Skip to content
worldfires
AU · Australia · →

Cook fire, 21 September 2026 Cook

Burning · last detection 26 Oct 2026, 14:59 UTC

The fire started on 21 September 2026 in Cook, Australia, and satellites saw it burning for 36 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 37,441 hectares from heat detections, spread across a single municipality.

It is the 143th largest in Queensland since 2016 (of 1742 with a page). Number 59 in Australia in 2026, of 886.

Compare with…

Is it still active?

Satellites detected fire on 26 Oct 2026, 14:59 UTC. Everything suggests it is still burning. Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.

Burnt area
37,441ha
GWIS perimeter (Copernicus)
Duration
36days
21 Sept 2026 – 26 Oct 2026
Municipalities hit
1
local government areas
Started on
21 Sept
2026
Heat detections
1,684
in a single hotspot: 80 MW
Danger at start
34
High · FWI index
Average daily power
236MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 21 Sept26 Oct
26 Oct 2026

How it evolved, day by day

21 Sept 2026 · 34 MW · 2 22 Sept 2026 · 10 MW · 7 24 Sept 2026 · 1 MW · 1 25 Sept 2026 · 45 MW · 15 26 Sept 2026 · 25 MW · 7 27 Sept 2026 · 29 MW · 15 28 Sept 2026 · 263 MW · 51 29 Sept 2026 · 102 MW · 44 30 Sept 2026 · 1,267 MW · 156 1 Oct 2026 · 366 MW · 94 2 Oct 2026 · 518 MW · 145 3 Oct 2026 · 97 MW · 69 4 Oct 2026 · 932 MW · 134 5 Oct 2026 · 272 MW · 63 6 Oct 2026 · 370 MW · 75 7 Oct 2026 · 410 MW · 104 8 Oct 2026 · 487 MW · 69 9 Oct 2026 · 321 MW · 58 10 Oct 2026 · 38 MW · 23 11 Oct 2026 · 264 MW · 43 12 Oct 2026 · 112 MW · 16 13 Oct 2026 · 64 MW · 31 14 Oct 2026 · 316 MW · 65 15 Oct 2026 · 310 MW · 54 16 Oct 2026 · 40 MW · 37 17 Oct 2026 · 12 MW · 7 18 Oct 2026 · 34 MW · 25 19 Oct 2026 · 428 MW · 71 20 Oct 2026 · 95 MW · 24 21 Oct 2026 · 616 MW · 72 22 Oct 2026 · 121 MW · 44 23 Oct 2026 · 24 MW · 5 24 Oct 2026 · 48 MW · 24 25 Oct 2026 · 83 MW · 26 26 Oct 2026 · 109 MW · 15
21 Sept 27 Sept 30 Sept 2 Oct 7 Oct 12 Oct 17 Oct 22 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
53km/h · peak gust
30%lowest humidity

It had gone 11 days without rain (1 mm or more) when it started.

This area had burned before

38% of the perimeter overlaps earlier fires recorded since 2016: 115 ha in 2016, 3,075 ha in 2017, 303 ha in 2018, 12,343 ha in 2019, 4,901 ha in 2022, 978 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 14,110 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 24% of the area of London (374 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Cook where it started
    37,984 ha reached on 21 Sept
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives

Day High Min. humidity Peak gust Rain Danger (FWI)
21 Sept 29.3 °C 35 % 41 km/h 0.0 mm High 34
22 Sept 29.2 °C 37 % 43 km/h 0.0 mm High 34
23 Sept 29.0 °C 44 % 49 km/h 1.2 mm High 24
24 Sept 29.5 °C 47 % 45 km/h 2.0 mm Moderate 14
25 Sept 29.7 °C 44 % 49 km/h 1.1 mm High 22
26 Sept 30.2 °C 43 % 49 km/h 0.3 mm High 29
27 Sept 30.5 °C 41 % 45 km/h 0.3 mm High 28
28 Sept 30.4 °C 45 % 48 km/h 0.4 mm High 32
29 Sept 30.5 °C 41 % 51 km/h 1.1 mm High 27
30 Sept 30.3 °C 35 % 48 km/h 0.0 mm High 33
1 Oct 29.6 °C 41 % 53 km/h 0.4 mm High 36
2 Oct 29.6 °C 34 % 52 km/h 0.0 mm High 37
3 Oct 30.2 °C 34 % 46 km/h 0.0 mm High 35
4 Oct 30.4 °C 34 % 40 km/h 0.0 mm High 32
5 Oct 32.6 °C 31 % 40 km/h 0.0 mm High 36
6 Oct 32.5 °C 32 % 46 km/h 0.0 mm High 37
7 Oct 33.0 °C 30 % 36 km/h 0.0 mm High 36
8 Oct 32.4 °C 33 % 39 km/h 0.0 mm Very high 38
9 Oct 33.1 °C 38 % 35 km/h 0.0 mm High 36
10 Oct 34.0 °C 35 % 37 km/h 0.7 mm High 33
11 Oct 33.7 °C 33 % 41 km/h 0.0 mm High 36
12 Oct 33.2 °C 37 % 44 km/h 0.0 mm Very high 39
13 Oct 33.9 °C 34 % 42 km/h 0.0 mm High 37
14 Oct 33.8 °C 33 % 40 km/h 0.0 mm High 37
15 Oct 33.6 °C 35 % 44 km/h 0.0 mm Very high 38
16 Oct 32.9 °C 42 % 45 km/h 0.8 mm High 30
17 Oct 33.2 °C 39 % 46 km/h 0.4 mm High 35
18 Oct 32.0 °C 43 % 36 km/h 10.5 mm Low 6
19 Oct 32.9 °C 43 % 41 km/h 2.9 mm Low 11
20 Oct 32.9 °C 42 % 48 km/h 0.0 mm High 24
21 Oct 33.0 °C 41 % 45 km/h 0.1 mm High 26
22 Oct 34.5 °C 34 % 46 km/h 0.4 mm High 29
23 Oct 31.8 °C 45 % 35 km/h 2.7 mm Low 10
24 Oct 33.1 °C 42 % 35 km/h 1.4 mm Moderate 16
25 Oct 34.1 °C 40 % 39 km/h 0.0 mm High 26
26 Oct 35.6 °C 36 % 38 km/h 0.2 mm High 28

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 14 Sept 2026
After · 25 Oct 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 1 October 2026 the air beside the fire reached 20 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak20 µg/m³
Days over the guideline0 days
PM1023 µg/m³
Optical depth0.34
26272829301234
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1,684Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia ›

Frequently asked questions

How long did the Cook fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 21 September 2026 to 26 October 2026 (36 days). The perimeter dates it from 28 September 2026 to 25 October 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 37,441 hectares (374.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Cook (37,984 ha, 0.4 %).
Is the Cook fire still active?
Yes: satellites detected fire on 26 Oct 2026, 14:59 UTC. Check the emergency service for the official status.
What was the weather like?
During the fire the temperature reached 35.6 °C, humidity dropped to 30 % and gusts hit 53 km/h. The fire danger index (FWI) reached 39, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings ›

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 36,515 → 37,441 ha.
  2. Start date: 24 September 2026 → 21 September 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 28 September 2026 to 25 October 2026. 1,684 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.