Skip to content
worldfires
PY · Paraguay · –

Bella Vista fire, 5 September 2019 Bella Vista

Out · last detection 11 Sept 2019, 04:25 UTC

The fire started on 5 September 2019 in Bella Vista, Paraguay, and satellites saw it burning for 7 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,965 hectares from heat detections, spread across a single municipality.

It is the 28th largest in Concepción since 2016 (of 191 with a page). Number 30 in Paraguay in 2019, of 229.

Burnt area
4,965ha
GWIS perimeter (Copernicus)
Duration
7days
5 Sept 2019 – 11 Sept 2019
Municipalities hit
1
districts
Started on
5 Sept
2019
Heat detections
152
in a single hotspot: 55 MW
Danger at start
8
Low · FWI index
Average daily power
282MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 5 Sept11 Sept
11 Sept 2019

How it evolved, day by day

5 Sept 2019 · 87 MW · 6 7 Sept 2019 · 14 MW · 3 8 Sept 2019 · 169 MW · 20 9 Sept 2019 · 464 MW · 52 10 Sept 2019 · 956 MW · 69 11 Sept 2019 · 5 MW · 2
5 Sept 8 Sept 10 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
70km/h · peak gust
22%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 3.5 mm on 12 Sept.

This area had burned before

45% of the perimeter overlaps earlier fires recorded since 2016: 848 ha in 2016, 1,483 ha in 2017, 238 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 2,211 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 3.1% of the area of London (50 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Bella Vista where it started
    4,926 ha reached on 5 Sept
    1.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area2.1 ha
Residents≈ 150

Inside the perimeter there were about 2.1 hectares of built-up land and about 150 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
5 Sept 31.3 °C 40 % 27 km/h 0.0 mm Low 8
6 Sept 30.5 °C 42 % 40 km/h 0.0 mm Moderate 16
7 Sept 36.1 °C 22 % 57 km/h 0.0 mm Very high 39
8 Sept 36.6 °C 27 % 52 km/h 0.0 mm High 37
9 Sept 36.6 °C 26 % 70 km/h 0.0 mm Extreme 51
10 Sept 35.6 °C 25 % 53 km/h 0.0 mm Very high 40
11 Sept 33.8 °C 32 % 41 km/h 0.0 mm High 30
12 Sept after 23.3 °C 73 % 34 km/h 3.5 mm Very low 1

Its twins: fires that started in the same weather

It started with an FWI of 8.4, a minimum humidity of 40% and 1 day without rain. Fires in the area that started in weather like this since 2016: 21.

FWI at the start 8.4
Minimum humidity 40 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Bella Vista fire, September 2023
2,273 ha 3 days FWI 9.1 Min. humidity 41 % 12 km away, in 2023

First rain (1 mm or more) after it ended: 4.2 mm on 4 Sept.

What happened to them

9 days
median duration
2,378 ha
median area
100 %
went past 1,000 ha
5.1 mm
rain at the end (median; 18 of 21 had it)

It was 2.1 times larger than the median of its twins and lasted 7 days, against 9 days.

Only 4 of its 21 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 3 of 21, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.1 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

3.5 mmfirst rain
12 Septthe day after it ended
70km/h · max. gust

It was considered over on 11 Sept, and on 12 Sept 3.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 18 of 21, with a median of 5.1 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 29 Aug 2019
After · 18 Sept 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 152Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Paraguay

Frequently asked questions

How long did the Bella Vista fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 5 September 2019 to 11 September 2019 (7 days). The perimeter dates it from 7 September 2019 to 11 September 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,965 hectares (49.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Bella Vista (4,926 ha, 1.2 %).
What was the weather like?
During the fire the temperature reached 36.6 °C, humidity dropped to 22 % and gusts hit 70 km/h. The fire danger index (FWI) reached 51, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Paraguay (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 21. Their median duration was 9 days and their median area 2,378 ha; 100 % went past 1,000 ha. Only 4 of its 21 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 3 of 21, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.1 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 132 · 911 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 7 September 2019 → 5 September 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 132 · 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 7 September 2019 to 11 September 2019. 152 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.