Skip to content
worldfires
AU · Australia · –

Central Highlands (Qld) fire, 8 September 2023 Central Highlands (Qld), Maranoa, Murweh

Out · last detection 4 Nov 2023, 16:09 UTC

The fire started on 8 September 2023 in Central Highlands (Qld), Australia, and satellites saw it burning for 58 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 337,497 hectares from heat detections, spread across 3 municipalities.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

Other fire pages in the same area and on the same dates:

It is the largest fire in Queensland since 2016 (of 227 with a page). The largest in Australia in 2023, of 157.

Burnt area
337,497ha
GWIS perimeter (Copernicus)
Duration
58days
8 Sept 2023 – 4 Nov 2023
Municipalities hit
3
local government areas
Started on
8 Sept
2023
Heat detections
23,741
in a single hotspot: 528 MW
Danger at start
29
High · FWI index
Average daily power
2.8GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 8 Sept4 Nov
4 Nov 2023

How it evolved, day by day

8 Sept 2023 · 139 MW · 28 9 Sept 2023 · 1,134 MW · 137 10 Sept 2023 · 304 MW · 70 11 Sept 2023 · 283 MW · 52 12 Sept 2023 · 281 MW · 42 13 Sept 2023 · 183 MW · 35 14 Sept 2023 · 497 MW · 102 15 Sept 2023 · 248 MW · 75 16 Sept 2023 · 488 MW · 79 17 Sept 2023 · 802 MW · 98 18 Sept 2023 · 275 MW · 41 19 Sept 2023 · 386 MW · 47 20 Sept 2023 · 663 MW · 161 21 Sept 2023 · 1,931 MW · 351 22 Sept 2023 · 1,333 MW · 281 23 Sept 2023 · 716 MW · 166 24 Sept 2023 · 402 MW · 80 25 Sept 2023 · 321 MW · 76 26 Sept 2023 · 180 MW · 63 27 Sept 2023 · 467 MW · 84 28 Sept 2023 · 112 MW · 42 29 Sept 2023 · 205 MW · 59 30 Sept 2023 · 184 MW · 71 1 Oct 2023 · 543 MW · 154 2 Oct 2023 · 823 MW · 141 3 Oct 2023 · 343 MW · 43 4 Oct 2023 · 42 MW · 6 5 Oct 2023 · 441 MW · 120 6 Oct 2023 · 1,428 MW · 290 7 Oct 2023 · 649 MW · 163 8 Oct 2023 · 787 MW · 176 9 Oct 2023 · 719 MW · 247 10 Oct 2023 · 683 MW · 237 11 Oct 2023 · 863 MW · 367 12 Oct 2023 · 1,287 MW · 310 13 Oct 2023 · 2,764 MW · 418 14 Oct 2023 · 7,357 MW · 1172 15 Oct 2023 · 8,823 MW · 553 16 Oct 2023 · 8,674 MW · 1395 17 Oct 2023 · 11,110 MW · 1408 18 Oct 2023 · 2,510 MW · 453 19 Oct 2023 · 1,209 MW · 259 20 Oct 2023 · 900 MW · 208 21 Oct 2023 · 2,048 MW · 452 22 Oct 2023 · 5,990 MW · 920 23 Oct 2023 · 7,646 MW · 1065 24 Oct 2023 · 4,670 MW · 902 25 Oct 2023 · 8,459 MW · 1235 26 Oct 2023 · 18,298 MW · 1846 27 Oct 2023 · 17,147 MW · 2310 28 Oct 2023 · 10,178 MW · 1434 29 Oct 2023 · 1,464 MW · 327 30 Oct 2023 · 1,879 MW · 478 31 Oct 2023 · 5,549 MW · 680 1 Nov 2023 · 7,516 MW · 1093 2 Nov 2023 · 4,073 MW · 468 3 Nov 2023 · 921 MW · 70 4 Nov 2023 · 1,346 MW · 101
8 Sept 20 Sept 2 Oct 14 Oct 26 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
50km/h · peak gust
10%lowest humidity

It had gone 20 days without rain (1 mm or more) when it started. Rain came after the fire: 5.8 mm on 5 Nov.

This area had burned before

68% of the perimeter overlaps earlier fires recorded since 2016: 40,926 ha in 2016, 31,151 ha in 2017, 90,933 ha in 2018, 83,992 ha in 2019, 32,462 ha in 2020, 33,828 ha in 2021, 10,422 ha in 2022. Part of it burned more than once, so the yearly figures add up to more than the 228,903 ha that had burned before.

How big is it?

20 km
It burned the equivalent of 2.1 times the area of London (3,375 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Central Highlands (Qld) where it started
    222,892 ha
    3.7 %
  2. 105,319 ha
    1.8 %
  3. 12,333 ha
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area1.3 ha
Residents< 20

Inside the perimeter there were about 1.3 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
8 Sept 26.1 °C 36 % 34 km/h 0.1 mm High 29
9 Sept 21.7 °C 17 % 34 km/h 0.0 mm High 37
10 Sept 20.3 °C 15 % 32 km/h 0.0 mm High 36
11 Sept 21.6 °C 26 % 34 km/h 0.0 mm High 33
12 Sept 21.8 °C 23 % 39 km/h 0.0 mm Very high 40
13 Sept 23.6 °C 20 % 30 km/h 0.0 mm High 35
14 Sept 25.0 °C 20 % 29 km/h 0.0 mm High 36
15 Sept 24.9 °C 21 % 31 km/h 0.0 mm High 37
16 Sept 26.1 °C 19 % 35 km/h 0.0 mm Very high 40
17 Sept 27.2 °C 18 % 38 km/h 0.0 mm Very high 44
18 Sept 26.8 °C 17 % 36 km/h 0.0 mm Very high 43
19 Sept 27.0 °C 20 % 29 km/h 0.0 mm High 37
20 Sept 29.4 °C 18 % 32 km/h 0.0 mm Very high 39
21 Sept 32.1 °C 11 % 38 km/h 0.0 mm Extreme 56
22 Sept 28.3 °C 11 % 35 km/h 0.0 mm Very high 49
23 Sept 25.3 °C 28 % 43 km/h 0.0 mm Very high 43
24 Sept 24.0 °C 26 % 45 km/h 0.0 mm Very high 41
25 Sept 24.8 °C 22 % 35 km/h 0.0 mm High 37
26 Sept 26.8 °C 21 % 27 km/h 0.0 mm High 35
27 Sept 29.1 °C 16 % 32 km/h 0.0 mm Very high 45
28 Sept 28.4 °C 21 % 22 km/h 0.0 mm Very high 40
29 Sept 28.3 °C 22 % 33 km/h 0.0 mm Very high 41
30 Sept 27.8 °C 24 % 31 km/h 0.0 mm Very high 42
1 Oct 28.0 °C 22 % 35 km/h 0.0 mm Very high 44
2 Oct 28.8 °C 15 % 36 km/h 0.0 mm Very high 50
3 Oct 27.4 °C 27 % 44 km/h 0.0 mm Very high 49
4 Oct 28.9 °C 32 % 50 km/h 0.1 mm Extreme 51
5 Oct 25.0 °C 22 % 28 km/h 0.0 mm High 31
6 Oct 25.1 °C 21 % 35 km/h 0.0 mm Very high 41
7 Oct 26.6 °C 24 % 36 km/h 0.0 mm High 33
8 Oct 25.6 °C 25 % 43 km/h 0.0 mm Very high 40
9 Oct 24.9 °C 23 % 41 km/h 0.0 mm Very high 40
10 Oct 25.8 °C 25 % 27 km/h 0.0 mm High 36
11 Oct 27.1 °C 24 % 23 km/h 0.0 mm High 33
12 Oct 29.9 °C 19 % 34 km/h 0.0 mm High 34
13 Oct 29.9 °C 17 % 35 km/h 0.0 mm High 36
14 Oct 28.6 °C 10 % 31 km/h 0.0 mm Very high 44
15 Oct 31.1 °C 11 % 35 km/h 0.0 mm Very high 45
16 Oct 32.0 °C 15 % 44 km/h 0.0 mm Extreme 61
17 Oct 29.2 °C 13 % 34 km/h 0.0 mm Extreme 51
18 Oct 28.3 °C 25 % 39 km/h 0.0 mm Very high 41
19 Oct 28.8 °C 25 % 38 km/h 0.0 mm High 32
20 Oct 31.1 °C 18 % 32 km/h 0.0 mm High 32
21 Oct 31.9 °C 19 % 39 km/h 0.0 mm High 34
22 Oct 33.8 °C 18 % 45 km/h 0.0 mm Extreme 54
23 Oct 35.0 °C 10 % 29 km/h 0.0 mm Very high 46
24 Oct 35.5 °C 14 % 28 km/h 0.0 mm Very high 50
25 Oct 36.2 °C 14 % 37 km/h 0.0 mm Extreme 55
26 Oct 26.6 °C 16 % 43 km/h 0.0 mm Extreme 59
27 Oct 23.4 °C 17 % 48 km/h 0.0 mm Extreme 64
28 Oct 26.0 °C 18 % 38 km/h 0.0 mm Very high 48
29 Oct 28.1 °C 20 % 40 km/h 0.0 mm High 38
30 Oct 30.7 °C 21 % 38 km/h 0.0 mm Very high 39
31 Oct 34.7 °C 13 % 41 km/h 0.0 mm Extreme 53
1 Nov 33.5 °C 13 % 45 km/h 0.0 mm Extreme 57
2 Nov 30.8 °C 24 % 43 km/h 0.0 mm Very high 42
3 Nov 29.0 °C 34 % 44 km/h 0.2 mm Very high 42
4 Nov 28.9 °C 37 % 44 km/h 2.1 mm High 38
5 Nov after 27.8 °C 36 % 45 km/h 5.8 mm Moderate 16

Its twins: fires that started in the same weather

It started with an FWI of 29.2, a minimum humidity of 36% and 20 days without rain. Fires in the area that started in weather like this since 2016: 19.

FWI at the start 29.2
Minimum humidity 36 %
Days without rain 20
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Central Highlands (Qld) fire, October 2024
12,552 ha 21 days FWI 25.9 Min. humidity 36 % 118 km away, in 2024

First rain (1 mm or more) after it ended: 1.0 mm on 12 Nov.

What happened to them

17 days
median duration
9,999 ha
median area
47 %
went past 10,000 ha
4.6 mm
rain at the end (median; 16 of 19 had it)

It was 33.8 times larger than the median of its twins and lasted 58 days, against 17 days.

None of its 19 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 3 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

5.8 mmfirst rain
5 Novthe day after it ended
50km/h · max. gust

It was considered over on 4 Nov, and on 5 Nov 5.8 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 16 of 19, with a median of 4.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 1 Sept 2023
After · 11 Nov 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 15 October 2023 the air beside the fire reached 127 µg/m³ of PM2.5. That day averaged 72: 4.8 times the WHO daily guideline (15).

PM2.5 peak127 µg/m³
Days over the guideline10 days
PM10182 µg/m³
Optical depth2.04
6 Sept19 Sept2 Oct15 Oct28 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 23,741Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Central Highlands (Qld) fire last?
GWIS (Copernicus) dates it between 8 September 2023 and 4 November 2023: 58 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 337,497 hectares (3,375.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Central Highlands (Qld) (222,892 ha, 3.7 %); Maranoa (105,319 ha, 1.8 %); Murweh (12,333 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 36.2 °C, humidity dropped to 10 % and gusts hit 50 km/h. The fire danger index (FWI) reached 64, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 19. Their median duration was 17 days and their median area 9,999 ha; 47 % went past 10,000 ha. None of its 19 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 3 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 23,741 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.