 °C 26 % 40 km/h 0.0 mm Extreme 60
2 Sept 31.1 °C 34 % 44 km/h 0.0 mm Extreme 56
3 Sept 30.9 °C 32 % 43 km/h 0.0 mm Extreme 56
4 Sept 31.4 °C 31 % 44 km/h 0.0 mm Extreme 54
5 Sept 30.4 °C 39 % 39 km/h 0.0 mm Very high 44
6 Sept 31.1 °C 36 % 38 km/h 0.0 mm Very high 44
7 Sept 30.8 °C 37 % 39 km/h 0.0 mm Very high 47
8 Sept 33.4 °C 22 % 47 km/h 0.0 mm Extreme 65
9 Sept 31.9 °C 19 % 55 km/h 0.0 mm Very extreme 80
10 Sept 31.1 °C 21 % 56 km/h 0.0 mm Very extreme 80
11 Sept 31.0 °C 24 % 52 km/h 0.0 mm Very extreme 73
12 Sept after 29.4 °C 33 % 52 km/h 0.0 mm Extreme 55
13 Sept after 31.3 °C 29 % 50 km/h 0.0 mm Extreme 59
14 Sept after 31.0 °C 32 % 49 km/h 0.0 mm Extreme 62
15 Sept after 31.9 °C 22 % 50 km/h 0.0 mm Extreme 63
16 Sept after 30.3 °C 34 % 44 km/h 0.0 mm Very high 44
17 Sept after 31.8 °C 34 % 42 km/h 0.0 mm Very high 44
18 Sept after 32.0 °C 31 % 41 km/h 0.0 mm Very high 49
19 Sept after 32.3 °C 34 % 37 km/h 0.0 mm Very high 44
20 Sept after 32.3 °C 34 % 38 km/h 0.0 mm Very high 44
21 Sept after 31.3 °C 44 % 38 km/h 0.2 mm Very high 46

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 16 Aug 2019
After · 18 Sept 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 365Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Arnhem fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 23 August 2019 to 11 September 2019 (20 days). The perimeter dates it from 23 August 2019 to 9 September 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 7,294 hectares (72.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Arnhem (7,295 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 33.4 °C, humidity dropped to 18 % and gusts hit 57 km/h. The fire danger index (FWI) reached 83, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 9 September 2019 → 11 September 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 23 August 2019 to 9 September 2019. 365 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.