Skip to content
worldfires
BR · Brazil · –

Canaã dos Carajás fire, October 2017 Canaã dos Carajás

Out · last detection

The fire started on in Canaã dos Carajás, Brazil, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,167 hectares from heat detections, spread across a single municipality.

It is number 572 by size of the 957 fires with a page that started in Pará since 2016. Number 608 in Brazil in 2017, of 994.

Burnt area
4,167ha
GWIS perimeter (Copernicus)
Duration
13days
11 Oct 2017 – 23 Oct 2017
Municipalities hit
1
municipalities
Started on
11 Oct
2017
Heat detections
287
in a single hotspot: 267 MW
Danger at start
22
High · FWI index
Average daily power
136MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 11 Oct23 Oct
23 Oct 2017

How it evolved, day by day

11 Oct 2017 · 9 MW · 6 12 Oct 2017 · 121 MW · 13 13 Oct 2017 · 113 MW · 11 14 Oct 2017 · 16 MW · 6 15 Oct 2017 · 3 MW · 3 17 Oct 2017 · 52 MW · 7 18 Oct 2017 · 82 MW · 23 19 Oct 2017 · 93 MW · 12 20 Oct 2017 · 170 MW · 43 21 Oct 2017 · 280 MW · 45 22 Oct 2017 · 595 MW · 86 23 Oct 2017 · 96 MW · 32
11 Oct 14 Oct 18 Oct 22 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
49km/h · peak gust
44%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 11.3 mm on 30 Oct.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 2.6% of the area of London (42 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Canaã dos Carajás 77,079 inhabitants where it started
    4,194 ha reached on 11 Oct
    1.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area1.5 ha
Residents≈ 40

Inside the perimeter there were about 1.5 hectares of built-up land and about 40 residents (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
11 Oct 31.1 °C 49 % 32 km/h 2.6 mm High 22
12 Oct 32.3 °C 46 % 35 km/h 0.4 mm Low 10
13 Oct 31.5 °C 46 % 29 km/h 0.8 mm Moderate 20
14 Oct 32.0 °C 49 % 31 km/h 2.0 mm Moderate 20
15 Oct 32.0 °C 50 % 28 km/h 0.2 mm Low 10
16 Oct 29.9 °C 59 % 30 km/h 2.0 mm Moderate 18
17 Oct 29.7 °C 57 % 36 km/h 1.5 mm Low 7
18 Oct 30.7 °C 52 % 35 km/h 1.3 mm Moderate 19
19 Oct 32.5 °C 46 % 40 km/h 0.7 mm High 24
20 Oct 31.4 °C 50 % 46 km/h 0.7 mm High 25
21 Oct 32.9 °C 44 % 49 km/h 0.0 mm High 33
22 Oct 32.6 °C 44 % 41 km/h 0.1 mm High 28
23 Oct 30.1 °C 55 % 22 km/h 0.2 mm Moderate 20
24 Oct after 33.3 °C 45 % 25 km/h 0.1 mm High 24
25 Oct after 30.9 °C 55 % 34 km/h 0.5 mm High 23
26 Oct after 30.4 °C 51 % 36 km/h 0.4 mm High 25
27 Oct after 28.3 °C 59 % 28 km/h 0.4 mm Moderate 20
28 Oct after 30.9 °C 51 % 28 km/h 0.1 mm High 25
29 Oct after 32.6 °C 47 % 27 km/h 0.0 mm High 25
30 Oct after 29.5 °C 56 % 28 km/h 11.3 mm Moderate 20

Its twins: fires that started in the same weather

It started with an FWI of 22.5, a minimum humidity of 49% and 1 day without rain. Fires in the area that started in weather like this since 2016: 3.

FWI at the start 22.5
Minimum humidity 49 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Ourilândia do Norte fire, September 2019
6,115 ha 9 days FWI 17.1 Min. humidity 49 % 106 km away, in 2019

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

Fires in the area that started in similar weather: 3. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

11.3 mmfirst rain
30 Oct7 days after it ended
49km/h · max. gust

It was considered over on 23 Oct, and on 30 Oct 11.3 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 4 Oct 2017
After · 30 Oct 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 287Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Canaã dos Carajás fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 11 October 2017 to 23 October 2017 (13 days). The perimeter dates it from 17 October 2017 to 23 October 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,167 hectares (41.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Canaã dos Carajás (4,194 ha, 1.3 %).
What was the weather like?
During the fire the temperature reached 32.9 °C, humidity dropped to 44 % and gusts hit 49 km/h. The fire danger index (FWI) reached 33, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 17 October 2017 → 11 October 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 17 October 2017 to 23 October 2017. 287 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.