Cook fire, 13 October 2025 Cook
The fire started on 13 October 2025 in Cook, Australia, and satellites saw it burning for 29 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 70,397 hectares from heat detections, spread across a single municipality.
It is the 62th largest in Queensland since 2016 (of 1737 with a page). Number 41 in Australia in 2025, of 1124.
Compare with…
Suggestions: Cook · 2023Cook · 2023Cook · 2021Cook · 2018
- Burnt area
- 70,397ha
- GWIS perimeter (Copernicus)
- Duration
- 29days
- 13 Oct 2025 – 10 Nov 2025
- Municipalities hit
- 1
- local government areas
- Started on
- 13 Oct
- 2025
- Heat detections
- 1,889
- in a single hotspot: 358 MW
- Danger at start
- 9
- Low · FWI index
- Average daily power
- 924MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 4 days without rain (1 mm or more) when it started. Rain came after the fire: 14.6 mm on 11 Nov.
This area had burned before
91% of the perimeter overlaps earlier fires recorded since 2016: 21,234 ha in 2016, 2,769 ha in 2017, 13,993 ha in 2018, 16,325 ha in 2019, 7,956 ha in 2020, 13,074 ha in 2021, 10,092 ha in 2022, 38,647 ha in 2023, 885 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 63,912 ha that had burned before.
- 21,771 ha Cook fire, October 2023 30,313 ha in total; the hectares shown are those it shares with this fire
- 10,110 ha Cook fire, October 2023 113,118 ha in total; the hectares shown are those it shares with this fire
- 6,853 ha Cook fire, October 2021 9,028 ha in total; the hectares shown are those it shares with this fire
- 5,341 ha Cook fire, September 2018 54,407 ha in total; the hectares shown are those it shares with this fire
- 3,869 ha Cook fire, November 2016 12,646 ha in total; the hectares shown are those it shares with this fire
- 1,650 ha Cook fire, November 2023 8,672 ha in total; the hectares shown are those it shares with this fire
- 287 ha Cook fire, September 2023 46,995 ha in total; the hectares shown are those it shares with this fire
- 35 ha Cook fire, July 2022 25,681 ha in total; the hectares shown are those it shares with this fire
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Cook where it started70,777 ha reached on 13 Oct0.7 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2025Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 13 Oct | 34.3 °C | 44 % | 47 km/h | 10.3 mm | Low 9 |
| 14 Oct | 34.2 °C | 43 % | 49 km/h | 0.6 mm | High 26 |
| 15 Oct | 33.7 °C | 38 % | 53 km/h | 0.0 mm | High 33 |
| 16 Oct | 33.5 °C | 46 % | 61 km/h | 1.5 mm | High 26 |
| 17 Oct | 33.7 °C | 40 % | 54 km/h | 0.0 mm | High 33 |
| 18 Oct | 34.1 °C | 35 % | 47 km/h | 0.0 mm | High 34 |
| 19 Oct | 35.2 °C | 27 % | 43 km/h | 0.0 mm | High 38 |
| 20 Oct | 34.7 °C | 30 % | 48 km/h | 0.0 mm | Very high 40 |
| 21 Oct | 33.9 °C | 27 % | 47 km/h | 0.0 mm | Very high 40 |
| 22 Oct | 35.1 °C | 28 % | 35 km/h | 0.0 mm | High 37 |
| 23 Oct | 35.7 °C | 27 % | 38 km/h | 0.0 mm | Very high 38 |
| 24 Oct | 35.9 °C | 29 % | 40 km/h | 0.0 mm | Very high 40 |
| 25 Oct | 36.8 °C | 27 % | 40 km/h | 0.0 mm | Very high 41 |
| 26 Oct | 36.5 °C | 37 % | 39 km/h | 0.0 mm | Very high 40 |
| 27 Oct | 38.5 °C | 24 % | 36 km/h | 0.0 mm | Very high 43 |
| 28 Oct | 38.4 °C | 28 % | 37 km/h | 0.0 mm | Very high 45 |
| 29 Oct | 37.2 °C | 35 % | 42 km/h | 1.4 mm | High 31 |
| 30 Oct | 36.3 °C | 39 % | 35 km/h | 1.7 mm | Moderate 19 |
| 31 Oct | 36.6 °C | 33 % | 35 km/h | 0.1 mm | High 34 |
| 1 Nov | 36.5 °C | 31 % | 41 km/h | 0.0 mm | Very high 39 |
| 2 Nov | 36.6 °C | 35 % | 44 km/h | 0.0 mm | Very high 39 |
| 3 Nov | 37.3 °C | 32 % | 36 km/h | 0.0 mm | High 36 |
| 4 Nov | 36.4 °C | 36 % | 43 km/h | 0.0 mm | Very high 39 |
| 5 Nov | 36.5 °C | 31 % | 46 km/h | 0.0 mm | Very high 42 |
| 6 Nov | 36.6 °C | 30 % | 44 km/h | 0.1 mm | Very high 40 |
| 7 Nov | 35.9 °C | 32 % | 44 km/h | 0.0 mm | Very high 41 |
| 8 Nov | 36.2 °C | 30 % | 36 km/h | 0.1 mm | Very high 39 |
| 9 Nov | 36.5 °C | 29 % | 38 km/h | 0.0 mm | Very high 41 |
| 10 Nov | 38.5 °C | 27 % | 37 km/h | 0.5 mm | Very high 44 |
| 11 Nov after | 37.2 °C | 34 % | 40 km/h | 14.6 mm | Low 11 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 22 October 2025 the air beside the fire reached 24 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 1,889Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Cook fire last?
- GWIS (Copernicus) dates it between 13 October 2025 and 10 November 2025: 29 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 70,397 hectares (704.0 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Cook (70,777 ha, 0.7 %).
- What was the weather like?
- During the fire the temperature reached 38.5 °C, humidity dropped to 24 % and gusts hit 61 km/h. The fire danger index (FWI) reached 45, class Very high.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 000 · Emergency number and official warnings ›
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 1,889 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.