Skip to content
worldfires
AU · Australia · –

Central Highlands (Qld) fire, September 2025 Central Highlands (Qld)

Out · last detection 4 Oct 2025, 15:46 UTC

The fire started on 23 September 2025 in Central Highlands (Qld), Australia, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 7,876 hectares from heat detections, spread across a single municipality.

It is the 129th largest in Queensland since 2016 (of 227 with a page). Number 22 in Australia in 2025, of 49.

Burnt area
7,876ha
GWIS perimeter (Copernicus)
Duration
13days
23 Sept 2025 – 5 Oct 2025
Municipalities hit
1
local government areas
Started on
23 Sept
2025
Heat detections
325
in a single hotspot: 180 MW
Danger at start
39
Very high · FWI index
Average daily power
544MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 23 Sept5 Oct
4 Oct 2025

How it evolved, day by day

23 Sept 2025 · 2,532 MW · 63 24 Sept 2025 · 922 MW · 34 25 Sept 2025 · 1,169 MW · 50 26 Sept 2025 · 78 MW · 15 27 Sept 2025 · 45 MW · 7 28 Sept 2025 · 9 MW · 3 29 Sept 2025 · 5 MW · 2 30 Sept 2025 · 573 MW · 20 1 Oct 2025 · 5 MW · 5 2 Oct 2025 · 998 MW · 100 3 Oct 2025 · 117 MW · 13 4 Oct 2025 · 73 MW · 13
23 Sept 26 Sept 29 Sept 2 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
44km/h · peak gust
13%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started.

This area had burned before

85% of the perimeter overlaps earlier fires recorded since 2016: 1,709 ha in 2016, 455 ha in 2017, 1,366 ha in 2018, 39 ha in 2020, 605 ha in 2021, 2,148 ha in 2022, 5,280 ha in 2023, 631 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 6,707 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 5% of the area of London (79 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Central Highlands (Qld) where it started
    7,926 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.84 ha
Residents< 20

Inside the perimeter there were about 0.84 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
23 Sept 27.5 °C 15 % 44 km/h 0.0 mm Very high 39
24 Sept 26.6 °C 20 % 30 km/h 0.0 mm High 31
25 Sept 28.0 °C 16 % 33 km/h 0.0 mm Very high 41
26 Sept 30.2 °C 19 % 30 km/h 0.0 mm High 36
27 Sept 29.8 °C 24 % 36 km/h 0.0 mm Very high 43
28 Sept 32.8 °C 20 % 26 km/h 0.0 mm High 32
29 Sept 33.9 °C 19 % 25 km/h 0.0 mm Very high 41
30 Sept 34.2 °C 20 % 31 km/h 0.0 mm Very high 39
1 Oct 34.7 °C 26 % 32 km/h 0.0 mm Very high 39
2 Oct 36.9 °C 18 % 41 km/h 0.1 mm Very high 40
3 Oct 30.0 °C 14 % 44 km/h 0.0 mm Extreme 56
4 Oct 31.2 °C 13 % 36 km/h 0.0 mm Extreme 53
5 Oct 30.3 °C 24 % 35 km/h 0.0 mm Very high 48
6 Oct after 32.7 °C 17 % 27 km/h 0.0 mm Very high 39
7 Oct after 34.1 °C 17 % 29 km/h 0.0 mm Very high 42
8 Oct after 33.8 °C 21 % 35 km/h 0.0 mm Very high 45
9 Oct after 34.5 °C 31 % 36 km/h 0.0 mm Very high 41
10 Oct after 33.8 °C 32 % 32 km/h 0.0 mm Very high 42
11 Oct after 35.1 °C 32 % 26 km/h 0.0 mm High 37
12 Oct after 35.6 °C 34 % 31 km/h 0.0 mm Very high 39
13 Oct after 30.6 °C 46 % 29 km/h 0.8 mm High 24
14 Oct after 34.8 °C 31 % 35 km/h 0.2 mm High 34
15 Oct after 31.6 °C 40 % 40 km/h 0.0 mm High 36

Its twins: fires that started in the same weather

It started with an FWI of 39.3, a minimum humidity of 15% and rain the day before. Fires in the area that started in weather like this since 2016: 30.

FWI at the start 39.3
Minimum humidity 15 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Banana fire, August 2017
16,717 ha 24 days FWI 36.2 Min. humidity 16 % 120 km away, in 2017

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

17 days
median duration
14,314 ha
median area
60 %
went past 10,000 ha
1.9 mm
rain at the end (median; 19 of 30 had it)

It stayed below its twins: 7,876 ha against a median of 14,314 ha. It lasted 13 days, against 17 days.

In 11 of 30, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.9 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
44km/h · max. gust

It was considered over on 5 Oct, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 19 of 30, with a median of 1.9 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 16 Sept 2025
After · 12 Oct 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 26 September 2025 the air beside the fire reached 68 µg/m³ of PM2.5. That day averaged 30: 2.0 times the WHO daily guideline (15).

PM2.5 peak68 µg/m³
Days over the guideline4 days
PM1070 µg/m³
Optical depth0.49
21 Sept25 Sept29 Sept3 Oct7 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 325Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Central Highlands (Qld) fire last?
GWIS (Copernicus) dates it between 23 September 2025 and 5 October 2025: 13 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 7,876 hectares (78.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Central Highlands (Qld) (7,926 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 36.9 °C, humidity dropped to 13 % and gusts hit 44 km/h. The fire danger index (FWI) reached 56, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 30. Their median duration was 17 days and their median area 14,314 ha; 60 % went past 10,000 ha. In 11 of 30, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.9 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 325 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.