Skip to content
worldfires
BR · Brazil · –

Bandeirantes do Tocantins fire, August 2017 Bandeirantes do Tocantins, Colinas do Tocantins

Out · last detection 3 Sept 2017, 04:58 UTC

The fire started on 31 August 2017 in Bandeirantes do Tocantins, Brazil, and satellites saw it burning for 4 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,745 hectares from heat detections, spread across 2 municipalities.

It is the 745th largest in Tocantins since 2016 (of 1036 with a page). Number 711 in Brazil in 2017, of 994.

Burnt area
3,745ha
GWIS perimeter (Copernicus)
Duration
4days
31 Aug 2017 – 3 Sept 2017
Municipalities hit
2
municipalities
Started on
31 Aug
2017
Heat detections
87
in a single hotspot: 162 MW
Danger at start
58
Extreme · FWI index
Average daily power
616MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 31 Aug3 Sept
3 Sept 2017

How it evolved, day by day

31 Aug 2017 · 2,319 MW · 67 1 Sept 2017 · 34 MW · 13 2 Sept 2017 · 110 MW · 6 3 Sept 2017 · 1 MW · 1
31 Aug 1 Sept 2 Sept 3 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
49km/h · peak gust
21%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 2.4% of the area of London (37 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Bandeirantes do Tocantins 3,407 inhabitants where it started
    3,722 ha reached on 31 Aug
    2.4 %
  2. Colinas do Tocantins 34,233 inhabitants
    48 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area0.31 ha
Residents< 20

Inside the perimeter there were about 0.31 hectares of built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 46 % of the area in Brazil 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
31 Aug 38.1 °C 21 % 36 km/h 0.0 mm Extreme 58
1 Sept 36.2 °C 31 % 32 km/h 0.0 mm Very high 49
2 Sept 35.4 °C 28 % 47 km/h 0.0 mm Extreme 60
3 Sept 35.7 °C 24 % 49 km/h 0.0 mm Extreme 64
4 Sept after 35.3 °C 24 % 52 km/h 0.0 mm Extreme 67
5 Sept after 36.2 °C 28 % 50 km/h 0.0 mm Extreme 64
6 Sept after 37.1 °C 27 % 40 km/h 0.0 mm Extreme 60
7 Sept after 37.2 °C 28 % 40 km/h 0.0 mm Extreme 58
8 Sept after 36.7 °C 29 % 40 km/h 0.0 mm Extreme 55
9 Sept after 37.3 °C 25 % 43 km/h 0.0 mm Extreme 62
10 Sept after 37.6 °C 25 % 49 km/h 0.0 mm Extreme 64
11 Sept after 38.0 °C 21 % 45 km/h 0.0 mm Extreme 61
12 Sept after 37.3 °C 21 % 48 km/h 0.0 mm Extreme 68
13 Sept after 36.9 °C 23 % 41 km/h 0.0 mm Extreme 58

Its twins: fires that started in the same weather

It started with an FWI of 57.9, a minimum humidity of 21% and more than two months without rain. Fires in the area that started in weather like this since 2016: 22.

FWI at the start 57.9
Minimum humidity 21 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Bernardo Sayão fire, September 2017
3,243 ha 4 days FWI 58.0 Min. humidity 21 % 53 km away, in 2017

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

10 days
median duration
4,508 ha
median area
5 %
went past 10,000 ha
2.2 mm
rain at the end (median; 10 of 22 had it)

It burned an area similar to its twins (3,745 ha against a median of 4,508 ha) and lasted 4 days, against 10 days.

In 12 of 22, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
49km/h · max. gust

It was considered over on 3 Sept, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 10 of 22, with a median of 2.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 24 Aug 2017
After · 10 Sept 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 87Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Bandeirantes do Tocantins fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 31 August 2017 to 3 September 2017 (4 days). The perimeter dates it from 31 August 2017 to 2 September 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,745 hectares (37.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Bandeirantes do Tocantins (3,722 ha, 2.4 %); Colinas do Tocantins (48 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 38.1 °C, humidity dropped to 21 % and gusts hit 49 km/h. The fire danger index (FWI) reached 64, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 22. Their median duration was 10 days and their median area 4,508 ha; 5 % went past 10,000 ha. In 12 of 22, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 2 September 2017 → 3 September 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 31 August 2017 to 2 September 2017. 87 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.