Skip to content
worldfires
BR · Brazil · –

Buriti Bravo fire, 5 September 2017 Buriti Bravo, Fortuna

Out · last detection 28 Sept 2017, 16:26 UTC

The fire started on 5 September 2017 in Buriti Bravo, Brazil, and satellites saw it burning for 23 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 20,019 hectares from heat detections, spread across 2 municipalities.

It is the 13th largest in Maranhão since 2016 (of 531 with a page). Number 70 in Brazil in 2017, of 994.

Burnt area
20,019ha
GWIS perimeter (Copernicus)
Duration
23days
5 Sept 2017 – 27 Sept 2017
Municipalities hit
2
municipalities
Started on
5 Sept
2017
Heat detections
959
in a single hotspot: 191 MW
Danger at start
49
Very high · FWI index
Average daily power
698MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 5 Sept27 Sept
28 Sept 2017

How it evolved, day by day

5 Sept 2017 · 19 MW · 1 6 Sept 2017 · 32 MW · 9 9 Sept 2017 · 765 MW · 19 10 Sept 2017 · 1,462 MW · 115 11 Sept 2017 · 1,601 MW · 139 12 Sept 2017 · 1,261 MW · 125 13 Sept 2017 · 360 MW · 35 14 Sept 2017 · 2,403 MW · 106 15 Sept 2017 · 2,370 MW · 141 16 Sept 2017 · 909 MW · 91 17 Sept 2017 · 220 MW · 24 18 Sept 2017 · 124 MW · 20 19 Sept 2017 · 1,788 MW · 56 20 Sept 2017 · 542 MW · 32 21 Sept 2017 · 41 MW · 10 22 Sept 2017 · 9 MW · 2 23 Sept 2017 · 98 MW · 8 24 Sept 2017 · 15 MW · 2 25 Sept 2017 · 3 MW · 1 26 Sept 2017 · 9 MW · 3 27 Sept 2017 · 1,312 MW · 16 28 Sept 2017 · 17 MW · 4
5 Sept 14 Sept 22 Sept 27 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
52km/h · peak gust
31%lowest humidity

It had gone 29 days without rain (1 mm or more) when it started.

This area had burned before

26% of the perimeter overlaps earlier fires recorded since 2016: 5,244 ha in 2016.

How big is it?

10 km
It burned the equivalent of 13% of the area of London (200 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Buriti Bravo 22,455 inhabitants where it started
    17,568 ha reached on 5 Sept
    11 %
  2. Fortuna 16,976 inhabitants
    2,582 ha reached on 10 Sept
    3.7 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area2.3 ha
Residents≈ 400

Inside the perimeter there were about 2.3 hectares of built-up land and about 400 residents (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Strong wind: 3.1 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
5 Sept 33.0 °C 41 % 52 km/h 0.0 mm Very high 49
6 Sept 35.5 °C 37 % 45 km/h 0.0 mm Extreme 51
7 Sept 35.0 °C 39 % 47 km/h 0.0 mm Very high 48
8 Sept 36.5 °C 35 % 40 km/h 0.0 mm Very high 46
9 Sept 35.4 °C 32 % 43 km/h 0.0 mm Extreme 51
10 Sept 35.7 °C 34 % 46 km/h 0.0 mm Extreme 51
11 Sept 35.6 °C 33 % 45 km/h 0.0 mm Extreme 52
12 Sept 36.0 °C 34 % 47 km/h 0.0 mm Extreme 52
13 Sept 35.2 °C 38 % 48 km/h 0.0 mm Extreme 50
14 Sept 35.8 °C 34 % 46 km/h 0.0 mm Extreme 52
15 Sept 35.1 °C 34 % 49 km/h 0.0 mm Extreme 53
16 Sept 35.2 °C 31 % 48 km/h 0.0 mm Extreme 51
17 Sept 34.9 °C 34 % 46 km/h 0.0 mm Very high 48
18 Sept 36.1 °C 34 % 46 km/h 0.0 mm Extreme 52
19 Sept 36.7 °C 32 % 42 km/h 0.0 mm Extreme 51
20 Sept 36.3 °C 34 % 43 km/h 0.0 mm Extreme 51
21 Sept 36.3 °C 33 % 44 km/h 0.0 mm Very high 50
22 Sept 34.8 °C 38 % 48 km/h 0.0 mm Very high 50
23 Sept 35.9 °C 33 % 42 km/h 0.0 mm Very high 46
24 Sept 36.1 °C 31 % 38 km/h 0.0 mm Very high 48
25 Sept 35.1 °C 36 % 42 km/h 0.0 mm Very high 48
26 Sept 36.7 °C 34 % 40 km/h 0.0 mm Very high 48
27 Sept 36.8 °C 33 % 42 km/h 0.0 mm Very high 48
28 Sept after 37.2 °C 34 % 43 km/h 0.0 mm Very high 47
29 Sept after 37.6 °C 33 % 39 km/h 0.0 mm Very high 48
30 Sept after 37.3 °C 29 % 31 km/h 0.0 mm Very high 40
1 Oct after 37.5 °C 27 % 34 km/h 0.0 mm Very high 47
2 Oct after 38.1 °C 32 % 32 km/h 0.0 mm Very high 46
3 Oct after 37.6 °C 34 % 33 km/h 0.0 mm Very high 46
4 Oct after 37.7 °C 32 % 31 km/h 0.0 mm Very high 46
5 Oct after 36.9 °C 30 % 44 km/h 0.0 mm Extreme 55
6 Oct after 36.0 °C 36 % 46 km/h 0.0 mm Extreme 51
7 Oct after 36.5 °C 36 % 41 km/h 0.0 mm Very high 50

Its twins: fires that started in the same weather

It started with an FWI of 49.0, a minimum humidity of 41% and 29 days without rain. Fires in the area that started in weather like this since 2016: 47.

FWI at the start 49.0
Minimum humidity 41 %
Days without rain 29
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Uruçuí fire, August 2019
3,127 ha 11 days FWI 47.7 Min. humidity 38 % 220 km away, in 2019

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

15 days
median duration
4,026 ha
median area
6 %
went past 10,000 ha
5.3 mm
rain at the end (median; 13 of 47 had it)

It was 5.0 times larger than the median of its twins and lasted 23 days, against 15 days.

None of its 47 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 34 of 47, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
52km/h · max. gust

It was considered over on 27 Sept, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 13 of 47, with a median of 5.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 29 Aug 2017
After · 4 Oct 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 959Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Buriti Bravo fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 5 September 2017 to 27 September 2017 (23 days). The perimeter dates it from 5 September 2017 to 21 September 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 20,019 hectares (200.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Buriti Bravo (17,568 ha, 11 %); Fortuna (2,582 ha, 3.7 %).
What was the weather like?
During the fire the temperature reached 36.8 °C, humidity dropped to 31 % and gusts hit 52 km/h. The fire danger index (FWI) reached 53, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 47. Their median duration was 15 days and their median area 4,026 ha; 6 % went past 10,000 ha. None of its 47 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 34 of 47, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 21 September 2017 → 27 September 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 5 September 2017 to 21 September 2017. 959 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.