Correns fire, 24 July 2026 Correns, Montfort-sur-Argens, Le Val
The fire started on 24 July 2026 in Correns, France, and satellites saw it burning for 10 days. Copernicus mapped a burnt perimeter of 2,047 hectares from satellite imagery, spread across 4 municipalities.
It is the 5th largest in Var since 2016 (of 16 with a page). Number 6 in France in 2026, of 114.
Compare with…
- Burnt area
- 2,047ha
- Copernicus perimeter
- Duration
- ≈ 10days
- 24 Jul 2026 – 2 Aug 2026
- Municipalities hit
- 4
- communes
- Started on
- 24 Jul
- 2026
- Heat detections
- 139
- in a single hotspot: 205 MW
- Danger at start
- 45
- Very high · FWI index
- Average daily power
- 232MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 4 days without rain (1 mm or more) when it started.
This area had burned before
22% of the perimeter overlaps earlier fires recorded since 2016: 441 ha in 2016.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
1,374 ha reached on 24 Jul37 %
-
Montfort-sur-Argens 1,453 inhabitants · fire reached the centre452 ha reached on 24 Jul38 %
-
Le Val 4,335 inhabitants · 2.1 km from the centre181 ha reached on 1 Aug4.6 %
-
Châteauvert 141 inhabitants · 0.6 km from the centre40 ha reached on 1 Aug1.4 %
Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
What burned
- Mixed forest39 %
- Coniferous forest22 %
- Other natural land20 %
- Sclerophyllous scrub7.9 %
- Agricultural areas5.4 %
- Scrub and transitional woodland4.7 %
- Artificial surfaces1.3 %
Natura 2000 protected area affected: 99 %
- LIC Val d'Argens FR9301626
Natura 2000 sites (European Environment Agency, 2024 release) crossed by the perimeter.
Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.
People and buildings inside the perimeter
GHSL 2025Inside the perimeter there were about 8.2 hectares of built-up land and about 400 residents (GHSL 2025, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 31 Jul | 37.0 °C | 16 % | 38 km/h | 0.0 mm | Very high 45 |
| 1 Aug | 36.7 °C | 24 % | 43 km/h | 0.0 mm | Very high 48 |
| 2 Aug | 35.4 °C | 30 % | 39 km/h | 0.0 mm | Very high 41 |
| 3 Aug after | 34.3 °C | 36 % | 56 km/h | 0.0 mm | Very high 45 |
| 4 Aug after | 32.1 °C | 47 % | 50 km/h | 0.9 mm | High 27 |
| 5 Aug after | 36.2 °C | 24 % | 22 km/h | 0.0 mm | High 32 |
| 6 Aug after | 36.7 °C | 19 % | 50 km/h | 0.0 mm | Extreme 52 |
| 7 Aug after | 35.9 °C | 18 % | 50 km/h | 0.0 mm | Extreme 54 |
| 8 Aug after | 35.8 °C | 26 % | 33 km/h | 0.0 mm | Very high 43 |
| 9 Aug after | 34.8 °C | 35 % | 36 km/h | 0.4 mm | High 37 |
| 10 Aug after | 36.7 °C | 23 % | 35 km/h | 0.0 mm | Very high 42 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 2 August 2026 the air beside the fire reached 48 µg/m³ of PM2.5. That day averaged 18: 1.2 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 139Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Correns fire last?
- The official perimeter only gives the start date (31 July 2026). The end comes from the heat detections inside the perimeter: it burned until 2 August 2026 (10 days from 24 July 2026), the last day with detections before more than 10 days in a row without any, so it is approximate.
- How much area did it burn?
- The perimeter Copernicus measured from satellite imagery is 2,047 hectares (20.5 km²). Official national figures may differ.
- Which municipalities burned?
- The fire entered 4 municipalities: Correns (1,374 ha, 37 %); Montfort-sur-Argens (452 ha, 38 %); Le Val (181 ha, 4.6 %); Châteauvert (40 ha, 1.4 %).
- Did the fire reach a town?
- The fire started in Correns and reached its centre: the point marking it was inside the burnt area or less than 500 metres from it. That does not mean houses burned.
- What was the weather like?
- During the fire the temperature reached 37.0 °C, humidity dropped to 16 % and gusts hit 38 km/h. The fire danger index (FWI) reached 45, class Very high.
- Where does this data come from?
- From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of France (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 112 · 18 · Emergency number and official warnings ›
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: EFFIS (Copernicus), mapped on satellite imagery; 3 polygons grouped in this page.
- The official perimeter has no end date: the end is the last day with VIIRS detections inside the perimeter before a gap of more than 10 days (150 days at most), so it is approximate. 139 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM5 (Open Data Commons Attribution License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.