Skip to content
worldfires
AU · Australia · –

Central Highlands (Qld) fire, November 2019 Central Highlands (Qld)

Out · last detection 14 Dec 2019, 15:11 UTC

The fire started on 29 November 2019 in Central Highlands (Qld), Australia, and satellites saw it burning for 16 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 9,679 hectares from heat detections, spread across a single municipality.

It is the 97th largest in Queensland since 2016 (of 227 with a page). Number 156 in Australia in 2019, of 288.

Burnt area
9,679ha
GWIS perimeter (Copernicus)
Duration
16days
29 Nov 2019 – 14 Dec 2019
Municipalities hit
1
local government areas
Started on
29 Nov
2019
Heat detections
333
in a single hotspot: 110 MW
Danger at start
38
High · FWI index
Average daily power
139MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 29 Nov14 Dec
14 Dec 2019

How it evolved, day by day

29 Nov 2019 · 2 MW · 2 30 Nov 2019 · 116 MW · 21 2 Dec 2019 · 255 MW · 83 3 Dec 2019 · 363 MW · 45 4 Dec 2019 · 97 MW · 20 5 Dec 2019 · 75 MW · 16 6 Dec 2019 · 177 MW · 33 7 Dec 2019 · 532 MW · 80 9 Dec 2019 · 117 MW · 22 10 Dec 2019 · 20 MW · 3 11 Dec 2019 · 5 MW · 1 13 Dec 2019 · 17 MW · 2 14 Dec 2019 · 29 MW · 5
29 Nov 3 Dec 7 Dec 14 Dec

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
47km/h · peak gust
3%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 1.1 mm on 24 Dec.

This area had burned before

43% of the perimeter overlaps earlier fires recorded since 2016: 4,094 ha in 2016, 1 ha in 2017, 156 ha in 2018.

How big is it?

10 km
It burned the equivalent of 6.1% of the area of London (97 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Central Highlands (Qld) where it started
    9,760 ha reached on 29 Nov
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
29 Nov 32.7 °C 19 % 33 km/h 0.0 mm High 38
30 Nov 33.6 °C 19 % 35 km/h 0.0 mm Very high 43
1 Dec 30.2 °C 30 % 47 km/h 0.0 mm Very high 47
2 Dec 32.0 °C 12 % 47 km/h 0.0 mm Extreme 64
3 Dec 32.9 °C 12 % 34 km/h 0.0 mm Very high 43
4 Dec 34.4 °C 9 % 34 km/h 0.0 mm Very high 44
5 Dec 35.2 °C 3 % 36 km/h 0.0 mm Extreme 52
6 Dec 36.7 °C 7 % 35 km/h 0.0 mm Extreme 55
7 Dec 37.8 °C 7 % 27 km/h 0.0 mm Extreme 51
8 Dec 36.5 °C 16 % 39 km/h 0.0 mm Extreme 60
9 Dec 34.5 °C 17 % 38 km/h 0.0 mm Extreme 58
10 Dec 35.1 °C 13 % 39 km/h 0.0 mm Extreme 57
11 Dec 36.5 °C 15 % 31 km/h 0.0 mm Very high 48
12 Dec 36.8 °C 11 % 31 km/h 0.0 mm Very high 49
13 Dec 37.4 °C 8 % 37 km/h 0.0 mm Very high 44
14 Dec 36.3 °C 10 % 28 km/h 0.0 mm Extreme 51
15 Dec after 36.7 °C 13 % 26 km/h 0.0 mm Extreme 55
16 Dec after 39.8 °C 7 % 27 km/h 0.0 mm Very high 49
17 Dec after 36.0 °C 17 % 46 km/h 0.0 mm Extreme 51
18 Dec after 33.1 °C 21 % 45 km/h 0.0 mm Extreme 56
19 Dec after 33.0 °C 15 % 39 km/h 0.0 mm Extreme 50
20 Dec after 35.2 °C 14 % 46 km/h 0.0 mm Extreme 57
21 Dec after 35.5 °C 14 % 40 km/h 0.0 mm Extreme 53
22 Dec after 38.0 °C 14 % 44 km/h 0.0 mm Very high 47
23 Dec after 35.5 °C 19 % 33 km/h 0.0 mm Very high 42
24 Dec after 37.0 °C 24 % 38 km/h 1.1 mm Very high 44

Its twins: fires that started in the same weather

It started with an FWI of 37.8, a minimum humidity of 19% and 1 day without rain. Fires in the area that started in weather like this since 2016: 24.

FWI at the start 37.8
Minimum humidity 19 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Central Highlands (Qld) fire, January 2025
6,140 ha 6 days FWI 37.1 Min. humidity 20 % 79 km away, in 2025

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

19 days
median duration
15,275 ha
median area
71 %
went past 10,000 ha
3.6 mm
rain at the end (median; 18 of 24 had it)

It stayed below its twins: 9,679 ha against a median of 15,275 ha. It lasted 16 days, against 19 days.

In 6 of 24, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.1 mmfirst rain
24 Dec10 days after it ended
47km/h · max. gust

It was considered over on 14 Dec, and on 24 Dec 1.1 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 18 of 24, with a median of 3.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 22 Nov 2019
After · 21 Dec 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 333Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Central Highlands (Qld) fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 29 November 2019 to 14 December 2019 (16 days). The perimeter dates it from 29 November 2019 to 11 December 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 9,679 hectares (96.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Central Highlands (Qld) (9,760 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 37.8 °C, humidity dropped to 3 % and gusts hit 47 km/h. The fire danger index (FWI) reached 64, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 24. Their median duration was 19 days and their median area 15,275 ha; 71 % went past 10,000 ha. In 6 of 24, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 11 December 2019 → 14 December 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 29 November 2019 to 11 December 2019. 333 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.