Aracataca fire, February 2024 Aracataca
The fire started on 26 February 2024 in Aracataca, Colombia, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,036 hectares from heat detections, spread across a single municipality.
Number 50 in Colombia in 2024, of 73.
The power measured by the satellite is low (23.0 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.
- Burnt area
- 2,036ha
- GWIS perimeter (Copernicus)
- Duration
- 10days
- 26 Feb 2024 – 6 Mar 2024
- Municipalities hit
- 1
- municipalities
- Started on
- 26 Feb
- 2024
- Heat detections
- 55
- in a single hotspot: 23 MW
- Danger at start
- 7
- Low · FWI index
- Energy released
- 309MW
- sum of detected power
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 9.6 mm on 18 Mar.
This area had burned before
73% of the perimeter overlaps earlier fires recorded since 2016: 1,161 ha in 2016, 859 ha in 2019, 1,230 ha in 2020. Part of it burned more than once, so the yearly figures add up to more than the 1,481 ha that had burned before.
What happened to each town
-
Aracataca where it started2,048 ha reached on 25 Feb1.2 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 25 Feb | 33.3 °C | 55 % | 26 km/h | 0.1 mm | Low 7 |
| 26 Feb | 33.4 °C | 47 % | 25 km/h | 0.0 mm | Low 10 |
| 27 Feb | 33.5 °C | 46 % | 28 km/h | 0.0 mm | Low 11 |
| 28 Feb | 35.2 °C | 37 % | 29 km/h | 0.0 mm | Moderate 14 |
| 29 Feb | 35.0 °C | 37 % | 30 km/h | 0.0 mm | Moderate 15 |
| 1 Mar | 35.1 °C | 38 % | 30 km/h | 0.0 mm | Moderate 16 |
| 2 Mar | 34.3 °C | 43 % | 30 km/h | 0.0 mm | Moderate 16 |
| 3 Mar | 34.8 °C | 42 % | 28 km/h | 0.0 mm | Moderate 17 |
| 4 Mar | 34.1 °C | 48 % | 31 km/h | 0.0 mm | Moderate 16 |
| 5 Mar | 35.1 °C | 48 % | 30 km/h | 0.0 mm | Moderate 17 |
| 6 Mar | 34.4 °C | 52 % | 27 km/h | 0.0 mm | Moderate 16 |
| 7 Mar after | 35.8 °C | 48 % | 25 km/h | 0.0 mm | Moderate 16 |
| 8 Mar after | 34.6 °C | 57 % | 23 km/h | 0.2 mm | Moderate 14 |
| 9 Mar after | 34.0 °C | 63 % | 28 km/h | 0.6 mm | Low 11 |
| 10 Mar after | 33.5 °C | 68 % | 28 km/h | 0.2 mm | Low 11 |
| 11 Mar after | 33.5 °C | 62 % | 30 km/h | 0.6 mm | Low 11 |
| 12 Mar after | 34.8 °C | 51 % | 26 km/h | 0.1 mm | Moderate 14 |
| 13 Mar after | 36.0 °C | 45 % | 24 km/h | 0.0 mm | Moderate 16 |
| 14 Mar after | 35.5 °C | 53 % | 24 km/h | 0.0 mm | Moderate 16 |
| 15 Mar after | 34.6 °C | 55 % | 26 km/h | 0.8 mm | Moderate 12 |
| 16 Mar after | 35.5 °C | 51 % | 23 km/h | 0.0 mm | Moderate 14 |
| 17 Mar after | 35.9 °C | 50 % | 26 km/h | 0.0 mm | Moderate 16 |
| 18 Mar after | 36.6 °C | 44 % | 26 km/h | 9.6 mm | Very low 3 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 7 March 2024 the air beside the fire reached 46 µg/m³ of PM2.5. That day averaged 34: 2.3 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 55Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Aracataca fire last?
- GWIS (Copernicus) dates it between 26 February 2024 and 6 March 2024: 10 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,036 hectares (20.4 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Aracataca (2,048 ha, 1.2 %).
- What was the weather like?
- During the fire the temperature reached 35.8 °C, humidity dropped to 37 % and gusts hit 31 km/h. The fire danger index (FWI) reached 17, class Moderate.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Colombia (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 123 · 119
Satellite cross-check
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.