Skip to content
worldfires
AU · Australia · –

Central Highlands (Qld) fire, November 2020 Central Highlands (Qld), Maranoa

Out · last detection 18 Dec 2020, 03:19 UTC

The fire started on 25 November 2020 in Central Highlands (Qld), Australia, and satellites saw it burning for 24 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 21,781 hectares from heat detections, spread across 2 municipalities.

It is the 29th largest in Queensland since 2016 (of 227 with a page). Number 8 in Australia in 2020, of 67.

Burnt area
21,781ha
GWIS perimeter (Copernicus)
Duration
24days
25 Nov 2020 – 18 Dec 2020
Municipalities hit
2
local government areas
Started on
25 Nov
2020
Heat detections
1,138
in a single hotspot: 78 MW
Danger at start
34
High · FWI index
Average daily power
288MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 25 Nov18 Dec
18 Dec 2020

How it evolved, day by day

25 Nov 2020 · 7 MW · 2 27 Nov 2020 · 12 MW · 2 28 Nov 2020 · 15 MW · 4 29 Nov 2020 · 134 MW · 39 30 Nov 2020 · 385 MW · 82 1 Dec 2020 · 370 MW · 96 2 Dec 2020 · 188 MW · 45 3 Dec 2020 · 62 MW · 17 4 Dec 2020 · 245 MW · 42 5 Dec 2020 · 1,223 MW · 322 6 Dec 2020 · 1,564 MW · 212 8 Dec 2020 · 54 MW · 22 9 Dec 2020 · 806 MW · 128 10 Dec 2020 · 14 MW · 2 11 Dec 2020 · 8 MW · 8 12 Dec 2020 · 296 MW · 91 13 Dec 2020 · 62 MW · 22 15 Dec 2020 · 10 MW · 1 18 Dec 2020 · 8 MW · 1
25 Nov 30 Nov 6 Dec 13 Dec

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
54km/h · peak gust
10%lowest humidity

It had gone 7 days without rain (1 mm or more) when it started. Rain came after the fire: 7.2 mm on 20 Dec.

This area had burned before

88% of the perimeter overlaps earlier fires recorded since 2016: 3,239 ha in 2016, 10,583 ha in 2017, 5,198 ha in 2018, 7,584 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 19,208 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 14% of the area of London (218 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Central Highlands (Qld) where it started
    18,010 ha
    0.3 %
  2. 3,943 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
25 Nov 29.2 °C 28 % 37 km/h 3.2 mm High 34
26 Nov 29.7 °C 30 % 41 km/h 0.1 mm Low 11
27 Nov 28.8 °C 33 % 34 km/h 0.0 mm Moderate 21
28 Nov 29.2 °C 18 % 37 km/h 0.0 mm High 37
29 Nov 31.5 °C 14 % 32 km/h 0.0 mm Very high 39
30 Nov 34.6 °C 18 % 37 km/h 0.0 mm High 36
1 Dec 33.3 °C 19 % 39 km/h 0.0 mm Very high 46
2 Dec 34.9 °C 20 % 32 km/h 0.0 mm High 37
3 Dec 31.5 °C 22 % 44 km/h 0.0 mm Very high 41
4 Dec 31.6 °C 25 % 37 km/h 0.0 mm High 37
5 Dec 33.7 °C 19 % 38 km/h 0.0 mm Very high 48
6 Dec 34.9 °C 17 % 44 km/h 0.0 mm Extreme 54
7 Dec 30.9 °C 28 % 48 km/h 2.0 mm High 37
8 Dec 25.5 °C 14 % 38 km/h 0.0 mm High 23
9 Dec 29.4 °C 10 % 40 km/h 0.0 mm High 34
10 Dec 27.3 °C 28 % 39 km/h 0.0 mm High 31
11 Dec 21.2 °C 40 % 40 km/h 1.8 mm Low 9
12 Dec 25.1 °C 27 % 42 km/h 0.0 mm High 31
13 Dec 24.0 °C 32 % 45 km/h 0.0 mm High 37
14 Dec 22.9 °C 48 % 54 km/h 1.6 mm Very high 38
15 Dec 24.3 °C 49 % 26 km/h 3.9 mm Low 7
16 Dec 27.4 °C 40 % 41 km/h 6.2 mm Low 11
17 Dec 30.2 °C 34 % 33 km/h 1.5 mm Very low 5
18 Dec 33.0 °C 30 % 31 km/h 1.6 mm Low 9
19 Dec after 31.2 °C 33 % 34 km/h 0.7 mm Low 8
20 Dec after 29.8 °C 40 % 37 km/h 7.2 mm Moderate 19

Its twins: fires that started in the same weather

It started with an FWI of 34.4, a minimum humidity of 28% and 7 days without rain. Fires in the area that started in weather like this since 2016: 20.

FWI at the start 34.4
Minimum humidity 28 %
Days without rain 7
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Murweh fire, October 2024
5,278 ha 6 days FWI 34.2 Min. humidity 31 % 56 km away, in 2024

First rain (1 mm or more) after it ended: 2.7 mm on 28 Oct.

What happened to them

17 days
median duration
10,392 ha
median area
55 %
went past 10,000 ha
2.4 mm
rain at the end (median; 16 of 20 had it)

It was 2.1 times larger than the median of its twins and lasted 24 days, against 17 days.

Only 4 of its 20 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 4 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.4 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

7.2 mmfirst rain
20 Dec2 days after it ended
54km/h · max. gust

It was considered over on 18 Dec, and on 20 Dec 7.2 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 16 of 20, with a median of 2.4 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 18 Nov 2020
After · 25 Dec 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 1,138Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Central Highlands (Qld) fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 25 November 2020 to 18 December 2020 (24 days). The perimeter dates it from 25 November 2020 to 15 December 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 21,781 hectares (217.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Central Highlands (Qld) (18,010 ha, 0.3 %); Maranoa (3,943 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 34.9 °C, humidity dropped to 10 % and gusts hit 54 km/h. The fire danger index (FWI) reached 54, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 20. Their median duration was 17 days and their median area 10,392 ha; 55 % went past 10,000 ha. Only 4 of its 20 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 4 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.4 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 15 December 2020 → 18 December 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 25 November 2020 to 15 December 2020. 1,138 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.