Skip to content
worldfires
PY · Paraguay · –

Bella Vista fire, 15 August 2021 Bella Vista, Yvy Ya´U, Concepcion

Out · last detection 24 Aug 2021, 17:25 UTC

The fire started on 15 August 2021 in Bella Vista, Paraguay, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 35,643 hectares from heat detections, spread across 3 municipalities.

It is the 2th largest in Concepción since 2016 (of 191 with a page). Number 3 in Paraguay in 2021, of 250.

Burnt area
35,643ha
GWIS perimeter (Copernicus)
Duration
10days
15 Aug 2021 – 24 Aug 2021
Municipalities hit
3
districts
Started on
15 Aug
2021
Heat detections
1,422
in a single hotspot: 374 MW
Danger at start
16
Moderate · FWI index
Average daily power
2.3GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 15 Aug24 Aug
24 Aug 2021

How it evolved, day by day

15 Aug 2021 · 59 MW · 6 16 Aug 2021 · 69 MW · 9 17 Aug 2021 · 263 MW · 32 18 Aug 2021 · 4,191 MW · 176 19 Aug 2021 · 12,994 MW · 373 20 Aug 2021 · 3,571 MW · 429 21 Aug 2021 · 1,649 MW · 215 22 Aug 2021 · 313 MW · 76 23 Aug 2021 · 177 MW · 39 24 Aug 2021 · 207 MW · 67
15 Aug 17 Aug 19 Aug 21 Aug 23 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
62km/h · peak gust
15%lowest humidity

It had gone 13 days without rain (1 mm or more) when it started. Rain came after the fire: 9.5 mm on 26 Aug.

This area had burned before

40% of the perimeter overlaps earlier fires recorded since 2016: 845 ha in 2016, 7,315 ha in 2017, 2,228 ha in 2018, 7,616 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 14,093 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 23% of the area of London (356 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Bella Vista where it started
    34,954 ha reached on 15 Aug
    8.8 %
  2. 247 ha reached on 17 Aug
    0.1 %
  3. 105 ha reached on 24 Aug
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area3.3 ha
Residents≈ 300

Inside the perimeter there were about 3.3 hectares of built-up land and about 300 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
15 Aug 30.4 °C 35 % 27 km/h 0.0 mm Moderate 16
16 Aug 35.5 °C 19 % 26 km/h 0.0 mm High 24
17 Aug 37.0 °C 22 % 44 km/h 0.0 mm Very high 46
18 Aug 38.5 °C 15 % 45 km/h 0.0 mm Extreme 57
19 Aug 37.6 °C 16 % 62 km/h 0.0 mm Very extreme 75
20 Aug 36.7 °C 18 % 50 km/h 0.0 mm Extreme 67
21 Aug 36.4 °C 19 % 41 km/h 0.0 mm Extreme 61
22 Aug 36.5 °C 19 % 54 km/h 0.0 mm Very extreme 72
23 Aug 37.0 °C 24 % 52 km/h 0.0 mm Extreme 61
24 Aug 36.6 °C 23 % 59 km/h 0.0 mm Extreme 64
25 Aug after 30.5 °C 30 % 45 km/h 0.5 mm Very high 40
26 Aug after 17.4 °C 71 % 36 km/h 9.5 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 16.5, a minimum humidity of 35% and 13 days without rain. Fires in the area that started in weather like this since 2016: 16.

FWI at the start 16.5
Minimum humidity 35 %
Days without rain 13
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Bella Vista fire, September 2017
2,038 ha 15 days FWI 20.3 Min. humidity 35 % 46 km away, in 2017

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

5 days
median duration
1,990 ha
median area
100 %
went past 1,000 ha
6.2 mm
rain at the end (median; 14 of 16 had it)

It was 17.9 times larger than the median of its twins and lasted 10 days, against 5 days.

None of its 16 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 2 of 16, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

9.5 mmfirst rain
26 Aug2 days after it ended
62km/h · max. gust

It was considered over on 24 Aug, and on 26 Aug 9.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 14 of 16, with a median of 6.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 8 Aug 2021
After · 31 Aug 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 1,422Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Paraguay

Frequently asked questions

How long did the Bella Vista fire last?
GWIS (Copernicus) dates it between 15 August 2021 and 24 August 2021: 10 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 35,643 hectares (356.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Bella Vista (34,954 ha, 8.8 %); Yvy Ya´U (247 ha, 0.1 %); Concepcion (105 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 38.5 °C, humidity dropped to 15 % and gusts hit 62 km/h. The fire danger index (FWI) reached 75, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Paraguay (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 16. Their median duration was 5 days and their median area 1,990 ha; 100 % went past 1,000 ha. None of its 16 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 2 of 16, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 132 · 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 132 · 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 1,422 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.