Skip to content
worldfires
CA · Canada · –

Division No. 22, Unorganized fire, 1 June 2018 Division No. 22, Unorganized

Out · last detection

The fire started on in Division No. 22, Unorganized, Canada, and satellites saw it burning for 24 days. Canada’s CWFIS (Natural Resources Canada) mapped an official burnt perimeter of 5,944 hectares from satellite imagery, spread across a single census subdivision.

It is number 74 by size of the 220 fires with a page that started in Manitoba since 2016. Number 66 in Canada in 2018, of 211.

Burnt area
5,944ha
official perimeter (CWFIS)
Duration
24days
1 Jun 2018 – 24 Jun 2018
Census subdivisions hit
1
municipalities
Started on
1 Jun
2018
Heat detections
194
in a single hotspot: 185 MW
Danger at start
21
High · FWI index
Average daily power
391MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 1 Jun24 Jun
25 Jun 2018

How it evolved, day by day

1 Jun 2018 · 263 MW · 21 11 Jun 2018 · 2,711 MW · 85 12 Jun 2018 · 124 MW · 6 13 Jun 2018 · 2 MW · 1 14 Jun 2018 · 1,198 MW · 35 15 Jun 2018 · 8 MW · 8 18 Jun 2018 · 11 MW · 2 21 Jun 2018 · 217 MW · 5 22 Jun 2018 · 16 MW · 15 23 Jun 2018 · 107 MW · 16 24 Jun 2018 · 36 MW · 19 25 Jun 2018 · 3 MW · 2
11 Jun 18 Jun 23 Jun

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

31°high
54km/h · peak gust
21%lowest humidity

It had gone 5 days without rain (1 mm or more) when it started. Rain came after the fire: 1.8 mm on 26 Jun.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 3.8% of the area of London (59 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each census subdivision

  1. Division No. 22, Unorganized where it started
    5,962 ha
    0.1 %

Burnt area inside each census subdivision, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
1 Jun 15.4 °C 22 % 31 km/h 0.0 mm High 21
2 Jun 14.8 °C 30 % 54 km/h 2.8 mm High 34
3 Jun 7.7 °C 90 % 36 km/h 19.6 mm Very low 0
4 Jun 14.2 °C 39 % 34 km/h 1.4 mm Very low 0
5 Jun 13.4 °C 40 % 27 km/h 0.8 mm Very low 2
6 Jun 16.3 °C 47 % 30 km/h 2.2 mm Very low 1
7 Jun 22.7 °C 27 % 37 km/h 0.0 mm Low 8
8 Jun 25.6 °C 26 % 26 km/h 0.0 mm Moderate 14
9 Jun 26.4 °C 37 % 37 km/h 0.0 mm Moderate 18
10 Jun 30.2 °C 34 % 50 km/h 0.0 mm High 26
11 Jun 31.3 °C 32 % 50 km/h 0.0 mm High 32
12 Jun 25.6 °C 30 % 41 km/h 6.2 mm Very low 3
13 Jun 18.5 °C 54 % 42 km/h 3.2 mm Very low 2
14 Jun 29.7 °C 26 % 38 km/h 0.6 mm Low 11
15 Jun 23.3 °C 53 % 52 km/h 3.4 mm Low 7
16 Jun 19.0 °C 54 % 45 km/h 0.0 mm Very low 4
17 Jun 21.3 °C 39 % 53 km/h 0.0 mm Moderate 18
18 Jun 27.6 °C 30 % 30 km/h 0.0 mm Moderate 16
19 Jun 22.2 °C 33 % 38 km/h 0.0 mm Moderate 21
20 Jun 23.4 °C 22 % 24 km/h 0.0 mm Moderate 20
21 Jun 30.2 °C 32 % 44 km/h 0.0 mm High 24
22 Jun 20.4 °C 28 % 30 km/h 0.0 mm High 25
23 Jun 22.5 °C 21 % 38 km/h 0.2 mm High 30
24 Jun 25.8 °C 22 % 31 km/h 0.0 mm High 26
25 Jun after 30.2 °C 35 % 49 km/h 0.0 mm Very high 39
26 Jun after 27.2 °C 52 % 41 km/h 1.8 mm High 22

Its twins: fires that started in the same weather

It started with an FWI of 21.3, a minimum humidity of 22% and 5 days without rain. Fires in the area that started in weather like this since 2016: 11.

FWI at the start 21.3
Minimum humidity 22 %
Days without rain 5
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Division No. 22, Unorganized fire, June 2016
1,450 ha 2 days FWI 21.4 Min. humidity 28 % 168 km away, in 2016

First rain (1 mm or more) after it ended: 5.2 mm on 25 Jun.

What happened to them

Fires in the area that started in similar weather: 11. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.8 mmfirst rain
26 Jun2 days after it ended
54km/h · max. gust

It was considered over on 24 Jun, and on 26 Jun 1.8 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 25 May 2018
After · 1 Jul 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 194Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Frequently asked questions

How long did the Division No. 22, Unorganized fire last?
It burned between 1 June 2018 and 24 June 2018: 24 days, according to the dates recorded by Canada’s CWFIS and the heat detections seen by satellite.
How much area did it burn?
The official perimeter mapped by Canada’s CWFIS (Natural Resources Canada) is 5,944 hectares (59.4 km²). Other tallies, such as those of provincial agencies, may give slightly different figures.
Which census subdivisions burned?
The fire only entered Division No. 22, Unorganized (5,962 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 31.3 °C, humidity dropped to 21 % and gusts hit 54 km/h. The fire danger index (FWI) reached 34, class High.
Where does this data come from?
From the official burnt perimeter of Canada’s CWFIS (NBAC, Natural Resources Canada) or, for the current season and until NBAC publishes it, the one rebuilt by GWIS (Copernicus); from NASA FIRMS VIIRS hotspots; and from the administrative boundaries of Canada. It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 25 June 2018 → 24 June 2018.
  2. Start date: 8 June 2018 → 1 June 2018.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: NBAC (Natural Resources Canada), official.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 194 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter is official: it comes from the National Burned Area Composite (NBAC) of the Canadian Wildland Fire Information System (CWFIS), Natural Resources Canada, which maps it on satellite imagery and publishes it under the Open Government Licence – Canada. Until NBAC publishes the current season, this year’s fires carry the perimeter rebuilt from heat detections by GWIS (Copernicus, CC BY 4.0), which is approximate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Census subdivision boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per census subdivision is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.