Skip to content
worldfires
AU · Australia · →

Cook fire, 26 July 2025 Cook

Out · last detection 18 Aug 2025, 15:23 UTC

The fire started on 26 July 2025 in Cook, Australia, and satellites saw it burning for 24 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 14,856 hectares from heat detections, spread across a single municipality.

It is the 460th largest in Queensland since 2016 (of 1737 with a page). Number 302 in Australia in 2025, of 1124.

Compare with…
Burnt area
14,856ha
GWIS perimeter (Copernicus)
Duration
24days
26 Jul 2025 – 18 Aug 2025
Municipalities hit
1
local government areas
Started on
26 Jul
2025
Heat detections
480
in a single hotspot: 111 MW
Danger at start
23
High · FWI index
Average daily power
85MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 26 Jul18 Aug
18 Aug 2025

How it evolved, day by day

26 Jul 2025 · 19 MW · 10 27 Jul 2025 · 119 MW · 16 28 Jul 2025 · 195 MW · 45 29 Jul 2025 · 120 MW · 18 30 Jul 2025 · 33 MW · 18 31 Jul 2025 · 25 MW · 19 1 Aug 2025 · 16 MW · 3 2 Aug 2025 · 10 MW · 4 3 Aug 2025 · 15 MW · 4 4 Aug 2025 · 37 MW · 10 5 Aug 2025 · 72 MW · 15 6 Aug 2025 · 82 MW · 31 7 Aug 2025 · 134 MW · 34 8 Aug 2025 · 102 MW · 27 9 Aug 2025 · 60 MW · 13 11 Aug 2025 · 48 MW · 25 12 Aug 2025 · 220 MW · 17 13 Aug 2025 · 20 MW · 13 14 Aug 2025 · 123 MW · 22 15 Aug 2025 · 279 MW · 74 16 Aug 2025 · 43 MW · 17 17 Aug 2025 · 184 MW · 23 18 Aug 2025 · 8 MW · 4
26 Jul 30 Jul 3 Aug 7 Aug 12 Aug 15 Aug 16 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
53km/h · peak gust
30%lowest humidity

It had gone 8 days without rain (1 mm or more) when it started.

This area had burned before

99% of the perimeter overlaps earlier fires recorded since 2016: 5,121 ha in 2016, 4,076 ha in 2017, 5,072 ha in 2018, 1,037 ha in 2019, 10,505 ha in 2020, 499 ha in 2021, 8,900 ha in 2022, 11,501 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 14,670 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 9.4% of the area of London (149 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Cook where it started
    14,924 ha reached on 22 Jul
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
19 Jul 30.9 °C 54 % 28 km/h 0.4 mm High 23
20 Jul 31.4 °C 49 % 23 km/h 0.0 mm Moderate 21
21 Jul 31.8 °C 53 % 30 km/h 0.7 mm Moderate 20
22 Jul 32.0 °C 55 % 31 km/h 1.6 mm Moderate 12
23 Jul 31.8 °C 55 % 32 km/h 0.7 mm Moderate 17
24 Jul 31.8 °C 51 % 42 km/h 0.0 mm High 24
25 Jul 32.5 °C 45 % 52 km/h 0.0 mm High 32
26 Jul 33.2 °C 44 % 44 km/h 0.0 mm High 29
27 Jul 32.6 °C 45 % 34 km/h 0.0 mm High 26
28 Jul 32.6 °C 45 % 32 km/h 0.0 mm High 26
29 Jul 33.4 °C 43 % 38 km/h 0.0 mm High 30
30 Jul 33.0 °C 44 % 31 km/h 0.0 mm High 27
31 Jul 33.1 °C 43 % 32 km/h 0.0 mm High 28
1 Aug 31.9 °C 47 % 29 km/h 0.0 mm High 26
2 Aug 30.4 °C 39 % 37 km/h 0.0 mm High 29
3 Aug 29.5 °C 47 % 36 km/h 0.0 mm High 29
4 Aug 30.6 °C 40 % 35 km/h 0.0 mm High 30
5 Aug 31.7 °C 36 % 34 km/h 0.0 mm High 32
6 Aug 31.5 °C 41 % 39 km/h 0.0 mm High 32
7 Aug 31.3 °C 45 % 46 km/h 0.1 mm High 35
8 Aug 31.1 °C 42 % 45 km/h 0.0 mm High 35
9 Aug 31.5 °C 42 % 33 km/h 0.0 mm High 28
10 Aug 31.1 °C 41 % 22 km/h 0.0 mm High 26
11 Aug 32.0 °C 41 % 42 km/h 0.0 mm High 34
12 Aug 31.3 °C 39 % 46 km/h 0.0 mm High 36
13 Aug 28.7 °C 57 % 48 km/h 0.4 mm High 30
14 Aug 31.0 °C 44 % 53 km/h 0.0 mm High 33
15 Aug 30.8 °C 34 % 41 km/h 0.0 mm High 34
16 Aug 30.7 °C 35 % 39 km/h 0.0 mm High 34
17 Aug 30.9 °C 30 % 38 km/h 0.0 mm High 37
18 Aug 31.8 °C 33 % 40 km/h 0.0 mm Very high 39
19 Aug after 31.1 °C 36 % 40 km/h 0.0 mm High 36
20 Aug after 32.1 °C 44 % 40 km/h 0.0 mm High 34
21 Aug after 30.3 °C 55 % 52 km/h 0.4 mm High 32
22 Aug after 31.4 °C 49 % 51 km/h 0.0 mm High 34
23 Aug after 33.8 °C 33 % 48 km/h 0.0 mm Very high 38
24 Aug after 34.6 °C 25 % 43 km/h 0.0 mm Very high 42
25 Aug after 32.5 °C 42 % 46 km/h 0.0 mm Very high 38
26 Aug after 32.7 °C 33 % 42 km/h 0.0 mm High 37
27 Aug after 33.4 °C 35 % 33 km/h 0.0 mm High 36
28 Aug after 33.5 °C 37 % 28 km/h 0.0 mm High 33

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 19 Jul 2025
After · 25 Aug 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 28 July 2025 the air beside the fire reached 24 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak24 µg/m³
Days over the guideline0 days
PM1026 µg/m³
Optical depth0.40
2425262728293031123456789101112131415161718192021
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 480Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia ›

Frequently asked questions

How long did the Cook fire last?
GWIS (Copernicus) dates it between 26 July 2025 and 18 August 2025: 24 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 14,856 hectares (148.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Cook (14,924 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 33.4 °C, humidity dropped to 30 % and gusts hit 53 km/h. The fire danger index (FWI) reached 39, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings ›

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

No changes since 24 October 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 480 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.