Skip to content
worldfires
BR · Brazil · –

Aquidauana fire, 19 September 2017 Aquidauana, Miranda

Out · last detection 28 Sept 2017, 05:33 UTC

The fire started on 19 September 2017 in Aquidauana, Brazil, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,540 hectares from heat detections, spread across 2 municipalities.

It is the 214th largest in Mato Grosso do Sul since 2016 (of 496 with a page). Number 313 in Brazil in 2017, of 994.

Burnt area
6,540ha
GWIS perimeter (Copernicus)
Duration
10days
19 Sept 2017 – 28 Sept 2017
Municipalities hit
2
municipalities
Started on
19 Sept
2017
Heat detections
277
in a single hotspot: 93 MW
Danger at start
57
Extreme · FWI index
Average daily power
363MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 19 Sept28 Sept
28 Sept 2017

How it evolved, day by day

19 Sept 2017 · 130 MW · 3 20 Sept 2017 · 458 MW · 21 21 Sept 2017 · 864 MW · 60 22 Sept 2017 · 1,216 MW · 93 23 Sept 2017 · 214 MW · 23 24 Sept 2017 · 25 MW · 10 25 Sept 2017 · 6 MW · 2 26 Sept 2017 · 451 MW · 29 27 Sept 2017 · 207 MW · 31 28 Sept 2017 · 61 MW · 5
19 Sept 22 Sept 25 Sept 27 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high
38km/h · peak gust
19%lowest humidity

It had gone 31 days without rain (1 mm or more) when it started. Rain came after the fire: 5.6 mm on 29 Sept.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 4.1% of the area of London (65 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Aquidauana 46,803 inhabitants where it started
    5,733 ha reached on 19 Sept
    0.3 %
  2. Miranda 25,536 inhabitants
    847 ha reached on 20 Sept
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 46 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
19 Sept 38.6 °C 19 % 35 km/h 0.0 mm Extreme 57
20 Sept 38.8 °C 19 % 38 km/h 0.0 mm Extreme 60
21 Sept 37.3 °C 24 % 31 km/h 0.0 mm Extreme 54
22 Sept 35.0 °C 30 % 26 km/h 0.0 mm Very high 43
23 Sept 34.8 °C 32 % 32 km/h 0.0 mm Very high 38
24 Sept 35.6 °C 29 % 28 km/h 0.0 mm High 34
25 Sept 36.2 °C 28 % 37 km/h 0.4 mm Very high 39
26 Sept 35.9 °C 30 % 22 km/h 0.0 mm High 33
27 Sept 37.0 °C 26 % 17 km/h 0.0 mm High 38
28 Sept 27.9 °C 58 % 29 km/h 0.8 mm High 30
29 Sept after 30.0 °C 51 % 27 km/h 5.6 mm Low 8

Its twins: fires that started in the same weather

It started with an FWI of 57.0, a minimum humidity of 19% and 31 days without rain. Fires in the area that started in weather like this since 2016: 27.

FWI at the start 57.0
Minimum humidity 19 %
Days without rain 31
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Fuerte Olimpo fire, October 2020
4,608 ha 7 days FWI 57.6 Min. humidity 19 % 231 km away, in 2020

First rain (1 mm or more) after it ended: 4.1 mm on 15 Oct.

What happened to them

9 days
median duration
4,951 ha
median area
26 %
went past 10,000 ha
9.9 mm
rain at the end (median; 25 of 27 had it)

It burned an area similar to its twins (6,540 ha against a median of 4,951 ha) and lasted 10 days, against 9 days.

In 2 of 27, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 9.9 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

5.6 mmfirst rain
29 Septthe day after it ended
38km/h · max. gust

It was considered over on 28 Sept, and on 29 Sept 5.6 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 25 of 27, with a median of 9.9 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 12 Sept 2017
After · 5 Oct 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 277Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Aquidauana fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 19 September 2017 to 28 September 2017 (10 days). The perimeter dates it from 19 September 2017 to 27 September 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,540 hectares (65.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Aquidauana (5,733 ha, 0.3 %); Miranda (847 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 38.8 °C, humidity dropped to 19 % and gusts hit 38 km/h. The fire danger index (FWI) reached 60, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 27. Their median duration was 9 days and their median area 4,951 ha; 26 % went past 10,000 ha. In 2 of 27, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 9.9 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 27 September 2017 → 28 September 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 19 September 2017 to 27 September 2017. 277 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.