Skip to content
worldfires
BR · Brazil · –

Barão de Melgaço fire, 14 September 2017 Poconé, Barão de Melgaço

Out · last detection 26 Sept 2017, 17:01 UTC

The fire started on 14 September 2017 in Barão de Melgaço, Brazil, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 9,972 hectares from heat detections, spread across 2 municipalities.

It is the 440th largest in Mato Grosso since 2016 (of 1872 with a page). Number 174 in Brazil in 2017, of 994.

Burnt area
9,972ha
GWIS perimeter (Copernicus)
Duration
13days
14 Sept 2017 – 26 Sept 2017
Municipalities hit
2
municipalities
Started on
14 Sept
2017
Heat detections
508
in a single hotspot: 138 MW
Danger at start
56
Extreme · FWI index
Average daily power
709MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 14 Sept26 Sept
26 Sept 2017

How it evolved, day by day

14 Sept 2017 · 342 MW · 22 15 Sept 2017 · 100 MW · 5 17 Sept 2017 · 7 MW · 2 18 Sept 2017 · 85 MW · 9 19 Sept 2017 · 1,251 MW · 28 20 Sept 2017 · 1,678 MW · 51 21 Sept 2017 · 300 MW · 19 22 Sept 2017 · 1,191 MW · 98 23 Sept 2017 · 1,302 MW · 113 24 Sept 2017 · 268 MW · 48 25 Sept 2017 · 597 MW · 57 26 Sept 2017 · 1,387 MW · 56
14 Sept 20 Sept 24 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

41°high
46km/h · peak gust
21%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started. Rain came after the fire: 13.1 mm on 29 Sept.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 6.3% of the area of London (100 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Poconé 31,217 inhabitants
    9,972 ha reached on 14 Sept
    0.6 %
  2. Barão de Melgaço 15,246 inhabitants where it started
    56 ha reached on 14 Sept
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area0.15 ha
Residents< 20

Inside the perimeter there were about 0.15 hectares of built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 46 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
14 Sept 38.6 °C 23 % 40 km/h 0.0 mm Extreme 56
15 Sept 39.6 °C 21 % 33 km/h 0.0 mm Very high 39
16 Sept 28.8 °C 49 % 46 km/h 0.0 mm High 34
17 Sept 29.8 °C 45 % 35 km/h 0.0 mm High 28
18 Sept 36.9 °C 30 % 18 km/h 0.0 mm High 26
19 Sept 38.7 °C 28 % 21 km/h 0.0 mm Very high 39
20 Sept 38.5 °C 26 % 34 km/h 0.0 mm Extreme 51
21 Sept 38.6 °C 32 % 31 km/h 0.0 mm Very high 41
22 Sept 37.0 °C 31 % 20 km/h 0.0 mm High 37
23 Sept 36.5 °C 32 % 26 km/h 0.0 mm Very high 39
24 Sept 36.9 °C 36 % 25 km/h 0.0 mm High 36
25 Sept 40.7 °C 28 % 18 km/h 0.4 mm High 34
26 Sept 36.2 °C 35 % 22 km/h 0.2 mm Very high 38
27 Sept after 35.6 °C 40 % 30 km/h 0.4 mm High 36
28 Sept after 32.0 °C 55 % 20 km/h 0.0 mm High 26
29 Sept after 26.9 °C 75 % 33 km/h 13.1 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 56.0, a minimum humidity of 23% and 2 days without rain. Fires in the area that started in weather like this since 2016: 36.

FWI at the start 56.0
Minimum humidity 23 %
Days without rain 2
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Corumbá fire, September 2021
75,860 ha 17 days FWI 54.8 Min. humidity 23 % 153 km away, in 2021

First rain (1 mm or more) after it ended: 1.7 mm on 4 Oct.

What happened to them

11 days
median duration
5,788 ha
median area
31 %
went past 10,000 ha
3.5 mm
rain at the end (median; 31 of 36 had it)

It was 1.7 times larger than the median of its twins and lasted 13 days, against 11 days.

Only 11 of its 36 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 5 of 36, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.5 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

13.1 mmfirst rain
29 Sept3 days after it ended
46km/h · max. gust

It was considered over on 26 Sept, and on 29 Sept 13.1 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 31 of 36, with a median of 3.5 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 7 Sept 2017
After · 3 Oct 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 508Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Barão de Melgaço fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 14 September 2017 to 26 September 2017 (13 days). The perimeter dates it from 19 September 2017 to 26 September 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 9,972 hectares (99.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Poconé (9,972 ha, 0.6 %); Barão de Melgaço (56 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 40.7 °C, humidity dropped to 21 % and gusts hit 46 km/h. The fire danger index (FWI) reached 56, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 36. Their median duration was 11 days and their median area 5,788 ha; 31 % went past 10,000 ha. Only 11 of its 36 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 5 of 36, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.5 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 19 September 2017 → 14 September 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 19 September 2017 to 26 September 2017. 508 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.