Skip to content
worldfires
BR · Brazil · →

Colniza fire, 20 August 2024 Colniza

Out · last detection 25 Sept 2024, 18:18 UTC

The fire started on 20 August 2024 in Colniza, Brazil, and satellites saw it burning for 37 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 16,583 hectares from heat detections, spread across a single municipality.

It is the 236th largest in Mato Grosso since 2016 (of 1996 with a page). Number 175 in Brazil in 2024, of 1301.

Compare with…
Burnt area
16,583ha
GWIS perimeter (Copernicus)
Duration
37days
20 Aug 2024 – 25 Sept 2024
Municipalities hit
1
municipalities
Started on
20 Aug
2024
Heat detections
1,441
in a single hotspot: 419 MW
Danger at start
32
High · FWI index
Average daily power
656MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 20 Aug25 Sept
25 Sept 2024

How it evolved, day by day

20 Aug 2024 · 15 MW · 9 21 Aug 2024 · 22 MW · 6 22 Aug 2024 · 14 MW · 1 25 Aug 2024 · 144 MW · 7 26 Aug 2024 · 124 MW · 27 27 Aug 2024 · 356 MW · 21 28 Aug 2024 · 286 MW · 32 29 Aug 2024 · 46 MW · 9 30 Aug 2024 · 107 MW · 10 31 Aug 2024 · 644 MW · 37 1 Sept 2024 · 4,322 MW · 64 2 Sept 2024 · 852 MW · 133 3 Sept 2024 · 114 MW · 46 4 Sept 2024 · 972 MW · 57 5 Sept 2024 · 7,398 MW · 163 6 Sept 2024 · 2,922 MW · 323 7 Sept 2024 · 304 MW · 95 8 Sept 2024 · 166 MW · 36 9 Sept 2024 · 1,038 MW · 71 10 Sept 2024 · 137 MW · 45 11 Sept 2024 · 347 MW · 18 12 Sept 2024 · 558 MW · 20 13 Sept 2024 · 434 MW · 36 14 Sept 2024 · 32 MW · 8 15 Sept 2024 · 28 MW · 23 16 Sept 2024 · 189 MW · 54 17 Sept 2024 · 12 MW · 6 18 Sept 2024 · 69 MW · 14 19 Sept 2024 · 7 MW · 1 20 Sept 2024 · 82 MW · 6 21 Sept 2024 · 196 MW · 11 22 Sept 2024 · 235 MW · 34 23 Sept 2024 · 23 MW · 8 25 Sept 2024 · 93 MW · 10
20 Aug 27 Aug 1 Sept 5 Sept 6 Sept 11 Sept 16 Sept 21 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
36km/h · peak gust
23%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 6.4 mm on 27 Sept.

This area had burned before

89% of the perimeter overlaps earlier fires recorded since 2016: 213 ha in 2016, 6,006 ha in 2017, 4,765 ha in 2018, 7,973 ha in 2019, 12,952 ha in 2020, 7,692 ha in 2021, 16,662 ha in 2022, 5,941 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 14,764 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 10% of the area of London (166 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Colniza where it started
    16,671 ha reached on 20 Aug
    0.6 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
20 Aug 35.8 °C 33 % 25 km/h 0.0 mm High 32
21 Aug 36.3 °C 28 % 30 km/h 0.0 mm High 35
22 Aug 36.7 °C 30 % 27 km/h 0.0 mm High 34
23 Aug 38.0 °C 24 % 23 km/h 0.0 mm High 36
24 Aug 35.7 °C 33 % 23 km/h 0.2 mm High 36
25 Aug 34.3 °C 32 % 34 km/h 0.0 mm Very high 40
26 Aug 31.2 °C 35 % 36 km/h 0.0 mm High 37
27 Aug 34.7 °C 28 % 24 km/h 0.0 mm High 32
28 Aug 35.9 °C 26 % 27 km/h 0.0 mm High 34
29 Aug 35.5 °C 29 % 22 km/h 0.0 mm High 35
30 Aug 36.4 °C 26 % 34 km/h 0.0 mm Very high 38
31 Aug 37.0 °C 26 % 23 km/h 0.0 mm High 34
1 Sept 37.5 °C 26 % 31 km/h 0.0 mm High 36
2 Sept 37.5 °C 26 % 18 km/h 0.0 mm High 34
3 Sept 35.6 °C 34 % 26 km/h 0.0 mm High 36
4 Sept 35.8 °C 36 % 26 km/h 0.0 mm High 35
5 Sept 38.2 °C 23 % 31 km/h 0.0 mm Very high 39
6 Sept 36.4 °C 27 % 22 km/h 0.0 mm Very high 38
7 Sept 34.3 °C 32 % 24 km/h 0.0 mm High 35
8 Sept 36.3 °C 30 % 24 km/h 0.0 mm High 35
9 Sept 37.0 °C 28 % 18 km/h 0.0 mm High 37
10 Sept 35.6 °C 36 % 27 km/h 0.0 mm High 36
11 Sept 35.5 °C 42 % 34 km/h 0.4 mm High 32
12 Sept 36.3 °C 35 % 30 km/h 0.0 mm High 32
13 Sept 37.2 °C 31 % 24 km/h 0.0 mm High 32
14 Sept 37.0 °C 32 % 22 km/h 0.0 mm High 32
15 Sept 34.9 °C 40 % 26 km/h 0.0 mm High 31
16 Sept 35.2 °C 39 % 25 km/h 0.3 mm High 30
17 Sept 36.7 °C 33 % 27 km/h 0.0 mm High 32
18 Sept 36.2 °C 31 % 25 km/h 0.0 mm High 32
19 Sept 33.6 °C 48 % 31 km/h 3.7 mm Low 8
20 Sept 37.0 °C 33 % 34 km/h 0.0 mm High 26
21 Sept 36.7 °C 35 % 20 km/h 0.0 mm High 28
22 Sept 37.1 °C 30 % 20 km/h 0.0 mm High 31
23 Sept 37.9 °C 31 % 24 km/h 0.0 mm High 31
24 Sept 35.1 °C 39 % 25 km/h 0.2 mm High 31
25 Sept 36.7 °C 37 % 27 km/h 0.5 mm High 30
26 Sept after 34.8 °C 41 % 21 km/h 0.5 mm High 32
27 Sept after 28.8 °C 66 % 26 km/h 6.4 mm Very low 3

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 13 Aug 2024
After · 2 Oct 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 7 September 2024 the air beside the fire reached 574 µg/m³ of PM2.5. That day averaged 418: 28 times the WHO daily guideline (15).

PM2.5 peak574 µg/m³
Days over the guideline44 days
PM10823 µg/m³
Optical depth4.78
1617181920212223242526272829303112345678910111213141516171819202122232425262728
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1,441Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil ›

Frequently asked questions

How long did the Colniza fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 20 August 2024 to 25 September 2024 (37 days). The perimeter dates it from 25 August 2024 to 18 September 2024.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 16,583 hectares (165.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Colniza (16,671 ha, 0.6 %).
What was the weather like?
During the fire the temperature reached 38.2 °C, humidity dropped to 23 % and gusts hit 36 km/h. The fire danger index (FWI) reached 40, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings ›

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 18 September 2024 → 25 September 2024.
  2. Start date: 25 August 2024 → 20 August 2024.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 25 August 2024 to 18 September 2024. 1,441 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.