Skip to content
worldfires
BR · Brazil · →

Aveiro fire, September 2026 Aveiro

Dying down · last detection 25 Oct 2026, 05:25 UTC

The fire started on 26 September 2026 in Aveiro, Brazil, and satellites saw it burning for 29 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 11,035 hectares from heat detections, spread across a single municipality.

It is the 214th largest in Pará since 2016 (of 1098 with a page). Number 101 in Brazil in 2026, of 751.

Compare with…

Suggestions: Aveiro · 2026Itaituba · 2026

Is it still active?

No detections since 25 Oct 2026, 05:25 UTC. That usually means no flame is visible from space any more, although hotspots may remain. Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.

Burnt area
11,035ha
GWIS perimeter (Copernicus)
Duration
29days
26 Sept 2026 – 24 Oct 2026
Municipalities hit
1
municipalities
Started on
26 Sept
2026
Heat detections
469
in a single hotspot: 285 MW
Danger at start
9
Low · FWI index
Average daily power
225MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 26 Sept24 Oct
25 Oct 2026

How it evolved, day by day

30 Sept 2026 · 147 MW · 13 1 Oct 2026 · 26 MW · 4 2 Oct 2026 · 13 MW · 8 3 Oct 2026 · 10 MW · 4 4 Oct 2026 · 735 MW · 39 5 Oct 2026 · 37 MW · 19 6 Oct 2026 · 84 MW · 13 7 Oct 2026 · 10 MW · 5 8 Oct 2026 · 89 MW · 29 9 Oct 2026 · 228 MW · 38 10 Oct 2026 · 642 MW · 52 11 Oct 2026 · 245 MW · 28 12 Oct 2026 · 22 MW · 10 13 Oct 2026 · 29 MW · 5 14 Oct 2026 · 374 MW · 41 15 Oct 2026 · 406 MW · 38 17 Oct 2026 · 714 MW · 52 21 Oct 2026 · 3 MW · 1 22 Oct 2026 · 955 MW · 13 23 Oct 2026 · 49 MW · 13 24 Oct 2026 · 94 MW · 35 25 Oct 2026 · 41 MW · 9
30 Sept 4 Oct 8 Oct 12 Oct 17 Oct 22 Oct 24 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
40km/h · peak gust
33%lowest humidity

It had gone one day without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 7% of the area of London (110 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Aveiro 18,290 inhabitants where it started
    11,110 ha reached on 30 Sept
    0.6 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area1.4 ha
Residents≈ 250

Inside the perimeter there were about 1.4 hectares of built-up land and about 250 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
26 Sept 36.8 °C 33 % 34 km/h 6.7 mm Low 9
27 Sept 36.5 °C 37 % 30 km/h 1.5 mm Moderate 16
28 Sept 33.0 °C 55 % 24 km/h 3.9 mm Very low 4
29 Sept 33.8 °C 47 % 28 km/h 0.3 mm Moderate 12
30 Sept 36.5 °C 36 % 32 km/h 0.2 mm Moderate 21
1 Oct 36.5 °C 40 % 35 km/h 0.3 mm High 22
2 Oct 35.3 °C 38 % 34 km/h 0.8 mm Moderate 20
3 Oct 36.0 °C 39 % 35 km/h 0.7 mm High 21
4 Oct 37.3 °C 35 % 32 km/h 1.0 mm Moderate 21
5 Oct 35.3 °C 43 % 35 km/h 0.9 mm Moderate 19
6 Oct 34.6 °C 45 % 40 km/h 0.2 mm High 24
7 Oct 35.7 °C 33 % 40 km/h 0.7 mm High 28
8 Oct 36.3 °C 33 % 40 km/h 0.0 mm High 29
9 Oct 36.6 °C 34 % 37 km/h 0.0 mm High 29
10 Oct 36.8 °C 33 % 36 km/h 0.0 mm High 29

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 19 Sept 2026
After · 24 Oct 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 8 October 2026 the air beside the fire reached 142 µg/m³ of PM2.5. That day averaged 82: 5.4 times the WHO daily guideline (15).

PM2.5 peak142 µg/m³
Days over the guideline15 days
PM10147 µg/m³
Optical depth1.89
24252627282930123456789
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 469Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil ›

Frequently asked questions

How long did the Aveiro fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 26 September 2026 to 24 October 2026 (29 days). The perimeter dates it from 26 September 2026 to 17 October 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 11,035 hectares (110.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Aveiro (11,110 ha, 0.6 %).
Is the Aveiro fire still active?
No fire detections since 25 Oct 2026, 05:25 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 37.3 °C, humidity dropped to 33 % and gusts hit 40 km/h. The fire danger index (FWI) reached 29, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings ›

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

No changes since 24 October 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 26 September 2026 to 17 October 2026. 469 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.