Skip to content
worldfires
RO · Romania · –

C.A. Rosetti fire, 16 March 2020 C.A. Rosetti

Out · last detection

The fire started on in C.A. Rosetti, Romania, and satellites saw it burning for 4 days. Copernicus mapped a burnt perimeter of 245 hectares from satellite imagery, spread across a single municipality.

This record is fire in the reed beds of the Danube Delta, not a forest fire. Thousands of hectares of reed burn in the delta every year, mostly between January and April, and many of these burns are deliberate. That is why it is left out of the fire rankings.

The power measured by the satellite is low (22.6 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
245ha
Copernicus perimeter
Duration
4days
16 Mar 2020 – 19 Mar 2020
Municipalities hit
1
municipalities
Started on
16 Mar
2020
Heat detections
9
in a single hotspot: 23 MW
Danger at start
11
Low · FWI index
Average daily power
52MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 16 Mar19 Mar
17 Mar 2020

How it evolved, day by day

16 Mar 2020 · 40 MW · 6 17 Mar 2020 · 64 MW · 3
16 Mar 17 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

15°high
43km/h · peak gust
23%lowest humidity

It had gone 5 days without rain (1 mm or more) when it started. Rain came after the fire: 1.3 mm on 22 Mar.

This area had burned before

96% of the perimeter overlaps earlier fires recorded since 2016: 146 ha in 2016, 81 ha in 2017, 235 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 235 ha that had burned before.

What happened to each town

  1. C.A. Rosetti 636 inhabitants · 4.1 km from the centre where it started
    245 ha reached on 16 Mar
    0.9 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land98 %
  • Broadleaved forest1.6 %

Natura 2000 protected area affected: 100 %

Natura 2000 sites (European Environment Agency, 2024 release) crossed by the perimeter.

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
16 Mar 8.4 °C 23 % 30 km/h 0.0 mm Low 11
17 Mar 10.7 °C 36 % 43 km/h 0.0 mm Moderate 16
18 Mar 10.1 °C 43 % 36 km/h 0.0 mm Moderate 14
19 Mar 14.7 °C 30 % 26 km/h 0.0 mm Moderate 12
20 Mar after 18.4 °C 42 % 41 km/h 0.0 mm Moderate 17
21 Mar after 18.4 °C 37 % 44 km/h 0.0 mm Moderate 20
22 Mar after 7.7 °C 65 % 37 km/h 1.3 mm Very low 4

Its twins: fires that started in the same weather

It started with an FWI of 10.7, a minimum humidity of 23% and 5 days without rain. Fires in the area that started in weather like this since 2017: 16.

FWI at the start 10.7
Minimum humidity 23 %
Days without rain 5
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Artsyi fire, March 2022
224 ha 1 day FWI 10.3 Min. humidity 28 % 48 km away, in 2022

First rain (1 mm or more) after it ended: 1.7 mm on 25 Mar.

What happened to them

1 day
median duration
175 ha
median area
6 %
went past 1,000 ha
2.0 mm
rain at the end (median; 14 of 16 had it)

It burned an area similar to its twins (245 ha against a median of 175 ha) and lasted 4 days, against 1 day.

In 2 of 16, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.3 mmfirst rain
22 Mar3 days after it ended
43km/h · max. gust

It was considered over on 19 Mar, and on 22 Mar 1.3 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 14 of 16, with a median of 2.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2017.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 9 Mar 2020
After · 26 Mar 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 20 March 2020 the air beside the fire reached 32 µg/m³ of PM2.5. That day averaged 24: 1.6 times the WHO daily guideline (15).

PM2.5 peak32 µg/m³
Days over the guideline2 days
PM1042 µg/m³
14 Mar16 Mar18 Mar20 Mar22 Mar
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 9Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Romania

Frequently asked questions

How long did the C.A. Rosetti fire last?
Copernicus dates it between 16 March 2020 and 19 March 2020: 4 days between the first and last image with fire.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 245 hectares (2.4 km²). Official national figures may differ.
Which municipalities burned?
The fire only entered C.A. Rosetti (245 ha, 0.9 %).
Did the fire reach a town?
The fire started in C.A. Rosetti and came within 4.1 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 14.7 °C, humidity dropped to 23 % and gusts hit 43 km/h. The fire danger index (FWI) reached 16, class Moderate.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Romania (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2017 with a similar FWI, humidity and dry spell: 16. Their median duration was 1 day and their median area 175 ha; 6 % went past 1,000 ha. In 2 of 16, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 9 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.