Barkly fire, 6 October 2024 Barkly
The fire started on 6 October 2024 in Barkly, Australia, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 19,723 hectares from heat detections, spread across a single municipality.
It is the 625th largest in Northern Territory since 2016 (of 3508 with a page). Number 91 in Australia in 2024, of 636.
Compare with…
Suggestions: Barkly · 2017Barkly · 2023Barkly · 2023Barkly · 2023
- Burnt area
- 19,723ha
- GWIS perimeter (Copernicus)
- Duration
- 13days
- 6 Oct 2024 – 18 Oct 2024
- Municipalities hit
- 1
- local government areas
- Started on
- 6 Oct
- 2024
- Heat detections
- 652
- in a single hotspot: 235 MW
- Danger at start
- 45
- Very high · FWI index
- Average daily power
- 509MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 9 days without rain (1 mm or more) when it started.
This area had burned before
34% of the perimeter overlaps earlier fires recorded since 2016: 3,677 ha in 2017, 793 ha in 2018, 30 ha in 2019, 2,883 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 6,795 ha that had burned before.
- 3,353 ha Barkly fire, August 2017 5,764 ha in total; the hectares shown are those it shares with this fire
- 1,508 ha Barkly fire, September 2023 15,598 ha in total; the hectares shown are those it shares with this fire
- 446 ha Barkly fire, September 2023 319,609 ha in total; the hectares shown are those it shares with this fire
- 289 ha Barkly fire, September 2023 8,047 ha in total; the hectares shown are those it shares with this fire
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Barkly where it started19,799 ha reached on 6 Oct0.1 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2025Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 6 Oct | 37.0 °C | 24 % | 29 km/h | 0.0 mm | Very high 45 |
| 7 Oct | 37.2 °C | 25 % | 31 km/h | 0.0 mm | Very high 46 |
| 8 Oct | 38.7 °C | 15 % | 38 km/h | 0.0 mm | Extreme 59 |
| 9 Oct | 38.7 °C | 10 % | 47 km/h | 0.0 mm | Extreme 68 |
| 10 Oct | 37.5 °C | 7 % | 45 km/h | 0.0 mm | Extreme 69 |
| 11 Oct | 37.6 °C | 5 % | 49 km/h | 0.0 mm | Very extreme 79 |
| 12 Oct | 38.3 °C | 8 % | 32 km/h | 0.0 mm | Extreme 64 |
| 13 Oct | 36.0 °C | 23 % | 36 km/h | 0.0 mm | Extreme 59 |
| 14 Oct | 35.6 °C | 29 % | 27 km/h | 0.0 mm | Very high 41 |
| 15 Oct | 36.5 °C | 24 % | 35 km/h | 0.0 mm | Very high 47 |
| 16 Oct | 38.2 °C | 23 % | 41 km/h | 0.0 mm | Extreme 51 |
| 17 Oct | 37.2 °C | 24 % | 47 km/h | 0.0 mm | Extreme 54 |
| 18 Oct | 37.0 °C | 25 % | 34 km/h | 0.0 mm | Very high 45 |
| 19 Oct after | 38.2 °C | 26 % | 36 km/h | 0.2 mm | Extreme 64 |
| 20 Oct after | 38.7 °C | 16 % | 45 km/h | 0.0 mm | Extreme 63 |
| 21 Oct after | 39.4 °C | 9 % | 42 km/h | 0.0 mm | Extreme 68 |
| 22 Oct after | 38.8 °C | 7 % | 31 km/h | 0.0 mm | Extreme 58 |
| 23 Oct after | 39.7 °C | 14 % | 34 km/h | 0.0 mm | Extreme 55 |
| 24 Oct after | 40.6 °C | 8 % | 47 km/h | 0.0 mm | Very extreme 85 |
| 25 Oct after | 37.7 °C | 13 % | 58 km/h | 0.0 mm | Very extreme 91 |
| 26 Oct after | 37.9 °C | 6 % | 44 km/h | 0.0 mm | Very extreme 72 |
| 27 Oct after | 39.4 °C | 6 % | 35 km/h | 0.0 mm | Extreme 69 |
| 28 Oct after | 39.5 °C | 10 % | 52 km/h | 0.0 mm | Very extreme 86 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 9 October 2024 the air beside the fire reached 55 µg/m³ of PM2.5. That day averaged 26: 1.7 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 652Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 54,245 haBarkly17 April 2024 · 26 days · 9 km away
- 47,151 haBarkly6 August 2026 · 11 days · 11 km away
- 32,481 haBarkly28 July 2017 · 8 days · 26 km away
- 34,392 haBarkly4 August 2026 · 8 days · 27 km away
- 17,511 haBarkly18 August 2026 · 7 days · 28 km away
- 15,987 haBarkly20 December 2023 · 6 days · 32 km away
Frequently asked questions
- How long did the Barkly fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 6 October 2024 to 18 October 2024 (13 days). The perimeter dates it from 6 October 2024 to 17 October 2024.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 19,723 hectares (197.2 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Barkly (19,799 ha, 0.1 %).
- What was the weather like?
- During the fire the temperature reached 38.7 °C, humidity dropped to 5 % and gusts hit 49 km/h. The fire danger index (FWI) reached 79, class Very extreme.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 000 · Emergency number and official warnings ›
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
- Dates adjusted with the VIIRS detections inside the perimeter, which said 6 October 2024 to 17 October 2024. 652 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.