Skip to content
worldfires
ET · Ethiopia · –

Dangura fire, 11 February 2020 Dangura

Out · last detection

The fire started on in Dangura, Ethiopia, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,080 hectares from heat detections, spread across a single municipality.

It is number 590 by size of the 635 fires with a page that started in Beneshangul Gumu since 2016. Number 161 in Ethiopia in 2020, of 177.

Compare with…
Burnt area
2,080ha
GWIS perimeter (Copernicus)
Duration
13days
11 Feb 2020 – 23 Feb 2020
Municipalities hit
1
districts
Started on
11 Feb
2020
Heat detections
41
in a single hotspot: 39 MW
Danger at start
47
Very high · FWI index
Average daily power
90MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 11 Feb23 Feb
23 Feb 2020

How it evolved, day by day

14 Feb 2020 · 54 MW · 10 15 Feb 2020 · 261 MW · 23 16 Feb 2020 · 43 MW · 7 23 Feb 2020 · 1 MW · 1
14 Feb 15 Feb 16 Feb 23 Feb

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
37km/h · peak gust
10%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 1.3% of the area of London (21 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Dangura where it started
    2,093 ha reached on 14 Feb
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 37 % of the area in Ethiopia

Day High Min. humidity Peak gust Rain Danger (FWI)
11 Feb 31.9 °C 19 % 35 km/h 0.0 mm Very high 47
12 Feb 31.8 °C 21 % 30 km/h 0.0 mm Very high 41
13 Feb 34.7 °C 18 % 28 km/h 0.0 mm Very high 40
14 Feb 36.4 °C 17 % 20 km/h 0.0 mm Very high 42
15 Feb 36.1 °C 17 % 22 km/h 0.0 mm Very high 45
16 Feb 35.7 °C 19 % 26 km/h 0.0 mm Very high 44
17 Feb 37.9 °C 13 % 25 km/h 0.0 mm Very high 48
18 Feb 37.3 °C 15 % 31 km/h 0.0 mm Extreme 52
19 Feb 37.3 °C 10 % 37 km/h 0.0 mm Extreme 52
20 Feb 35.9 °C 11 % 30 km/h 0.0 mm Extreme 54
21 Feb 36.7 °C 14 % 33 km/h 0.0 mm Extreme 51
22 Feb 37.0 °C 15 % 28 km/h 0.0 mm Extreme 50
23 Feb 37.0 °C 13 % 26 km/h 0.0 mm Very high 48
24 Feb after 35.9 °C 14 % 32 km/h 0.0 mm Very high 49
25 Feb after 32.8 °C 17 % 35 km/h 0.0 mm Extreme 54
26 Feb after 36.0 °C 17 % 27 km/h 0.0 mm Very high 47
27 Feb after 37.6 °C 18 % 29 km/h 0.0 mm Very high 45
28 Feb after 38.0 °C 16 % 37 km/h 0.0 mm Extreme 51
29 Feb after 36.2 °C 12 % 32 km/h 0.0 mm Extreme 52
1 Mar after 36.6 °C 9 % 33 km/h 0.0 mm Very high 49
2 Mar after 37.0 °C 16 % 30 km/h 0.0 mm Extreme 52
3 Mar after 37.2 °C 11 % 31 km/h 0.0 mm Very high 48
4 Mar after 37.3 °C 11 % 30 km/h 0.0 mm Extreme 58

Its twins: fires that started in the same weather

It started with an FWI of 47.4, a minimum humidity of 19% and more than two months without rain. Fires in the area that started in weather like this since 2016: 30.

FWI at the start 47.4
Minimum humidity 19 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Dangura fire, January 2022
3,676 ha 5 days FWI 45.8 Min. humidity 19 % 31 km away, in 2022

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

8 days
median duration
3,570 ha
median area
7 %
went past 10,000 ha
2.6 mm
rain at the end (median; 1 of 30 had it)

It stayed below its twins: 2,080 ha against a median of 3,570 ha. It lasted 13 days, against 8 days.

In 29 of 30, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
37km/h · max. gust

It was considered over on 23 Feb, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 1 of 30, with a median of 2.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 4 Feb 2020
After · 1 Mar 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 41Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Ethiopia

Frequently asked questions

How long did the Dangura fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 11 February 2020 to 23 February 2020 (13 days). The perimeter dates it from 14 February 2020 to 16 February 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,080 hectares (20.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Dangura (2,093 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 37.9 °C, humidity dropped to 10 % and gusts hit 37 km/h. The fire danger index (FWI) reached 54, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Ethiopia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 30. Their median duration was 8 days and their median area 3,570 ha; 7 % went past 10,000 ha. In 29 of 30, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 16 February 2020 → 23 February 2020.
  2. Start date: 14 February 2020 → 11 February 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 14 February 2020 to 16 February 2020. 41 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.