Skip to content
worldfires
AR · Argentina · –

Bermejo fire, 25 August 2026 Bermejo

Out · last detection 28 Sept 2026, 17:43 UTC

The fire started on 25 August 2026 in Bermejo, Argentina, and satellites saw it burning for 36 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 19,853 hectares from heat detections, spread across a single municipality.

Number 3 in Argentina in 2026, of 93.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
19,853ha
GWIS perimeter (Copernicus)
Duration
36days
25 Aug 2026 – 29 Sept 2026
Municipalities hit
1
departments
Started on
25 Aug
2026
Heat detections
918
in a single hotspot: 154 MW
Danger at start
6
Low · FWI index
Average daily power
752MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 25 Aug29 Sept
28 Sept 2026

How it evolved, day by day

25 Aug 2026 · 7 MW · 1 27 Aug 2026 · 418 MW · 15 28 Aug 2026 · 47 MW · 4 30 Aug 2026 · 7 MW · 1 31 Aug 2026 · 89 MW · 11 1 Sept 2026 · 545 MW · 13 2 Sept 2026 · 633 MW · 19 3 Sept 2026 · 189 MW · 17 4 Sept 2026 · 10 MW · 1 6 Sept 2026 · 23 MW · 3 7 Sept 2026 · 138 MW · 18 8 Sept 2026 · 52 MW · 8 9 Sept 2026 · 691 MW · 46 10 Sept 2026 · 74 MW · 13 12 Sept 2026 · 131 MW · 8 14 Sept 2026 · 369 MW · 16 15 Sept 2026 · 365 MW · 20 16 Sept 2026 · 1,392 MW · 63 17 Sept 2026 · 28 MW · 23 20 Sept 2026 · 631 MW · 30 21 Sept 2026 · 46 MW · 11 23 Sept 2026 · 71 MW · 9 24 Sept 2026 · 134 MW · 17 25 Sept 2026 · 1,694 MW · 72 26 Sept 2026 · 2,966 MW · 136 27 Sept 2026 · 6,296 MW · 200 28 Sept 2026 · 3,265 MW · 143
25 Aug 2 Sept 9 Sept 17 Sept 27 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (36 passes) and with what wind. Watch the film

The weather it burned in

44°high
65km/h · peak gust
17%lowest humidity

It had gone 5 days without rain (1 mm or more) when it started. Rain came after the fire: 2.2 mm on 30 Sept.

This area had burned before

92% of the perimeter overlaps earlier fires recorded since 2016: 24 ha in 2016, 565 ha in 2017, 638 ha in 2019, 1,039 ha in 2020, 3,736 ha in 2021, 6,817 ha in 2022, 11,162 ha in 2023, 15,469 ha in 2024, 1,755 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 18,345 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 13% of the area of London (199 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Bermejo where it started
    21,517 ha reached on 25 Aug
    1.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area5.5 ha
Residents≈ 350

Inside the perimeter there were about 5.5 hectares of built-up land and about 350 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
25 Aug 27.2 °C 43 % 22 km/h 0.0 mm Low 6
26 Aug 32.3 °C 47 % 38 km/h 0.0 mm Low 11
27 Aug 36.3 °C 34 % 54 km/h 0.0 mm High 22
28 Aug 29.2 °C 54 % 32 km/h 0.0 mm Moderate 12
29 Aug 26.2 °C 58 % 31 km/h 0.1 mm Low 9
30 Aug 22.2 °C 73 % 22 km/h 1.0 mm Very low 4
31 Aug 27.0 °C 55 % 29 km/h 2.1 mm Very low 1
1 Sept 28.7 °C 37 % 32 km/h 0.0 mm Low 6
2 Sept 30.0 °C 37 % 36 km/h 0.0 mm Moderate 12
3 Sept 34.5 °C 37 % 32 km/h 0.0 mm Moderate 18
4 Sept 28.2 °C 38 % 41 km/h 0.0 mm Moderate 20
5 Sept 21.4 °C 36 % 36 km/h 0.0 mm Moderate 19
6 Sept 21.0 °C 33 % 36 km/h 0.0 mm Moderate 19
7 Sept 22.6 °C 27 % 30 km/h 0.0 mm Moderate 17
8 Sept 28.1 °C 28 % 28 km/h 0.0 mm Moderate 20
9 Sept 33.2 °C 35 % 27 km/h 0.0 mm Moderate 20
10 Sept 33.0 °C 41 % 30 km/h 0.1 mm Moderate 20
11 Sept 28.9 °C 46 % 50 km/h 0.0 mm High 28
12 Sept 25.3 °C 33 % 36 km/h 0.0 mm Moderate 21
13 Sept 20.0 °C 46 % 41 km/h 0.6 mm Moderate 17
14 Sept 21.0 °C 44 % 27 km/h 0.0 mm Moderate 13
15 Sept 26.4 °C 31 % 23 km/h 0.0 mm Moderate 16
16 Sept 28.6 °C 26 % 33 km/h 0.0 mm High 27
17 Sept 31.5 °C 28 % 27 km/h 0.0 mm High 25
18 Sept 30.0 °C 50 % 32 km/h 2.7 mm Moderate 20
19 Sept 30.7 °C 54 % 37 km/h 7.1 mm Very low 1
20 Sept 39.3 °C 28 % 50 km/h 0.0 mm Moderate 20
21 Sept 36.2 °C 34 % 60 km/h 0.0 mm Moderate 20
22 Sept 21.5 °C 28 % 36 km/h 0.0 mm High 27
23 Sept 26.6 °C 24 % 28 km/h 0.0 mm Moderate 18
24 Sept 32.1 °C 29 % 32 km/h 0.0 mm High 26
25 Sept 39.2 °C 27 % 49 km/h 0.0 mm High 34
26 Sept 42.2 °C 18 % 46 km/h 0.0 mm Very high 39
27 Sept 44.0 °C 17 % 65 km/h 0.0 mm Extreme 65
28 Sept 44.2 °C 19 % 59 km/h 0.0 mm Extreme 60
29 Sept 33.5 °C 39 % 45 km/h 2.7 mm Moderate 12
30 Sept after 26.1 °C 61 % 32 km/h 2.2 mm Very low 2

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 18 Aug 2026
After · 6 Oct 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 1 October 2026 the air beside the fire reached 332 µg/m³ of PM2.5. That day averaged 181: 12 times the WHO daily guideline (15).

PM2.5 peak332 µg/m³
Days over the guideline14 days
PM10337 µg/m³
Optical depth1.76
23 Aug1 Sept10 Sept19 Sept28 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 918Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Argentina

Frequently asked questions

How long did the Bermejo fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 25 August 2026 to 29 September 2026 (36 days). The perimeter dates it from 27 August 2026 to 29 September 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 19,853 hectares (198.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Bermejo (21,517 ha, 1.5 %).
What was the weather like?
During the fire the temperature reached 44.2 °C, humidity dropped to 17 % and gusts hit 65 km/h. The fire danger index (FWI) reached 65, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Argentina (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · 100 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 21,486 → 19,853 ha.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911 · 100.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 6 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 27 August 2026 to 29 September 2026. 918 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.