Skip to content
worldfires
BR · Brazil · –

Baixa Grande do Ribeiro fire, 28 September 2022 Baixa Grande do Ribeiro

Out · last detection 9 Oct 2022, 17:22 UTC

The fire started on 28 September 2022 in Baixa Grande do Ribeiro, Brazil, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 7,185 hectares from heat detections, spread across a single municipality.

It is the 158th largest in Piaui since 2016 (of 665 with a page). Number 184 in Brazil in 2022, of 682.

Burnt area
7,185ha
GWIS perimeter (Copernicus)
Duration
12days
28 Sept 2022 – 9 Oct 2022
Municipalities hit
1
municipalities
Started on
28 Sept
2022
Heat detections
224
in a single hotspot: 282 MW
Danger at start
42
Very high · FWI index
Average daily power
392MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 28 Sept9 Oct
9 Oct 2022

How it evolved, day by day

28 Sept 2022 · 16 MW · 1 29 Sept 2022 · 98 MW · 19 30 Sept 2022 · 33 MW · 4 1 Oct 2022 · 1,114 MW · 38 2 Oct 2022 · 247 MW · 18 3 Oct 2022 · 718 MW · 39 4 Oct 2022 · 433 MW · 28 5 Oct 2022 · 88 MW · 12 6 Oct 2022 · 129 MW · 14 7 Oct 2022 · 230 MW · 25 8 Oct 2022 · 1,434 MW · 15 9 Oct 2022 · 167 MW · 11
28 Sept 1 Oct 4 Oct 8 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
47km/h · peak gust
16%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started.

This area had burned before

28% of the perimeter overlaps earlier fires recorded since 2016: 419 ha in 2018, 1,560 ha in 2019, 52 ha in 2020.

How big is it?

10 km
It burned the equivalent of 4.5% of the area of London (72 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Baixa Grande do Ribeiro 13,272 inhabitants where it started
    7,236 ha reached on 28 Sept
    0.9 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
28 Sept 36.4 °C 18 % 38 km/h 0.0 mm Very high 42
29 Sept 37.1 °C 20 % 37 km/h 0.0 mm Very high 40
30 Sept 37.0 °C 19 % 35 km/h 0.0 mm Very high 45
1 Oct 37.1 °C 18 % 44 km/h 0.0 mm Extreme 54
2 Oct 37.2 °C 16 % 37 km/h 0.0 mm Very high 46
3 Oct 36.6 °C 16 % 32 km/h 0.0 mm Very high 42
4 Oct 36.5 °C 19 % 30 km/h 0.0 mm Very high 44
5 Oct 37.9 °C 19 % 40 km/h 0.0 mm Extreme 55
6 Oct 37.1 °C 22 % 47 km/h 0.0 mm Extreme 62
7 Oct 36.6 °C 24 % 46 km/h 0.0 mm Extreme 55
8 Oct 37.3 °C 24 % 24 km/h 0.0 mm Very high 45
9 Oct 36.8 °C 24 % 42 km/h 0.0 mm Extreme 57
10 Oct after 35.9 °C 25 % 42 km/h 0.0 mm Extreme 57
11 Oct after 35.7 °C 20 % 46 km/h 0.0 mm Extreme 57
12 Oct after 36.3 °C 19 % 44 km/h 0.0 mm Extreme 54
13 Oct after 36.4 °C 21 % 45 km/h 0.0 mm Very high 50
14 Oct after 37.6 °C 19 % 41 km/h 0.0 mm Very high 50
15 Oct after 37.3 °C 20 % 44 km/h 0.0 mm Extreme 54
16 Oct after 35.4 °C 24 % 45 km/h 0.0 mm Extreme 54
17 Oct after 36.2 °C 21 % 39 km/h 0.0 mm Extreme 53
18 Oct after 36.6 °C 18 % 44 km/h 0.0 mm Extreme 60
19 Oct after 37.4 °C 19 % 44 km/h 0.0 mm Extreme 58

Its twins: fires that started in the same weather

It started with an FWI of 42.1, a minimum humidity of 18% and 2 days without rain. Fires in the area that started in weather like this since 2016: 22.

FWI at the start 42.1
Minimum humidity 18 %
Days without rain 2
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Santa Filomena fire, September 2021
17,067 ha 14 days FWI 42.8 Min. humidity 20 % 55 km away, in 2021

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

11 days
median duration
4,252 ha
median area
9 %
went past 10,000 ha
2.0 mm
rain at the end (median; 16 of 22 had it)

It was 1.7 times larger than the median of its twins and lasted 12 days, against 11 days.

Only 5 of its 22 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 6 of 22, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
47km/h · max. gust

It was considered over on 9 Oct, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 16 of 22, with a median of 2.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 21 Sept 2022
After · 16 Oct 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 4 October 2022 the air beside the fire reached 72 µg/m³ of PM2.5. That day averaged 37: 2.5 times the WHO daily guideline (15).

PM2.5 peak72 µg/m³
Days over the guideline8 days
PM10102 µg/m³
Optical depth0.52
26 Sept30 Sept4 Oct8 Oct12 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 224Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Baixa Grande do Ribeiro fire last?
GWIS (Copernicus) dates it between 28 September 2022 and 9 October 2022: 12 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 7,185 hectares (71.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Baixa Grande do Ribeiro (7,236 ha, 0.9 %).
What was the weather like?
During the fire the temperature reached 37.9 °C, humidity dropped to 16 % and gusts hit 47 km/h. The fire danger index (FWI) reached 62, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 22. Their median duration was 11 days and their median area 4,252 ha; 9 % went past 10,000 ha. Only 5 of its 22 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 6 of 22, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 224 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.