Skip to content
worldfires
PY · Paraguay · –

Bahía Negra fire, June 2019 Bahía Negra

Out · last detection 15 Jun 2019, 17:44 UTC

The fire started on 4 June 2019 in Bahía Negra, Paraguay, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,690 hectares from heat detections, spread across a single municipality.

It is the 307th largest in ALTO PARAGUAY since 2016 (of 383 with a page). Number 181 in Paraguay in 2019, of 229.

Burnt area
1,690ha
GWIS perimeter (Copernicus)
Duration
12days
4 Jun 2019 – 15 Jun 2019
Municipalities hit
1
districts
Started on
4 Jun
2019
Heat detections
143
in a single hotspot: 160 MW
Danger at start
1
Very low · FWI index
Average daily power
180MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 4 Jun15 Jun
15 Jun 2019

How it evolved, day by day

4 Jun 2019 · 13 MW · 1 5 Jun 2019 · 131 MW · 17 6 Jun 2019 · 387 MW · 23 7 Jun 2019 · 1,155 MW · 47 8 Jun 2019 · 52 MW · 21 9 Jun 2019 · 93 MW · 9 10 Jun 2019 · 53 MW · 8 11 Jun 2019 · 24 MW · 6 12 Jun 2019 · 11 MW · 4 13 Jun 2019 · 62 MW · 6 15 Jun 2019 · 2 MW · 1
4 Jun 7 Jun 10 Jun 13 Jun

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
51km/h · peak gust
38%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 2.5 mm on 19 Jun.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 1.1% of the area of London (17 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Bahía Negra where it started
    1,696 ha reached on 4 Jun
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
4 Jun 25.1 °C 63 % 19 km/h 0.0 mm Very low 1
5 Jun 28.4 °C 52 % 28 km/h 0.0 mm Very low 4
6 Jun 31.2 °C 43 % 35 km/h 0.0 mm Low 11
7 Jun 31.7 °C 45 % 32 km/h 0.0 mm Moderate 12
8 Jun 27.1 °C 64 % 20 km/h 0.0 mm Low 8
9 Jun 30.4 °C 52 % 33 km/h 0.0 mm Low 9
10 Jun 32.0 °C 44 % 39 km/h 0.0 mm Moderate 15
11 Jun 33.0 °C 44 % 43 km/h 0.0 mm Moderate 17
12 Jun 34.2 °C 39 % 51 km/h 0.0 mm High 25
13 Jun 34.9 °C 39 % 46 km/h 0.0 mm High 24
14 Jun 32.5 °C 46 % 40 km/h 0.0 mm High 21
15 Jun 34.0 °C 38 % 46 km/h 0.0 mm High 28
16 Jun after 32.7 °C 43 % 28 km/h 0.0 mm Moderate 16
17 Jun after 26.5 °C 59 % 24 km/h 0.0 mm Low 10
18 Jun after 32.2 °C 44 % 43 km/h 0.0 mm High 23
19 Jun after 25.8 °C 57 % 32 km/h 2.5 mm Low 9

Its twins: fires that started in the same weather

It started with an FWI of 0.7, a minimum humidity of 63% and 1 day without rain. Fires in the area that started in weather like this since 2016: 15.

FWI at the start 0.7
Minimum humidity 63 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Fuerte Olimpo fire, September 2023
2,975 ha 5 days FWI 0.4 Min. humidity 62 % 74 km away, in 2023

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

10 days
median duration
2,144 ha
median area
100 %
went past 1,000 ha
6.0 mm
rain at the end (median; 14 of 15 had it)

It burned an area similar to its twins (1,690 ha against a median of 2,144 ha) and lasted 12 days, against 10 days.

In 1 of 15, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.5 mmfirst rain
19 Jun4 days after it ended
51km/h · max. gust

It was considered over on 15 Jun, and on 19 Jun 2.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 14 of 15, with a median of 6.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 28 May 2019
After · 22 Jun 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 143Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Paraguay

Frequently asked questions

How long did the Bahía Negra fire last?
GWIS (Copernicus) dates it between 4 June 2019 and 15 June 2019: 12 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,690 hectares (16.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Bahía Negra (1,696 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 34.9 °C, humidity dropped to 38 % and gusts hit 51 km/h. The fire danger index (FWI) reached 28, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Paraguay (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 15. Their median duration was 10 days and their median area 2,144 ha; 100 % went past 1,000 ha. In 1 of 15, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 132 · 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 132 · 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 143 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.