Skip to content
worldfires
PY · Paraguay · –

Bahía Negra fire, 24 August 2017 Bahía Negra

Out · last detection 2 Sept 2017, 17:50 UTC

The fire started on 24 August 2017 in Bahía Negra, Paraguay, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,692 hectares from heat detections, spread across a single municipality.

It is the 306th largest in ALTO PARAGUAY since 2016 (of 383 with a page). Number 215 in Paraguay in 2017, of 261.

Burnt area
1,692ha
GWIS perimeter (Copernicus)
Duration
10days
24 Aug 2017 – 2 Sept 2017
Municipalities hit
1
districts
Started on
24 Aug
2017
Heat detections
82
in a single hotspot: 461 MW
Danger at start
20
Moderate · FWI index
Average daily power
543MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 24 Aug2 Sept
2 Sept 2017

How it evolved, day by day

24 Aug 2017 · 3,899 MW · 26 25 Aug 2017 · 168 MW · 27 26 Aug 2017 · 62 MW · 9 27 Aug 2017 · 14 MW · 4 30 Aug 2017 · 1 MW · 1 31 Aug 2017 · 19 MW · 1 1 Sept 2017 · 74 MW · 9 2 Sept 2017 · 105 MW · 5
24 Aug 26 Aug 30 Aug 1 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high
56km/h · peak gust
26%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started. Rain came after the fire: 1.7 mm on 11 Sept.

This area had burned before

52% of the perimeter overlaps earlier fires recorded since 2016: 881 ha in 2016.

How big is it?

10 km
It burned the equivalent of 1.1% of the area of London (17 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Bahía Negra where it started
    1,696 ha reached on 24 Aug
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Strong wind: 23 % of the area in Paraguay

Day High Min. humidity Peak gust Rain Danger (FWI)
24 Aug 35.2 °C 43 % 53 km/h 0.0 mm Moderate 20
25 Aug 36.1 °C 37 % 56 km/h 0.0 mm High 28
26 Aug 36.3 °C 40 % 56 km/h 0.2 mm High 26
27 Aug 36.4 °C 36 % 47 km/h 0.0 mm High 24
28 Aug 37.4 °C 33 % 44 km/h 0.0 mm High 30
29 Aug 38.5 °C 31 % 47 km/h 0.0 mm High 35
30 Aug 30.1 °C 45 % 45 km/h 0.0 mm High 28
31 Aug 28.5 °C 38 % 35 km/h 0.0 mm Moderate 18
1 Sept 36.7 °C 34 % 28 km/h 0.0 mm Moderate 18
2 Sept 38.7 °C 26 % 47 km/h 0.0 mm High 38
3 Sept after 37.8 °C 30 % 48 km/h 0.0 mm Very high 42
4 Sept after 38.4 °C 27 % 37 km/h 0.0 mm High 37
5 Sept after 27.4 °C 47 % 48 km/h 0.0 mm High 30
6 Sept after 33.1 °C 36 % 34 km/h 0.0 mm High 22
7 Sept after 37.2 °C 24 % 47 km/h 0.0 mm Extreme 51
8 Sept after 37.4 °C 26 % 53 km/h 0.0 mm Extreme 52
9 Sept after 37.6 °C 33 % 60 km/h 0.0 mm Extreme 59
10 Sept after 37.9 °C 35 % 69 km/h 0.1 mm Extreme 68
11 Sept after 30.3 °C 41 % 43 km/h 1.7 mm High 26

Its twins: fires that started in the same weather

It started with an FWI of 19.9, a minimum humidity of 43% and 3 days without rain. Fires in the area that started in weather like this since 2016: 22.

FWI at the start 19.9
Minimum humidity 43 %
Days without rain 3
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Bahía Negra fire, September 2018
1,828 ha 3 days FWI 19.1 Min. humidity 43 % 59 km away, in 2018

First rain (1 mm or more) after it ended: 3.5 mm on 27 Sept.

What happened to them

8 days
median duration
3,039 ha
median area
100 %
went past 1,000 ha
3.0 mm
rain at the end (median; 18 of 22 had it)

It stayed below its twins: 1,692 ha against a median of 3,039 ha. It lasted 10 days, against 8 days.

In 4 of 22, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.7 mmfirst rain
11 Sept9 days after it ended
56km/h · max. gust

It was considered over on 2 Sept, and on 11 Sept 1.7 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 18 of 22, with a median of 3.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 17 Aug 2017
After · 9 Sept 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 82Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Paraguay

Frequently asked questions

How long did the Bahía Negra fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 24 August 2017 to 2 September 2017 (10 days). The perimeter dates it from 24 August 2017 to 27 August 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,692 hectares (16.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Bahía Negra (1,696 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 38.7 °C, humidity dropped to 26 % and gusts hit 56 km/h. The fire danger index (FWI) reached 38, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Paraguay (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 22. Their median duration was 8 days and their median area 3,039 ha; 100 % went past 1,000 ha. In 4 of 22, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 132 · 911 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 27 August 2017 → 2 September 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 132 · 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 24 August 2017 to 27 August 2017. 82 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.