Skip to content
worldfires
AU · Australia · –

Central Highlands (Qld) fire, 21 December 2024 Central Highlands (Qld)

Out · last detection

The fire started on in Central Highlands (Qld), Australia, and satellites saw it burning for 7 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,977 hectares from heat detections, spread across a single municipality.

It is number 155 by size of the 227 fires with a page that started in Queensland since 2016. Number 25 in Australia in 2024, of 39.

Burnt area
6,977ha
GWIS perimeter (Copernicus)
Duration
7days
21 Dec 2024 – 27 Dec 2024
Municipalities hit
1
local government areas
Started on
21 Dec
2024
Heat detections
368
in a single hotspot: 76 MW
Danger at start
16
Moderate · FWI index
Average daily power
330MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 21 Dec27 Dec
27 Dec 2024

How it evolved, day by day

21 Dec 2024 · 1 MW · 1 22 Dec 2024 · 206 MW · 32 23 Dec 2024 · 622 MW · 43 24 Dec 2024 · 377 MW · 110 25 Dec 2024 · 439 MW · 53 26 Dec 2024 · 227 MW · 76 27 Dec 2024 · 442 MW · 53
21 Dec 23 Dec 25 Dec 27 Dec

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
43km/h · peak gust
18%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 1.6 mm on 28 Dec.

This area had burned before

2% of the perimeter overlaps earlier fires recorded since 2016: 142 ha in 2018.

How big is it?

10 km
It burned the equivalent of 4.4% of the area of London (70 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Central Highlands (Qld) where it started
    7,017 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
21 Dec 32.4 °C 29 % 38 km/h 0.0 mm Moderate 16
22 Dec 35.2 °C 24 % 30 km/h 0.0 mm Moderate 18
23 Dec 36.8 °C 22 % 29 km/h 0.0 mm Moderate 20
24 Dec 35.6 °C 18 % 31 km/h 0.0 mm High 25
25 Dec 34.2 °C 31 % 43 km/h 0.1 mm High 29
26 Dec 33.4 °C 38 % 42 km/h 0.0 mm High 25
27 Dec 35.8 °C 33 % 38 km/h 0.0 mm High 24
28 Dec after 36.9 °C 33 % 27 km/h 1.6 mm High 22

Its twins: fires that started in the same weather

It started with an FWI of 15.6, a minimum humidity of 29% and 1 day without rain. Fires in the area that started in weather like this since 2016: 17.

FWI at the start 15.6
Minimum humidity 29 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Carnarvon National Park Fire, November 2017
11,575 ha 14 days FWI 15.8 Min. humidity 24 % 85 km away, in 2017

First rain (1 mm or more) after it ended: 3.8 mm on 18 Nov.

What happened to them

15 days
median duration
10,022 ha
median area
53 %
went past 10,000 ha
5.3 mm
rain at the end (median; 15 of 17 had it)

It burned an area similar to its twins (6,977 ha against a median of 10,022 ha) and lasted 7 days, against 15 days.

In 2 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.6 mmfirst rain
28 Decthe day after it ended
43km/h · max. gust

It was considered over on 27 Dec, and on 28 Dec 1.6 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 15 of 17, with a median of 5.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 14 Dec 2024
After · 3 Jan 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 25 December 2024 the air beside the fire reached 18 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak18 µg/m³
Days over the guideline0 days
PM1021 µg/m³
Optical depth0.38
19 Dec22 Dec25 Dec28 Dec
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 368Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Central Highlands (Qld) fire last?
GWIS (Copernicus) dates it between 21 December 2024 and 27 December 2024: 7 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,977 hectares (69.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Central Highlands (Qld) (7,017 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 36.8 °C, humidity dropped to 18 % and gusts hit 43 km/h. The fire danger index (FWI) reached 29, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 17. Their median duration was 15 days and their median area 10,022 ha; 53 % went past 10,000 ha. In 2 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 368 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.