Skip to content
worldfires
PT · Portugal ·

Cabeceiras de Basto fire, 16 October 2017 Bucos, Salto, Cabeceiras de Basto

Out · last detection 16 Oct 2017, 01:15 UTC

The fire started on 16 October 2017 in Salto, Portugal, and satellites saw it burning for 1 day. Copernicus mapped a burnt perimeter of 1,077 hectares from satellite imagery, spread across 3 freguesias.

It is the 2th largest in Montalegre since 2016 (of 65 with a page). Number 51 in Portugal in 2017, of 211.

The power measured by the satellite is low (10.0 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
1,077ha
Copernicus perimeter
Duration
1day
16 Oct 2017 – 16 Oct 2017
Freguesias hit
3
freguesias
Started on
16 Oct
2017
Heat detections
3
in a single hotspot: 10 MW
Danger at start
19
Moderate · FWI index
Average daily power
30MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 16 Oct16 Oct

How it evolved, day by day

16 Oct 2017 · 30 MW · 3

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

18°high
39km/h · peak gust
56%lowest humidity

It had gone 24 days without rain (1 mm or more) when it started. Rain came after the fire: 24.5 mm on 17 Oct.

This area had burned before

1% of the perimeter overlaps earlier fires recorded since 2016: 9 ha in 2016.

How big is it?

10 km
It burned the equivalent of 0.7% of the area of London (11 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each freguesia

  1. Bucos 469 inhabitants · 0.8 km from the centre
    546 ha
    31 %
  2. Salto 1,263 inhabitants · 3.5 km from the centre where it started
    470 ha reached on 16 Oct
    6.0 %
  3. Cabeceiras de Basto 616 inhabitants · 0.8 km from the centre
    62 ha
    2.5 %

Burnt area inside each freguesia, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land67 %
  • Scrub and transitional woodland16 %
  • Mixed forest12 %
  • Coniferous forest4.5 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

People and buildings inside the perimeter

GHSL 2015
Built-up area0.14 ha
Residents< 20

Inside the perimeter there were about 0.14 hectares of built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

Official record

Several official records match this area

According to ICNF, 2 fires started inside this perimeter on these dates, totalling 1,357 ha (the satellite measured 1,077 ha). The two figures differ a lot, so these may not be exactly the same fire: take them as nearby records.

ICNF records each fire that started at a different time or place separately; the satellite sees a single burned area, so this page groups them together. The numbers on the map show where each one started.

When each one burned

1 1,323 ha 2 34 ha
15 Oct17 Oct
arson cause unknown or not published
  1. 1 Cabeceiras de Basto Bucos 15 October 2017 · 19:42 1,323 ha · extinguished on 16 October 2017 · cause: arson
  2. 2 Vieira do Minho Rossas 16 October 2017 · 17:39 34 ha · extinguished on 16 October 2017 · cause: unknown

Total according to ICNF: 1,357 ha, 126 % of the 1,077 ha in the satellite perimeter.

ICNF (Instituto da Conservação da Natureza e das Florestas). This is the agency’s operational record: its figures may be revised when the year’s statistics are closed.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
16 Oct 17.6 °C 56 % 39 km/h 1.4 mm Moderate 19
17 Oct after 14.0 °C 50 % 43 km/h 24.5 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 18.7, a minimum humidity of 56% and 24 days without rain. Fires in the area that started in weather like this since 2016: 36.

FWI at the start 18.7
Minimum humidity 56 %
Days without rain 24
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

União das Freguesias de Ruivães e Campos fire, September 2026
168 ha 1 day FWI 16.6 Min. humidity 54 % 10 km away, in 2026

First rain (1 mm or more) after it ended: 2.1 mm on 28 Sept.

What happened to them

2 days
median duration
249 ha
median area
6 %
went past 1,000 ha
3.8 mm
rain at the end (median; 27 of 36 had it)

It was 4.3 times larger than the median of its twins and lasted 1 day, against 2 days.

Only 2 of its 36 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 9 of 36, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

24.5 mmfirst rain
17 Octthe day after it ended
39km/h · max. gust

It was considered over on 16 Oct, and on 17 Oct 24.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 27 of 36, with a median of 3.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 9 Oct 2017
After · 23 Oct 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 16 October 2017 the air beside the fire reached 134 µg/m³ of PM2.5. That day averaged 85: 5.6 times the WHO daily guideline (15).

PM2.5 peak134 µg/m³
Days over the guideline3 days
PM10187 µg/m³
14 Oct16 Oct18 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 3Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Portugal

Frequently asked questions

How long did the Cabeceiras de Basto fire last?
Copernicus dates it between 16 October 2017 and 16 October 2017: 1 day between the first and last image with fire.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 1,077 hectares (10.8 km²). Official national figures may differ.
Which freguesias burned?
The fire entered 3 freguesias: Bucos (546 ha, 31 %); Salto (470 ha, 6.0 %); Cabeceiras de Basto (62 ha, 2.5 %).
Did the fire reach a town?
The fire came within 0.8 km of the centre of Bucos, the closest of the areas it touched. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 17.6 °C, humidity dropped to 56 % and gusts hit 39 km/h. The fire danger index (FWI) reached 19, class Moderate.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Portugal (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 36. Their median duration was 2 days and their median area 249 ha; 6 % went past 1,000 ha. Only 2 of its 36 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 9 of 36, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 3 Suomi-NPP VIIRS detections on those dates.
  • Compared with ICNF: 1,357 official ha against 1,077 ha of perimeter; similar, but with reservations.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Freguesia boundaries come from geoBoundaries ADM3 (CC0 1.0 Universal (CC0 1.0) Public Domain Dedication). The area per freguesia is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.