Corumbá fire, 19 August 2017 Corumbá
The fire started on 19 August 2017 in Corumbá, Brazil, and satellites saw it burning for 22 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 12,286 hectares from heat detections, spread across a single municipality.
It is the 102th largest in Mato Grosso do Sul since 2016 (of 506 with a page). Number 137 in Brazil in 2017, of 994.
Compare with…
- Burnt area
- 12,286ha
- GWIS perimeter (Copernicus)
- Duration
- 22days
- 19 Aug 2017 – 9 Sept 2017
- Municipalities hit
- 1
- municipalities
- Started on
- 19 Aug
- 2017
- Heat detections
- 443
- in a single hotspot: 38 MW
- Danger at start
- 27
- High · FWI index
- Average daily power
- 194MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 1.5 mm on 11 Sept.
This area had burned before
9% of the perimeter overlaps earlier fires recorded since 2016: 1,143 ha in 2016.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
12,228 ha reached on 19 Aug0.2 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 19 Aug | 36.4 °C | 41 % | 46 km/h | 0.0 mm | High 27 |
| 20 Aug | 27.9 °C | 67 % | 51 km/h | 11.1 mm | Very low 2 |
| 21 Aug | 26.9 °C | 50 % | 36 km/h | 0.0 mm | Low 7 |
| 22 Aug | 31.9 °C | 47 % | 21 km/h | 0.0 mm | Moderate 13 |
| 23 Aug | 35.6 °C | 36 % | 38 km/h | 0.2 mm | High 24 |
| 24 Aug | 36.6 °C | 29 % | 38 km/h | 0.0 mm | High 30 |
| 25 Aug | 36.8 °C | 29 % | 36 km/h | 0.0 mm | High 29 |
| 26 Aug | 37.8 °C | 26 % | 30 km/h | 0.0 mm | High 29 |
| 27 Aug | 38.1 °C | 27 % | 23 km/h | 0.0 mm | High 30 |
| 28 Aug | 39.2 °C | 24 % | 25 km/h | 0.0 mm | High 32 |
| 29 Aug | 40.2 °C | 22 % | 29 km/h | 0.0 mm | High 35 |
| 30 Aug | 39.3 °C | 19 % | 35 km/h | 0.0 mm | Very high 44 |
| 31 Aug | 36.5 °C | 33 % | 35 km/h | 0.0 mm | Very high 40 |
| 1 Sept | 38.9 °C | 19 % | 22 km/h | 0.0 mm | High 37 |
| 2 Sept | 38.8 °C | 19 % | 38 km/h | 0.0 mm | Very high 43 |
| 3 Sept | 38.4 °C | 19 % | 41 km/h | 0.0 mm | Very high 46 |
| 4 Sept | 37.9 °C | 25 % | 37 km/h | 0.0 mm | Very high 44 |
| 5 Sept | 37.5 °C | 22 % | 30 km/h | 0.0 mm | Very high 45 |
| 6 Sept | 35.9 °C | 28 % | 27 km/h | 0.0 mm | Very high 39 |
| 7 Sept | 37.9 °C | 22 % | 34 km/h | 0.0 mm | Very high 41 |
| 8 Sept | 39.1 °C | 26 % | 26 km/h | 0.0 mm | Very high 40 |
| 9 Sept | 39.6 °C | 24 % | 29 km/h | 0.0 mm | Very high 41 |
| 10 Sept after | 39.4 °C | 24 % | 38 km/h | 0.0 mm | Very high 44 |
| 11 Sept after | 34.8 °C | 45 % | 34 km/h | 1.5 mm | Moderate 20 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 443Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 36,275 haCorumbá21 September 2020 · 19 days · 11 km away
- 36,868 haCorumbá16 July 2017 · 31 days · 13 km away
- 31,667 haCorumbá27 September 2020 · 8 days · 26 km away
- 33,753 haCorumbá7 August 2019 · 13 days · 31 km away
- 82,094 haBarão de Melgaço5 September 2024 · 43 days · 32 km away
- 20,668 haCorumbá22 August 2017 · 25 days · 32 km away
Frequently asked questions
- How long did the Corumbá fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 19 August 2017 to 9 September 2017 (22 days). The perimeter dates it from 22 August 2017 to 8 September 2017.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 12,286 hectares (122.9 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Corumbá (12,228 ha, 0.2 %).
- What was the weather like?
- During the fire the temperature reached 40.2 °C, humidity dropped to 19 % and gusts hit 51 km/h. The fire danger index (FWI) reached 46, class Very high.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 193 · Emergency number and official warnings ›
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates adjusted with the VIIRS detections inside the perimeter, which said 22 August 2017 to 8 September 2017. 443 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.