Del Nayar fire, 1 June 2017 Mezquitic, Del Nayar, Valparaíso
The fire started on 1 June 2017 in Del Nayar, Mexico, and satellites saw it burning for 22 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,738 hectares from heat detections, spread across 3 municipalities.
It is the 32th largest in Nayarit since 2016 (of 181 with a page). Number 72 in Mexico in 2017, of 374.
Compare with…
- Burnt area
- 4,738ha
- GWIS perimeter (Copernicus)
- Duration
- 22days
- 1 Jun 2017 – 22 Jun 2017
- Municipalities hit
- 3
- municipalities
- Started on
- 1 Jun
- 2017
- Heat detections
- 305
- in a single hotspot: 46 MW
- Danger at start
- 33
- High · FWI index
- Average daily power
- 110MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 39 days without rain (1 mm or more) when it started. Rain came after the fire: 2.2 mm on 16 Jun.
This area had burned before
No earlier perimeters overlap this fire since 2016, when the satellite record begins.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
2,325 ha reached on 3 Jun0.7 %
-
Del Nayar where it started1,767 ha reached on 1 Jun0.3 %
-
673 ha reached on 7 Jun0.1 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2015Inside the perimeter there were about 0.40 hectares of built-up land and about 50 residents (GHSL 2015, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
Several official records match this area
According to CONAFOR, 2 fires started inside this perimeter on these dates, totalling 2,804 ha (the satellite measured 4,738 ha). The two figures differ a lot, so these may not be exactly the same fire: take them as nearby records.
CONAFOR records each fire that started at a different time or place separately; the satellite sees a single burned area, so this page groups them together. The numbers on the map show where each one started.
- 1 Del Nayar Comunidad Indigene Guadalupe 5 June 2017 2,411 ha · extinguished on 12 June 2017 · cause: unknown
- 2 Mezquitic Guadalupe 10 June 2017 393 ha · extinguished on 11 June 2017 · cause: negligence
Total according to CONAFOR: 2,804 ha, 59 % of the 4,738 ha in the satellite perimeter.
CONAFOR (Comisión Nacional Forestal), estadística de incendios forestales en datos.gob.mx (CC BY 4.0). This is the agency’s consolidated statistic: it measures the area in its own way, which is why it can differ from the satellite.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 1 Jun | 29.4 °C | 22 % | 48 km/h | 0.8 mm | High 33 |
| 2 Jun | 29.5 °C | 17 % | 52 km/h | 0.0 mm | Very high 41 |
| 3 Jun | 28.4 °C | 19 % | 49 km/h | 0.0 mm | Very high 40 |
| 4 Jun | 29.2 °C | 17 % | 48 km/h | 0.0 mm | Very high 41 |
| 5 Jun | 29.7 °C | 23 % | 41 km/h | 0.4 mm | Very high 38 |
| 6 Jun | 29.4 °C | 27 % | 40 km/h | 0.3 mm | High 37 |
| 7 Jun | 28.0 °C | 35 % | 36 km/h | 3.5 mm | Low 7 |
| 8 Jun | 27.8 °C | 30 % | 40 km/h | 2.6 mm | Low 9 |
| 9 Jun | 26.7 °C | 44 % | 36 km/h | 4.4 mm | Very low 4 |
| 10 Jun | 25.6 °C | 50 % | 35 km/h | 5.2 mm | Very low 2 |
| 11 Jun | 26.2 °C | 40 % | 35 km/h | 1.3 mm | Very low 5 |
| 12 Jun | 29.4 °C | 30 % | 42 km/h | 0.7 mm | Moderate 16 |
| 13 Jun | 31.1 °C | 26 % | 41 km/h | 0.1 mm | High 23 |
| 14 Jun | 31.1 °C | 23 % | 42 km/h | 0.2 mm | High 27 |
| 15 Jun | 31.7 °C | 21 % | 41 km/h | 0.6 mm | High 28 |
| 16 Jun | 25.1 °C | 46 % | 38 km/h | 2.2 mm | Low 6 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 305Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 19,923 haValparaísoMay 2023 · 39 days · 6 km away
- 6,298 haMezquital5 May 2023 · 14 days · 21 km away
- 6,481 haMezquital3 April 2017 · 20 days · 26 km away
- 10,929 haDel NayarApril 2019 · 25 days · 29 km away
- 6,298 haDel Nayar1 April 2017 · 18 days · 32 km away
- 20,388 haMezquital8 April 2022 · 31 days · 35 km away
Frequently asked questions
- How long did the Del Nayar fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 1 June 2017 to 22 June 2017 (22 days). The perimeter dates it from 1 June 2017 to 15 June 2017.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,738 hectares (47.4 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 3 municipalities: Mezquitic (2,325 ha, 0.7 %); Del Nayar (1,767 ha, 0.3 %); Valparaíso (673 ha, 0.1 %).
- What was the weather like?
- During the fire the temperature reached 31.7 °C, humidity dropped to 17 % and gusts hit 52 km/h. The fire danger index (FWI) reached 41, class Very high.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mexico (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 911 · Emergency number and official warnings ›
Satellite cross-check
History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
- Last day with fire: 15 June 2017 → 22 June 2017.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates adjusted with the VIIRS detections inside the perimeter, which said 1 June 2017 to 15 June 2017. 305 Suomi-NPP VIIRS detections on those dates.
- Compared with CONAFOR: 2,804 official ha against 4,738 ha of perimeter; similar, but with reservations.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.