Skip to content
worldfires
BR · Brazil · –

Barreiras do Piauí fire, 6 August 2026 Barreiras do Piauí, Mateiros, Alto Parnaíba

Out · last detection 14 Aug 2026, 16:50 UTC

The fire started on 6 August 2026 in Barreiras do Piauí, Brazil, and satellites saw it burning for 9 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 10,573 hectares from heat detections, spread across 3 municipalities.

Number 116 in Brazil in 2026, of 808.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
10,573ha
GWIS perimeter (Copernicus)
Duration
9days
6 Aug 2026 – 14 Aug 2026
Municipalities hit
3
municipalities
Started on
6 Aug
2026
Heat detections
226
in a single hotspot: 156 MW
Danger at start
45
Very high · FWI index
Average daily power
516MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 6 Aug14 Aug
14 Aug 2026

How it evolved, day by day

6 Aug 2026 · 10 MW · 2 7 Aug 2026 · 88 MW · 16 8 Aug 2026 · 333 MW · 26 9 Aug 2026 · 189 MW · 9 10 Aug 2026 · 1,355 MW · 54 11 Aug 2026 · 2,416 MW · 88 12 Aug 2026 · 170 MW · 19 13 Aug 2026 · 48 MW · 9 14 Aug 2026 · 33 MW · 3
6 Aug 8 Aug 11 Aug 14 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (16 passes) and with what wind. Watch the film

The weather it burned in

34°high
51km/h · peak gust
20%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

67% of the perimeter overlaps earlier fires recorded since 2016: 19 ha in 2016, 6,056 ha in 2017, 2,165 ha in 2023, 239 ha in 2024, 537 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 7,136 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 6.7% of the area of London (106 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Barreiras do Piauí 3,264 inhabitants where it started
    9,628 ha reached on 6 Aug
    4.4 %
  2. Mateiros 2,748 inhabitants
    603 ha reached on 8 Aug
    0.1 %
  3. Alto Parnaíba 11,109 inhabitants
    415 ha reached on 10 Aug
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
6 Aug 31.4 °C 28 % 37 km/h 0.0 mm Very high 45
7 Aug 33.0 °C 25 % 34 km/h 0.0 mm Very high 40
8 Aug 33.3 °C 27 % 38 km/h 0.0 mm Very high 46
9 Aug 34.4 °C 22 % 31 km/h 0.0 mm Very high 42
10 Aug 34.5 °C 21 % 41 km/h 0.0 mm Extreme 53
11 Aug 31.3 °C 20 % 48 km/h 0.0 mm Extreme 70
12 Aug 31.0 °C 24 % 51 km/h 0.0 mm Extreme 68
13 Aug 31.5 °C 28 % 45 km/h 0.0 mm Extreme 52
14 Aug 33.1 °C 21 % 35 km/h 0.0 mm Very high 50
15 Aug after 33.7 °C 14 % 41 km/h 0.0 mm Extreme 57
16 Aug after 32.6 °C 17 % 47 km/h 0.0 mm Extreme 69
17 Aug after 31.6 °C 27 % 51 km/h 0.0 mm Extreme 67
18 Aug after 31.8 °C 24 % 45 km/h 0.0 mm Extreme 53
19 Aug after 32.1 °C 25 % 44 km/h 0.0 mm Extreme 53
20 Aug after 33.7 °C 19 % 35 km/h 0.0 mm Very high 47
21 Aug after 33.7 °C 21 % 35 km/h 0.0 mm Very high 44
22 Aug after 34.2 °C 19 % 35 km/h 0.0 mm Very high 49
23 Aug after 34.3 °C 17 % 38 km/h 0.0 mm Extreme 62
24 Aug after 34.3 °C 17 % 40 km/h 0.0 mm Extreme 64

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 30 Jul 2026
After · 21 Aug 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 14 August 2026 the air beside the fire reached 20 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak20 µg/m³
Days over the guideline0 days
PM1022 µg/m³
Optical depth0.21
4 Aug7 Aug10 Aug13 Aug16 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 226Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Barreiras do Piauí fire last?
GWIS (Copernicus) dates it between 6 August 2026 and 14 August 2026: 9 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 10,573 hectares (105.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Barreiras do Piauí (9,628 ha, 4.4 %); Mateiros (603 ha, 0.1 %); Alto Parnaíba (415 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 34.5 °C, humidity dropped to 20 % and gusts hit 51 km/h. The fire danger index (FWI) reached 70, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 226 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.