How long did the Castro Daire fire last?

Copernicus dates it between 7 October 2016 and 7 October 2016: 1 day between the first and last image with fire. According to ICNF, it was detected on 7 October 2016 at 11:17 and declared extinguished on 8 October 2016.

How much area did it burn?

The perimeter Copernicus measured from satellite imagery is 116 hectares (1.2 km²). Official national figures may differ.

Which municipalities burned?

The fire entered 2 municipalities: Cujó (98 ha, 11 %); São Joaninho (18 ha, 2.3 %).

Did the fire reach a town?

The closest fire to a town centre came within 0.9 km of Cujó. That is the distance to the perimeter or nearest hotspot; it does not mean it entered the houses.

What was the weather like?

During the fire the temperature reached 21.1 °C, humidity dropped to 28 % and gusts hit 23 km/h. The fire danger index (FWI) reached 21, class Moderate.

Where does this data come from?

From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Portugal (geoBoundaries). It is not an official report.

PT · Portugal · 2016-10-07 → 2016-10-07

Castro Daire fire, October 2016 Cujó, São Joaninho

Out · last detection 7 Oct 2016, 14:32 UTC

The fire started on 7 October 2016 in Cujó, Portugal, and satellites saw it burning for 1 day. Copernicus mapped a burnt perimeter of 116 hectares from satellite imagery, spread across 2 municipalities. According to ICNF, it was detected on 7 October 2016 at 11:17 and declared extinguished on 8 October 2016.

It is the 15th largest in Castro Daire since 2016 (of 15 with a page). Number 165 in Portugal in 2016, of 179.

Burnt area: 116ha; Copernicus perimeter
Duration: 1day; 7 Oct 2016 – 7 Oct 2016
Municipalities hit: 2; freguesias
Started on: 7 Oct; 2016
Heat detections: 9; in a single hotspot: 47 MW
Danger at start: 21; Moderate · FWI index
Energy released: 196MW; sum of detected power

HOTSPOTS BY DAY 7 Oct7 Oct

How it evolved, day by day

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

21°high

23km/h · peak gust

28%lowest humidity

It had gone 21 days without rain (1 mm or more) when it started. Rain came after the fire: 4.2 mm on 11 Oct.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

What happened to each town

Cujó 245 inhabitants · 0.9 km from the town where it started

98 ha reached on 7 Oct

11 %
São Joaninho 1.6 km from the town

18 ha reached on 7 Oct

2.3 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

Other natural land81 %
Agricultural areas19 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

Official record

According to ICNF, this fire started on 7 October 2016 and burned 133 ha (the satellite measured 116 ha).

Castro Daire Cujó 7 October 2016 · 11:17 133 ha · extinguished on 8 October 2016 · cause: unknown

ICNF (Instituto da Conservação da Natureza e das Florestas). This is the agency’s operational record: its figures may be revised when the year’s statistics are closed.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day	High	Min. humidity	Peak gust	Rain	Danger (FWI)
7 Oct	21.1 °C	28 %	23 km/h	0.0 mm	Moderate 21
8 Oct after	21.7 °C	44 %	29 km/h	0.0 mm	Moderate 20
9 Oct after	20.4 °C	42 %	34 km/h	0.0 mm	Moderate 21
10 Oct after	19.4 °C	37 %	31 km/h	0.0 mm	Moderate 20
11 Oct after	16.8 °C	53 %	40 km/h	4.2 mm	Very low 3

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

↔

Before · 30 Sept 2016

After · 14 Oct 2016

Before After

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 8 October 2016 the air beside the fire reached 28 µg/m³ of PM2.5. That day averaged 16: 1.1 times the WHO daily guideline (15).

PM2.5 peak28 µg/m³

Days over the guideline1 day

PM1032 µg/m³

WHO 15

5678910

Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 9Every satellite heat detection, one by one, with time, satellite, power and coordinates.

⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.

Date and time	Satellite	FRP (MW)	Lat	Lon

Other fires nearby

All fires in Portugal ›

Frequently asked questions

How long did the Castro Daire fire last?: Copernicus dates it between 7 October 2016 and 7 October 2016: 1 day between the first and last image with fire. According to ICNF, it was detected on 7 October 2016 at 11:17 and declared extinguished on 8 October 2016.
How much area did it burn?: The perimeter Copernicus measured from satellite imagery is 116 hectares (1.2 km²). Official national figures may differ.
Which municipalities burned?: The fire entered 2 municipalities: Cujó (98 ha, 11 %); São Joaninho (18 ha, 2.3 %).
Did the fire reach a town?: The closest fire to a town centre came within 0.9 km of Cujó. That is the distance to the perimeter or nearest hotspot; it does not mean it entered the houses.
What was the weather like?: During the fire the temperature reached 21.1 °C, humidity dropped to 28 % and gusts hit 23 km/h. The fire danger index (FWI) reached 21, class Moderate.
Where does this data come from?: From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Portugal (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112

Satellite cross-check

NASA FIRMS ↗
EFFIS · Copernicus ↗

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error

What do you think is wrong?

Dates or duration Place or towns Burned area Name It was not a wildfire Same fire as another page Something else

What really happened?

Your connection to the fire (optional) Email (optional)

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (CC0 1.0 Universal (CC0 1.0) Public Domain Dedication). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.

Where it burned