Skip to content
worldfires
PY · Paraguay · –

Bahía Negra fire, 12 August 2019 Bahía Negra

Out · last detection

The fire started on in Bahía Negra, Paraguay, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 12,520 hectares from heat detections, spread across a single municipality.

It is number 14 by size of the 383 fires with a page that started in ALTO PARAGUAY since 2016. Number 6 in Paraguay in 2019, of 229.

Burnt area
12,520ha
GWIS perimeter (Copernicus)
Duration
13days
12 Aug 2019 – 24 Aug 2019
Municipalities hit
1
districts
Started on
12 Aug
2019
Heat detections
406
in a single hotspot: 268 MW
Danger at start
50
Extreme · FWI index
Average daily power
1.5GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 12 Aug24 Aug
24 Aug 2019

How it evolved, day by day

12 Aug 2019 · 2,500 MW · 23 13 Aug 2019 · 2 MW · 1 14 Aug 2019 · 20 MW · 5 15 Aug 2019 · 1,444 MW · 41 16 Aug 2019 · 9,917 MW · 180 17 Aug 2019 · 429 MW · 71 18 Aug 2019 · 1,665 MW · 59 19 Aug 2019 · 135 MW · 14 20 Aug 2019 · 98 MW · 3 21 Aug 2019 · 56 MW · 7 24 Aug 2019 · 59 MW · 2
12 Aug 16 Aug 21 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
65km/h · peak gust
25%lowest humidity

It had gone 23 days without rain (1 mm or more) when it started. Rain came after the fire: 5.8 mm on 26 Aug.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 7.9% of the area of London (125 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Bahía Negra where it started
    12,545 ha reached on 12 Aug
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 11 % of the area in Paraguay

Day High Min. humidity Peak gust Rain Danger (FWI)
12 Aug 36.3 °C 25 % 49 km/h 0.0 mm Extreme 50
13 Aug 27.7 °C 33 % 55 km/h 0.0 mm Very high 40
14 Aug 22.3 °C 32 % 41 km/h 0.0 mm High 27
15 Aug 31.4 °C 36 % 29 km/h 0.0 mm High 28
16 Aug 34.7 °C 25 % 48 km/h 0.0 mm Very high 45
17 Aug 37.1 °C 26 % 65 km/h 0.0 mm Extreme 68
18 Aug 35.3 °C 32 % 61 km/h 0.0 mm Extreme 58
19 Aug 26.5 °C 40 % 41 km/h 0.0 mm High 33
20 Aug 27.5 °C 38 % 28 km/h 0.0 mm High 29
21 Aug 30.8 °C 37 % 26 km/h 0.0 mm High 28
22 Aug 35.3 °C 31 % 43 km/h 0.0 mm High 32
23 Aug 31.1 °C 38 % 43 km/h 0.0 mm High 34
24 Aug 35.7 °C 30 % 32 km/h 0.0 mm High 36
25 Aug after 36.2 °C 29 % 45 km/h 0.5 mm Very high 46
26 Aug after 36.0 °C 36 % 38 km/h 5.8 mm High 36

Its twins: fires that started in the same weather

It started with an FWI of 50.3, a minimum humidity of 25% and 23 days without rain. Fires in the area that started in weather like this since 2016: 58.

FWI at the start 50.3
Minimum humidity 25 %
Days without rain 23
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Bahía Negra fire, September 2019
3,313 ha 3 days FWI 50.4 Min. humidity 25 % 93 km away, in 2019

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

8 days
median duration
4,416 ha
median area
22 %
went past 10,000 ha
4.0 mm
rain at the end (median; 43 of 58 had it)

It was 2.8 times larger than the median of its twins and lasted 13 days, against 8 days.

Only 10 of its 58 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 15 of 58, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

5.8 mmfirst rain
26 Aug2 days after it ended
65km/h · max. gust

It was considered over on 24 Aug, and on 26 Aug 5.8 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 43 of 58, with a median of 4.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 5 Aug 2019
After · 31 Aug 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 406Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Paraguay

Frequently asked questions

How long did the Bahía Negra fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 12 August 2019 to 24 August 2019 (13 days). The perimeter dates it from 12 August 2019 to 21 August 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 12,520 hectares (125.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Bahía Negra (12,545 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 37.1 °C, humidity dropped to 25 % and gusts hit 65 km/h. The fire danger index (FWI) reached 68, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Paraguay (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 58. Their median duration was 8 days and their median area 4,416 ha; 22 % went past 10,000 ha. Only 10 of its 58 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 15 of 58, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 132 · 911 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 21 August 2019 → 24 August 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 132 · 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 12 August 2019 to 21 August 2019. 406 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.