Skip to content
worldfires
BR · Brazil · –

Cumaru do Norte fire, 24 August 2019 Cumaru do Norte, Santa Maria das Barreiras

Out · last detection

The fire started on in Cumaru do Norte, Brazil, and satellites saw it burning for 29 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 29,887 hectares from heat detections, spread across 2 municipalities.

It is number 54 by size of the 957 fires with a page that started in Pará since 2016. Number 28 in Brazil in 2019, of 973.

Burnt area
29,887ha
GWIS perimeter (Copernicus)
Duration
29days
24 Aug 2019 – 21 Sept 2019
Municipalities hit
2
municipalities
Started on
24 Aug
2019
Heat detections
1,134
in a single hotspot: 131 MW
Danger at start
42
Very high · FWI index
Average daily power
289MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 24 Aug21 Sept
21 Sept 2019

How it evolved, day by day

24 Aug 2019 · 47 MW · 13 25 Aug 2019 · 28 MW · 12 26 Aug 2019 · 163 MW · 17 27 Aug 2019 · 250 MW · 34 28 Aug 2019 · 94 MW · 32 29 Aug 2019 · 444 MW · 52 30 Aug 2019 · 276 MW · 40 31 Aug 2019 · 174 MW · 39 1 Sept 2019 · 45 MW · 13 2 Sept 2019 · 62 MW · 9 3 Sept 2019 · 55 MW · 14 4 Sept 2019 · 105 MW · 19 5 Sept 2019 · 404 MW · 70 6 Sept 2019 · 320 MW · 27 7 Sept 2019 · 810 MW · 83 8 Sept 2019 · 1,653 MW · 190 9 Sept 2019 · 527 MW · 97 10 Sept 2019 · 812 MW · 100 11 Sept 2019 · 596 MW · 86 12 Sept 2019 · 217 MW · 32 13 Sept 2019 · 107 MW · 19 14 Sept 2019 · 258 MW · 48 15 Sept 2019 · 20 MW · 8 16 Sept 2019 · 55 MW · 8 17 Sept 2019 · 10 MW · 1 18 Sept 2019 · 74 MW · 4 19 Sept 2019 · 629 MW · 26 20 Sept 2019 · 120 MW · 32 21 Sept 2019 · 27 MW · 9
24 Aug 30 Aug 8 Sept 17 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
46km/h · peak gust
26%lowest humidity

It had gone 45 days without rain (1 mm or more) when it started. Rain came after the fire: 3.3 mm on 27 Sept.

This area had burned before

87% of the perimeter overlaps earlier fires recorded since 2016: 2,954 ha in 2016, 25,787 ha in 2017. Part of it burned more than once, so the yearly figures add up to more than the 26,076 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 19% of the area of London (299 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Cumaru do Norte 14,036 inhabitants where it started
    16,905 ha reached on 24 Aug
    1.0 %
  2. Santa Maria das Barreiras 16,548 inhabitants
    14,446 ha reached on 25 Aug
    1.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area4.2 ha
Residents≈ 400

Inside the perimeter there were about 4.2 hectares of built-up land and about 400 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
24 Aug 30.6 °C 40 % 34 km/h 0.0 mm Very high 42
25 Aug 31.5 °C 32 % 32 km/h 0.0 mm Very high 40
26 Aug 32.6 °C 31 % 39 km/h 0.0 mm Very high 43
27 Aug 32.8 °C 30 % 38 km/h 0.0 mm Very high 44
28 Aug 33.0 °C 27 % 35 km/h 0.0 mm Very high 47
29 Aug 34.0 °C 27 % 33 km/h 0.0 mm Very high 45
30 Aug 34.3 °C 26 % 30 km/h 0.0 mm Very high 43
31 Aug 33.5 °C 28 % 29 km/h 0.0 mm Very high 43
1 Sept 33.8 °C 29 % 27 km/h 0.0 mm Very high 43
2 Sept 34.4 °C 29 % 28 km/h 0.0 mm Very high 41
3 Sept 34.7 °C 29 % 28 km/h 0.0 mm Very high 39
4 Sept 34.1 °C 33 % 32 km/h 0.0 mm Very high 39
5 Sept 33.3 °C 35 % 36 km/h 0.0 mm Very high 38
6 Sept 31.7 °C 42 % 32 km/h 0.0 mm High 31
7 Sept 31.9 °C 30 % 42 km/h 0.0 mm Very high 42
8 Sept 32.8 °C 26 % 46 km/h 0.0 mm Extreme 54
9 Sept 34.0 °C 31 % 32 km/h 0.0 mm Very high 41
10 Sept 32.4 °C 36 % 36 km/h 0.0 mm Very high 46
11 Sept 34.9 °C 29 % 32 km/h 0.0 mm Very high 41
12 Sept 33.5 °C 33 % 31 km/h 0.0 mm Very high 43
13 Sept 34.6 °C 29 % 29 km/h 0.0 mm Very high 41
14 Sept 33.4 °C 32 % 28 km/h 0.0 mm High 37
15 Sept 32.7 °C 39 % 28 km/h 0.2 mm High 34
16 Sept 34.3 °C 33 % 35 km/h 0.0 mm High 36
17 Sept 33.6 °C 34 % 26 km/h 0.0 mm High 37
18 Sept 33.6 °C 35 % 33 km/h 0.0 mm High 38
19 Sept 34.3 °C 35 % 40 km/h 0.0 mm Very high 42
20 Sept 34.2 °C 37 % 31 km/h 0.0 mm High 38
21 Sept 33.2 °C 39 % 29 km/h 0.0 mm High 36
22 Sept after 31.4 °C 45 % 27 km/h 0.8 mm High 31
23 Sept after 33.3 °C 43 % 27 km/h 0.3 mm High 26
24 Sept after 32.4 °C 44 % 28 km/h 0.1 mm High 27
25 Sept after 33.7 °C 36 % 30 km/h 0.0 mm High 32
26 Sept after 30.9 °C 46 % 31 km/h 0.5 mm High 37
27 Sept after 32.2 °C 43 % 26 km/h 3.3 mm High 31

Its twins: fires that started in the same weather

It started with an FWI of 41.8, a minimum humidity of 40% and 45 days without rain. Fires in the area that started in weather like this since 2016: 42.

FWI at the start 41.8
Minimum humidity 40 %
Days without rain 45
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Pium fire, June 2024
4,904 ha 9 days FWI 40.7 Min. humidity 41 % 204 km away, in 2024

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

20 days
median duration
4,788 ha
median area
33 %
went past 10,000 ha
3.0 mm
rain at the end (median; 24 of 42 had it)

It was 6.2 times larger than the median of its twins and lasted 29 days, against 20 days.

Only 3 of its 42 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 18 of 42, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

3.3 mmfirst rain
27 Sept6 days after it ended
46km/h · max. gust

It was considered over on 21 Sept, and on 27 Sept 3.3 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 24 of 42, with a median of 3.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 17 Aug 2019
After · 28 Sept 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 1,134Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Cumaru do Norte fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 24 August 2019 to 21 September 2019 (29 days). The perimeter dates it from 24 August 2019 to 15 September 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 29,887 hectares (298.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Cumaru do Norte (16,905 ha, 1.0 %); Santa Maria das Barreiras (14,446 ha, 1.4 %).
What was the weather like?
During the fire the temperature reached 34.9 °C, humidity dropped to 26 % and gusts hit 46 km/h. The fire danger index (FWI) reached 54, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 42. Their median duration was 20 days and their median area 4,788 ha; 33 % went past 10,000 ha. Only 3 of its 42 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 18 of 42, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 31,167 → 29,887 ha.
  2. Last day with fire: 15 September 2019 → 21 September 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 4 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 24 August 2019 to 15 September 2019. 1,134 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.