Concepción fire, 26 August 2024 Concepción
The fire started on 26 August 2024 in Concepción, Bolivia, and satellites saw it burning for 18 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,829 hectares from heat detections, spread across a single municipality.
It is the 459th largest in Santa Cruz since 2016 (of 834 with a page). Number 173 in Bolivia in 2024, of 295.
Compare with…
- Burnt area
- 4,829ha
- GWIS perimeter (Copernicus)
- Duration
- 18days
- 26 Aug 2024 – 12 Sept 2024
- Municipalities hit
- 1
- municipalities
- Started on
- 26 Aug
- 2024
- Heat detections
- 675
- in a single hotspot: 41 MW
- Danger at start
- 24
- High · FWI index
- Average daily power
- 225MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 16 days without rain (1 mm or more) when it started. Rain came after the fire: 1.6 mm on 14 Sept.
This area had burned before
99% of the perimeter overlaps earlier fires recorded since 2016: 3,264 ha in 2016, 4,348 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 4,767 ha that had burned before.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
4,882 ha0.2 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 26 Aug | 25.1 °C | 28 % | 32 km/h | 0.0 mm | High 24 |
| 27 Aug | 29.7 °C | 29 % | 24 km/h | 0.0 mm | High 22 |
| 28 Aug | 32.9 °C | 27 % | 30 km/h | 0.0 mm | High 28 |
| 29 Aug | 36.0 °C | 24 % | 37 km/h | 0.0 mm | High 34 |
| 30 Aug | 33.7 °C | 32 % | 35 km/h | 0.0 mm | High 34 |
| 31 Aug | 31.8 °C | 35 % | 28 km/h | 0.0 mm | High 32 |
| 1 Sept | 26.4 °C | 37 % | 44 km/h | 0.0 mm | High 32 |
| 2 Sept | 34.3 °C | 28 % | 31 km/h | 0.0 mm | High 31 |
| 3 Sept | 35.0 °C | 27 % | 53 km/h | 0.0 mm | Very high 41 |
| 4 Sept | 34.0 °C | 33 % | 42 km/h | 0.0 mm | High 36 |
| 5 Sept | 27.3 °C | 35 % | 57 km/h | 0.0 mm | Very high 40 |
| 6 Sept | 32.1 °C | 30 % | 35 km/h | 0.0 mm | High 32 |
| 7 Sept | 34.5 °C | 21 % | 49 km/h | 0.0 mm | Very high 44 |
| 8 Sept | 36.0 °C | 26 % | 40 km/h | 0.0 mm | Very high 39 |
| 9 Sept | 36.8 °C | 27 % | 37 km/h | 0.0 mm | Very high 39 |
| 10 Sept | 36.2 °C | 29 % | 43 km/h | 0.0 mm | Very high 42 |
| 11 Sept | 35.5 °C | 33 % | 59 km/h | 0.0 mm | Very high 49 |
| 12 Sept | 30.1 °C | 51 % | 40 km/h | 1.6 mm | Moderate 12 |
| 13 Sept after | 34.9 °C | 37 % | 51 km/h | 0.0 mm | High 32 |
| 14 Sept after | 26.0 °C | 65 % | 52 km/h | 1.6 mm | Low 11 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 7 September 2024 the air beside the fire reached 1,676 µg/m³ of PM2.5. That day averaged 977: 65 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 675Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Concepción fire last?
- GWIS (Copernicus) dates it between 26 August 2024 and 12 September 2024: 18 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,829 hectares (48.3 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Concepción (4,882 ha, 0.2 %).
- What was the weather like?
- During the fire the temperature reached 36.8 °C, humidity dropped to 21 % and gusts hit 59 km/h. The fire danger index (FWI) reached 49, class Very high.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 119 · 110 · Emergency number and official warnings ›
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 675 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.