Skip to content
worldfires
CD · Democratic Republic of the Congo · –

Bumba fire, 25 February 2026 Bumba

Out · last detection 12 Mar 2026, 12:10 UTC

The fire started on 25 February 2026 in Bumba, Democratic Republic of the Congo, and satellites saw it burning for 16 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 41,571 hectares from heat detections, spread across a single municipality.

Number 26 in Democratic Republic of the Congo in 2026, of 515.

GWIS near-real-time perimeter, from the layer that changed in August 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Compare with…

Suggestions: Bumba · 2024Bumba · 2020Bumba · 2021

Burnt area
41,571ha
GWIS perimeter (Copernicus)
Duration
16days
25 Feb 2026 – 12 Mar 2026
Municipalities hit
1
territories
Started on
25 Feb
2026
Heat detections
947
in a single hotspot: 158 MW
Danger at start
22
High · FWI index
Average daily power
937MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 25 Feb12 Mar
12 Mar 2026

How it evolved, day by day

25 Feb 2026 · 1,034 MW · 93 26 Feb 2026 · 850 MW · 51 27 Feb 2026 · 333 MW · 47 28 Feb 2026 · 882 MW · 55 1 Mar 2026 · 9 MW · 1 2 Mar 2026 · 171 MW · 20 4 Mar 2026 · 26 MW · 6 5 Mar 2026 · 153 MW · 12 6 Mar 2026 · 2,017 MW · 149 7 Mar 2026 · 3,940 MW · 197 8 Mar 2026 · 3,390 MW · 185 9 Mar 2026 · 198 MW · 25 10 Mar 2026 · 114 MW · 12 11 Mar 2026 · 694 MW · 84 12 Mar 2026 · 237 MW · 10
25 Feb 28 Feb 4 Mar 7 Mar 10 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (21 passes) and with what wind. Watch the film

The weather it burned in

38°high
32km/h · peak gust
19%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started. Rain came after the fire: 6.5 mm on 15 Mar.

This area had burned before

89% of the perimeter overlaps earlier fires recorded since 2016: 7,979 ha in 2016, 24,277 ha in 2017, 6,197 ha in 2018, 8,262 ha in 2019, 19,468 ha in 2020, 21,908 ha in 2021, 3,429 ha in 2022, 754 ha in 2023, 29,077 ha in 2024, 12,306 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 37,134 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 26% of the area of London (416 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Bumba where it started
    41,859 ha reached on 25 Feb
    2.6 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
25 Feb 35.1 °C 30 % 21 km/h 0.1 mm High 22
26 Feb 35.2 °C 19 % 25 km/h 0.0 mm High 34
27 Feb 35.3 °C 21 % 27 km/h 0.0 mm High 32
28 Feb 34.8 °C 29 % 32 km/h 0.0 mm Very high 39
1 Mar 35.2 °C 30 % 22 km/h 0.0 mm High 29
2 Mar 33.1 °C 41 % 30 km/h 1.6 mm High 28
3 Mar 30.2 °C 52 % 23 km/h 0.5 mm Low 6
4 Mar 32.6 °C 37 % 19 km/h 0.2 mm Moderate 20
5 Mar 33.1 °C 34 % 24 km/h 0.0 mm High 23
6 Mar 34.9 °C 32 % 24 km/h 0.0 mm High 27
7 Mar 35.7 °C 30 % 27 km/h 0.0 mm High 32
8 Mar 37.3 °C 24 % 29 km/h 0.0 mm Very high 41
9 Mar 38.4 °C 20 % 24 km/h 0.0 mm Very high 41
10 Mar 34.5 °C 32 % 22 km/h 0.0 mm High 35
11 Mar 35.4 °C 32 % 29 km/h 0.0 mm High 34
12 Mar 32.9 °C 43 % 27 km/h 2.8 mm High 29
13 Mar after 35.2 °C 39 % 29 km/h 0.2 mm Moderate 14
14 Mar after 37.7 °C 28 % 22 km/h 0.6 mm High 29
15 Mar after 28.1 °C 62 % 26 km/h 6.5 mm Very low 1

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 18 Feb 2026
After · 19 Mar 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 3 March 2026 the air beside the fire reached 89 µg/m³ of PM2.5. That day averaged 71: 4.7 times the WHO daily guideline (15).

PM2.5 peak89 µg/m³
Days over the guideline13 days
PM10104 µg/m³
Optical depth1.08
2 Mar5 Mar8 Mar11 Mar14 Mar
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 947Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Democratic Republic of the Congo

Frequently asked questions

How long did the Bumba fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 25 February 2026 to 12 March 2026 (16 days). The perimeter dates it from 4 March 2026 to 12 March 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 41,571 hectares (415.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Bumba (41,859 ha, 2.6 %).
What was the weather like?
During the fire the temperature reached 38.4 °C, humidity dropped to 19 % and gusts hit 32 km/h. The fire danger index (FWI) reached 41, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Democratic Republic of the Congo (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 3 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 4 March 2026 → 25 February 2026.
  2. Start date: 25 February 2026 → 4 March 2026.
  3. Start date: 4 March 2026 → 25 February 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 4 March 2026 to 12 March 2026. 947 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.